XiNCOM XC-DPG602 manual Settings Advanced Pptp

Page 20

Advanced PPTP

Figure 9. Advanced PPTP

Settings - Advanced PPTP

WAN Port

Select the desired Port and click the “Select” button. The data for the selected Port will then be displayed in the WAN IP Account section.

WAN IP Account

User Name – The PPTP user name (login name) assigned by your ISP.

 

Password – This field is associated with the User Name above. This is assigned by your ISP and used to login to the PPTP Server.

 

Verify Password Re-enter the PPTP password assigned by your ISP.

 

IP Address – Enter the IP address of the PPTP Server. (This is provided by your ISP)

 

Static IP Address – If you have a fixed IP address, enter if here. Otherwise, this field should be left at 0.0.0.0.

Action

Use the “Connect” and “Disconnect” buttons to establish or terminate a connection on this session.

Connection Status

This displays the current connection status.

20

Image 20
Contents Twin WAN DNS IP Gateway Table of Contents QoS Configuration DNS Configuration Introduction Use TWO ISPs for expanded bandwidth and redundancyFeatures Easy Setup Password Protected ConfigurationHttp Firmware Upgrade and backup Dhcp Server SupportPhysical Details SystemDefault Settings LED Action ConditionBasic Setup OverviewNo Response? Configuring the XC-DPG602 for your LANProcedure Configuring the XC-DPG602 for your LAN Connecting two broadband modems Installation Diagram for XC-DPG602Configuring for Internet Access Settings Primary Setup Connection ModeConnection Type Address InfoConfigure PCs on your LAN TCP/IP SettingsInternet Access OverviewFor Apple Clients For Linux ClientsFixed IP Address To act as a Dhcp Client recommendedAdvanced Port Health Check Auto Dialup Bridge Mode Port OptionsSettings Load Balance Load BalanceSettings Advanced PPPoE Advanced PPPoESettings Advanced Pptp Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Virtual ServersSettings Custom Virtual Servers Custom Virtual ServersCustom Virtual Servers Server ListSpecial Application Settings Special ApplicationsSpecial Applications To use the Dynamic DNS Feature Settings Dynamic DNSDynamic DNS Dynamic DNSMulti DMZ & UPnP For Dynamic IPSelect the desired WAN port Private IP AddressSettings Advanced Features Advanced FeaturesAdvanced Features Using Remote Web-based Setup HTTP// Internet IP Address of the XC-DPG602Security Management Firewall ExceptionBlock URL Access FilterBlock URL Session Limit & Firewall Exception Session LimitQoS Configuration DNS Configuration Configure DNSHow it works XC-DPG602 & 603 GatewaysDomain Name Configuration NS Record Primary/Secondary Name Server Public WAN 1 & 2 IP AddressMX Record Mail Exchange Preference 1Map Host URL RecordCname Record Host URL ListManagement Assistant Snmp Simple Network Management ProtocolEmail Alert System InformationManagement Assistant SyslogSyslog Configuration Message StatusAdmin Password Screen Upgrade FirmwareUsing the Tftp Utility Recommended Updating the Firmware Backup your configurationHttp Upgrade Firmware Uploading the FirmwareTo upload the firmware to the router Restoring Saved ConfigurationSystem Status Operation & StatusOperation & Status Overview Restore Factory Defaults Operation & StatusWAN Status NAT StatusAdvanced LAN Configuration Existing Dhcp ServerAdvanced LAN Configuration Static RoutingConfiguring other Routers on you LAN 192.168.2.0255.255.255.0 192.168.1.100Dimensions Operating TemperatureStorage Temperature External Power AdapterTCP/IP Settings Checking TCP/IP Settings Windows 9x/MEUsing Dhcp Using Specify an IP AddressChecking TCP/IP Settings Windows Using a fixed IP Address Use the following IP AddressChecking TCP/IP Settings Windows XP Figure G. Network Configuration Windows XPTroubleshooting Overview
Related manuals
Manual 52 pages 37.28 Kb