XiNCOM XC-DPG602 Admin Password Screen, Upgrade Firmware, Using the Tftp Utility Recommended

Page 41

Management Assistant

Admin Password Screen

The password screen allows you to assign a password to the XC-DPG602.

Enter the desired password. Re-enter the password in the Verify Password field and then save it.

When you connect to the XC-DPG602 with your Browser, you will be prompted for the password when you connect, as shown below.

Enter “Admin” for the User Name.

Enter the password for the XC-

DPG602 as set on the Admin

Password screen above.

Upgrade Firmware

Using the TFTP Utility (Recommended)

The XC-DPG602 Twin WAN Router supports the Trivial File Transfer Protocol (TFTP). This is mainly used to upload the firmware to the device. It can also be used to save and upload the configuration and reset the router to defaults. This guide will show you how to perform all those actions along with the proper procedure for upgrading your XC-DPG602 to the latest firmware release.

Updating the Firmware

To update the firmware on your XC-DPG602 you must first download the firmware from the XiNCOM Support web page (http://www.xincom.com/support) You will need an unzipping utility such as WinZip (www.winzip.com) or WinRAR (www.rarlab.com) to extract the contents of the file. Included will be a README file (usually README.txt), TFTP (tftp.exe) utility and the firmware file ({name}. bin).

Backup your configuration

When you update the firmware on the XC-DPG602 the default configuration overwrites any settings that you previously entered into the router. You will need to save the configuration of the file to the router. There are two ways to do this, the TFTP utility and the HTTP user interface. This section covers only the TFTP utility, you can learn how to update using the HTTP utility in the Admin Control section.

To save the XC-DPG602 Configuration to a file:

1.Open the TFTP utility by double clicking on it.

2.Enter the routers IP address (Default is: 192.168.1.1)

3.Enter a file name that you would like to save the file as (Example: config-file.bin).

4.Press the Upload button and the file will be saved to the same directory as the TFTP utility.

41

Image 41
Contents Twin WAN DNS IP Gateway Table of Contents QoS Configuration DNS Configuration Use TWO ISPs for expanded bandwidth and redundancy IntroductionFeatures Password Protected Configuration Easy SetupHttp Firmware Upgrade and backup Dhcp Server SupportSystem Physical DetailsLED Action Condition Default SettingsOverview Basic SetupNo Response? Configuring the XC-DPG602 for your LANProcedure Configuring the XC-DPG602 for your LAN Installation Diagram for XC-DPG602 Connecting two broadband modemsSettings Primary Setup Connection Mode Configuring for Internet AccessConnection Type Address InfoTCP/IP Settings Configure PCs on your LANInternet Access OverviewFor Linux Clients For Apple ClientsFixed IP Address To act as a Dhcp Client recommendedAdvanced Port Port Options Health Check Auto Dialup Bridge ModeLoad Balance Settings Load BalanceAdvanced PPPoE Settings Advanced PPPoEAdvanced Pptp Settings Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Virtual ServersCustom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server ListSpecial Application Settings Special ApplicationsSpecial Applications Settings Dynamic DNS To use the Dynamic DNS FeatureDynamic DNS Dynamic DNSFor Dynamic IP Multi DMZ & UPnPSelect the desired WAN port Private IP AddressSettings Advanced Features Advanced FeaturesAdvanced Features HTTP// Internet IP Address of the XC-DPG602 Using Remote Web-based SetupFirewall Exception Security ManagementBlock URL Access FilterBlock URL Session Limit Session Limit & Firewall ExceptionQoS Configuration Configure DNS DNS ConfigurationXC-DPG602 & 603 Gateways How it worksDomain Name Configuration Public WAN 1 & 2 IP Address NS Record Primary/Secondary Name ServerMX Record Mail Exchange Preference 1Record Map Host URLCname Record Host URL ListSnmp Simple Network Management Protocol Management AssistantEmail Alert System InformationSyslog Management AssistantSyslog Configuration Message StatusUpgrade Firmware Admin Password ScreenUsing the Tftp Utility Recommended Updating the Firmware Backup your configurationUploading the Firmware Http Upgrade FirmwareTo upload the firmware to the router Restoring Saved ConfigurationSystem Status Operation & StatusOperation & Status Overview Operation & Status Restore Factory DefaultsWAN Status NAT StatusExisting Dhcp Server Advanced LAN ConfigurationStatic Routing Advanced LAN Configuration192.168.2.0 Configuring other Routers on you LAN255.255.255.0 192.168.1.100Operating Temperature DimensionsStorage Temperature External Power AdapterChecking TCP/IP Settings Windows 9x/ME TCP/IP SettingsUsing Dhcp Using Specify an IP AddressUsing a fixed IP Address Use the following IP Address Checking TCP/IP Settings WindowsFigure G. Network Configuration Windows XP Checking TCP/IP Settings Windows XPOverview Troubleshooting
Related manuals
Manual 52 pages 37.28 Kb