Advanced PPPoE
Figure 8. Advanced PPPoE
The screen is required in order to use multiple
PPPoE sessions on the same WAN port.
It can also be used to manually connect or disconnect a PPPoE session.
Settings - Advanced PPPoE
WAN Port | Select the desired Port and Session, then click the “Select” button. The data for the selected Port/Session will then be displayed in the |
PPPoE Session | WAN IP Account section. |
WAN IP Account | • User Name – Enter the PPPoE user name assigned by your ISP. |
| • Password – Enter the PPPoE password assigned by your ISP. |
| • Verify Password – |
| • IP Address – If you have a fixed IP address, enter it here. Otherwise, this field should be left at 0.0.0.0. |
| • Host Name – This field is used by a Host to uniquely associate an access concentrator to a particular Host request. |
Action | Use the “Connect” and “Disconnect” buttons to establish or terminate a connection on this session. |
Connection Status | This displays the current connection status for each session. |
19