XiNCOM XC-DPG602 manual Advanced LAN Configuration, Static Routing

Page 46

Advanced LAN Configuration

Static Routing

This section is only relevant if your LAN has other Routers or Gateways.

If you do not have other Routers or Gateways on your LAN, skip the Static Routing page.

If your LAN has other Gateways and Routers, you must configure the Static Routing screen as described below. You also need to configure the other Routers.

Note: If there is an entry or entries in the Routing table with an Index of zero ( 0 ), these are System entries. You can not modify or delete these entries.

Settings - Static Routing

Entry Index

• If adding a new entry, skip this field.

 

• To edit an existing entry, select it from the list, and click the “Select” button. The screen will then update with the data for the selected entry.

 

• If the Index is 0, this is a System entry which you can neither delete nor modify.

Network Address

The network address of the remote LAN segment. For standard class “C” LANs, the network address is the first 3 fields of the Destination IP Address. The 4th (last) field

 

can be left at 0.

Netmask

The Network Mask for the remote LAN segment. For class “C” networks, the default mask is 255.255.255.0

Gateway

The IP Address of the Gateway or Router which the XC-DPG602 must use to communicate with the destination above. (NOT the router attached to the remote segment.)

Interface

Select the correct interface (usually LAN). The WAN interface is only available if NAT (Network Address Translation) is disabled.

Metric

The number of “hops” (routers) to pass through to reach the remote LAN segment. The shortest path will be used.

46

Image 46
Contents Twin WAN DNS IP Gateway Table of Contents QoS Configuration DNS Configuration Introduction Use TWO ISPs for expanded bandwidth and redundancyFeatures Http Firmware Upgrade and backup Easy SetupPassword Protected Configuration Dhcp Server SupportPhysical Details SystemDefault Settings LED Action ConditionBasic Setup OverviewProcedure Configuring the XC-DPG602 for your LANNo Response? Configuring the XC-DPG602 for your LAN Connecting two broadband modems Installation Diagram for XC-DPG602Connection Type Configuring for Internet AccessSettings Primary Setup Connection Mode Address InfoInternet Access Configure PCs on your LANTCP/IP Settings OverviewFixed IP Address For Apple ClientsFor Linux Clients To act as a Dhcp Client recommendedAdvanced Port Health Check Auto Dialup Bridge Mode Port OptionsSettings Load Balance Load BalanceSettings Advanced PPPoE Advanced PPPoESettings Advanced Pptp Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Virtual ServersCustom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server ListSpecial Applications Settings Special ApplicationsSpecial Application Dynamic DNS To use the Dynamic DNS FeatureSettings Dynamic DNS Dynamic DNSSelect the desired WAN port Multi DMZ & UPnPFor Dynamic IP Private IP AddressAdvanced Features Advanced FeaturesSettings Advanced Features Using Remote Web-based Setup HTTP// Internet IP Address of the XC-DPG602Security Management Firewall ExceptionBlock URL Access FilterBlock URL Session Limit & Firewall Exception Session LimitQoS Configuration DNS Configuration Configure DNSHow it works XC-DPG602 & 603 GatewaysDomain Name Configuration MX Record Mail Exchange NS Record Primary/Secondary Name ServerPublic WAN 1 & 2 IP Address Preference 1Cname Record Map Host URLRecord Host URL ListEmail Alert Management AssistantSnmp Simple Network Management Protocol System InformationSyslog Configuration Management AssistantSyslog Message StatusUsing the Tftp Utility Recommended Admin Password ScreenUpgrade Firmware Updating the Firmware Backup your configurationTo upload the firmware to the router Http Upgrade FirmwareUploading the Firmware Restoring Saved ConfigurationOperation & Status Overview Operation & StatusSystem Status WAN Status Restore Factory DefaultsOperation & Status NAT StatusAdvanced LAN Configuration Existing Dhcp ServerAdvanced LAN Configuration Static Routing255.255.255.0 Configuring other Routers on you LAN192.168.2.0 192.168.1.100Storage Temperature DimensionsOperating Temperature External Power AdapterUsing Dhcp TCP/IP SettingsChecking TCP/IP Settings Windows 9x/ME Using Specify an IP AddressChecking TCP/IP Settings Windows Using a fixed IP Address Use the following IP AddressChecking TCP/IP Settings Windows XP Figure G. Network Configuration Windows XPTroubleshooting Overview
Related manuals
Manual 52 pages 37.28 Kb