XiNCOM XC-DPG602 manual Checking TCP/IP Settings Windows

Page 50

Appendices

On the DNS Configuration tab, ensure Enable DNS is selected. If the DNS Server Search Order list is empty, enter the DNS address provided by your ISP in the fields beside the Add button, then click Add.

Figure D. DNS Tab (Windows 95/98)

Checking TCP/IP Settings - Windows 2000:

1.Select Control Panel - Network and Dial-up Connection.

2.Right click the Local Area Connection icon and select Properties. You should see a screen like the following:

Figure E. Network Configuration (Windows 2000)

3.Select the TCP/IP protocol for your network card.

4.Click on the Properties button. You should then see a screen like the following.

Figure F. TCP/IP Properties (Windows 2000)

5. Ensure your TCP/IP settings are correct:

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows settings.

Restart your PC to ensure it obtains an IP Address from the XC-DPG602.

Using a fixed IP Address (“Use the following IP Address”)

If your PC is already configured, check with your network administrator before making the following changes:

Enter the IP address of the XC-DPG602 in the Default gateway field and click OK.

(Your LAN administrator can advise you of the IP Address they assigned to the XC-DPG602)

If the DNS Server fields are empty, select Use the following DNS server addresses. Enter the DNS address or addresses provided by your ISP and then click OK.

50

Image 50
Contents Twin WAN DNS IP Gateway Table of Contents QoS Configuration DNS Configuration Introduction Use TWO ISPs for expanded bandwidth and redundancyFeatures Http Firmware Upgrade and backup Easy SetupPassword Protected Configuration Dhcp Server SupportPhysical Details SystemDefault Settings LED Action ConditionBasic Setup OverviewNo Response? Configuring the XC-DPG602 for your LANProcedure Configuring the XC-DPG602 for your LAN Connecting two broadband modems Installation Diagram for XC-DPG602Connection Type Configuring for Internet AccessSettings Primary Setup Connection Mode Address InfoInternet Access Configure PCs on your LANTCP/IP Settings OverviewFixed IP Address For Apple ClientsFor Linux Clients To act as a Dhcp Client recommendedAdvanced Port Health Check Auto Dialup Bridge Mode Port OptionsSettings Load Balance Load BalanceSettings Advanced PPPoE Advanced PPPoESettings Advanced Pptp Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Virtual ServersCustom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server ListSpecial Application Settings Special ApplicationsSpecial Applications Dynamic DNS To use the Dynamic DNS FeatureSettings Dynamic DNS Dynamic DNSSelect the desired WAN port Multi DMZ & UPnPFor Dynamic IP Private IP AddressSettings Advanced Features Advanced FeaturesAdvanced Features Using Remote Web-based Setup HTTP// Internet IP Address of the XC-DPG602Security Management Firewall ExceptionBlock URL Access FilterBlock URL Session Limit & Firewall Exception Session LimitQoS Configuration DNS Configuration Configure DNSHow it works XC-DPG602 & 603 GatewaysDomain Name Configuration MX Record Mail Exchange NS Record Primary/Secondary Name ServerPublic WAN 1 & 2 IP Address Preference 1Cname Record Map Host URLRecord Host URL ListEmail Alert Management AssistantSnmp Simple Network Management Protocol System InformationSyslog Configuration Management AssistantSyslog Message StatusUsing the Tftp Utility Recommended Admin Password ScreenUpgrade Firmware Updating the Firmware Backup your configurationTo upload the firmware to the router Http Upgrade FirmwareUploading the Firmware Restoring Saved ConfigurationSystem Status Operation & StatusOperation & Status Overview WAN Status Restore Factory DefaultsOperation & Status NAT StatusAdvanced LAN Configuration Existing Dhcp ServerAdvanced LAN Configuration Static Routing255.255.255.0 Configuring other Routers on you LAN192.168.2.0 192.168.1.100Storage Temperature DimensionsOperating Temperature External Power AdapterUsing Dhcp TCP/IP SettingsChecking TCP/IP Settings Windows 9x/ME Using Specify an IP AddressChecking TCP/IP Settings Windows Using a fixed IP Address Use the following IP AddressChecking TCP/IP Settings Windows XP Figure G. Network Configuration Windows XPTroubleshooting Overview
Related manuals
Manual 52 pages 37.28 Kb