XiNCOM XC-DPG602 manual Advanced LAN Conﬁguration, Existing Dhcp Server

Page 45

Chapter 10 - Advanced LAN Conﬁguration

XC-DPG602

Twin WAN DNS → IP Gateway

Chapter Contents

•Overview

•Existing DHCP Server

•Static Routing

Overview

These settings are provided to deal with non-standard situations or to provide additional options for advanced users.

Existing DHCP Server

If your LAN already has a DHCP Server, and you wish to continue using it, the following conﬁguration is required.

The DHCP Server function in the XC-DPG602 must be disabled. This setting is on the LAN & DHCP screen.

Your DHCP Server must be conﬁgured to provide the XC-DPG602’s LAN IP address as the “Default Gateway”. Your DHCP Server must provide correct DNS addresses to the PCs.

Image 45

Contents Twin WAN DNS IP Gateway Table of Contents QoS Conﬁguration DNS Conﬁguration Use TWO ISPs for expanded bandwidth and redundancy IntroductionFeatures Password Protected Conﬁguration Easy SetupHttp Firmware Upgrade and backup Dhcp Server SupportSystem Physical DetailsLED Action Condition Default SettingsOverview Basic SetupConfiguring the XC-DPG602 for your LAN ProcedureNo Response? Configuring the XC-DPG602 for your LAN Installation Diagram for XC-DPG602 Connecting two broadband modemsSettings Primary Setup Connection Mode Configuring for Internet AccessConnection Type Address InfoTCP/IP Settings Configure PCs on your LANInternet Access OverviewFor Linux Clients For Apple ClientsFixed IP Address To act as a Dhcp Client recommendedAdvanced Port Port Options Health Check Auto Dialup Bridge ModeLoad Balance Settings Load BalanceAdvanced PPPoE Settings Advanced PPPoEAdvanced Pptp Settings Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Virtual ServersCustom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server ListSettings Special Applications Special ApplicationsSpecial Application Settings Dynamic DNS To use the Dynamic DNS FeatureDynamic DNS Dynamic DNSFor Dynamic IP Multi DMZ & UPnPSelect the desired WAN port Private IP AddressAdvanced Features Advanced FeaturesSettings Advanced Features HTTP// Internet IP Address of the XC-DPG602 Using Remote Web-based SetupFirewall Exception Security ManagementAccess Filter Block URLBlock URL Session Limit Session Limit & Firewall ExceptionQoS Conﬁguration Conﬁgure DNS DNS ConﬁgurationXC-DPG602 & 603 Gateways How it worksDomain Name Configuration Public WAN 1 & 2 IP Address NS Record Primary/Secondary Name ServerMX Record Mail Exchange Preference 1Record Map Host URLCname Record Host URL ListSnmp Simple Network Management Protocol Management AssistantEmail Alert System InformationSyslog Management AssistantSyslog Conﬁguration Message StatusUpgrade Firmware Admin Password ScreenUsing the Tftp Utility Recommended Updating the Firmware Backup your conﬁguration Uploading the Firmware Http Upgrade Firmware To upload the ﬁrmware to the router Restoring Saved ConﬁgurationOperation & Status Operation & Status OverviewSystem Status Operation & Status Restore Factory DefaultsWAN Status NAT StatusExisting Dhcp Server Advanced LAN ConﬁgurationStatic Routing Advanced LAN Configuration192.168.2.0 Conﬁguring other Routers on you LAN255.255.255.0 192.168.1.100Operating Temperature DimensionsStorage Temperature External Power AdapterChecking TCP/IP Settings Windows 9x/ME TCP/IP SettingsUsing Dhcp Using Specify an IP AddressUsing a ﬁxed IP Address Use the following IP Address Checking TCP/IP Settings WindowsFigure G. Network Conﬁguration Windows XP Checking TCP/IP Settings Windows XPOverview Troubleshooting

Related manuals

Manual 52 pages 37.28 Kb