XiNCOM XC-DPG602 Configuring other Routers on you LAN, 192.168.2.0, 255.255.255.0, 192.168.1.100

Page 47

Advanced LAN Configuration

Configuring other Routers on you LAN

All traffic for devices not on the local LAN must be forwarded to the XC-DPG602 so that they can be forwarded to the Internet. This is done by configuring other Routers to use the XC-DPG602 as the Default Route or Default Gateway, as illustrated by the example below:

Configuration settings for the LAN shown with 2 routers and 3 LAN segments, the XC-DPG602 requires 2 entries as follows.

For the XC-DPG602 Gateway’s Routing Table

Entry 1 (Segment 1)

 

Destination IP Address

192.168.2.0

Network Mask

255.255.255.0

Gateway IP Address

192.168.1.100

Interface

LAN

Metric

2

Entry 2 (Segment 2)

 

Destination IP Address

192.168.3.0

Network Mask

255.255.255.0 (Standard

 

Class C)

Gateway IP Address

192.168.1.100

Interface

LAN

Metric

3

For Router A’s Default Route

Destination IP Address

0.0.0.0

Network Mask

0.0.0.0

Gateway IP Address

192.168.1.1

Metric

2

For Router B’s Default Route

Destination IP Address

0.0.0.0

Network Mask

0.0.0.0

Gateway IP Address

192.168.2.80

Interface

LAN

Metric

3

47

Image 47
Contents Twin WAN DNS IP Gateway Table of Contents QoS Configuration DNS Configuration Use TWO ISPs for expanded bandwidth and redundancy IntroductionFeatures Dhcp Server Support Easy SetupPassword Protected Configuration Http Firmware Upgrade and backupSystem Physical DetailsLED Action Condition Default SettingsOverview Basic SetupNo Response? Configuring the XC-DPG602 for your LANProcedure Configuring the XC-DPG602 for your LAN Installation Diagram for XC-DPG602 Connecting two broadband modemsAddress Info Configuring for Internet AccessSettings Primary Setup Connection Mode Connection TypeOverview Configure PCs on your LANTCP/IP Settings Internet AccessTo act as a Dhcp Client recommended For Apple ClientsFor Linux Clients Fixed IP AddressAdvanced Port Port Options Health Check Auto Dialup Bridge ModeLoad Balance Settings Load BalanceAdvanced PPPoE Settings Advanced PPPoEAdvanced Pptp Settings Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Virtual ServersServer List Settings Custom Virtual ServersCustom Virtual Servers Custom Virtual ServersSpecial Application Settings Special ApplicationsSpecial Applications Dynamic DNS To use the Dynamic DNS FeatureSettings Dynamic DNS Dynamic DNSPrivate IP Address Multi DMZ & UPnPFor Dynamic IP Select the desired WAN portSettings Advanced Features Advanced FeaturesAdvanced Features HTTP// Internet IP Address of the XC-DPG602 Using Remote Web-based SetupFirewall Exception Security ManagementBlock URL Access FilterBlock URL Session Limit Session Limit & Firewall ExceptionQoS Configuration Configure DNS DNS ConfigurationXC-DPG602 & 603 Gateways How it worksDomain Name Configuration Preference 1 NS Record Primary/Secondary Name ServerPublic WAN 1 & 2 IP Address MX Record Mail ExchangeHost URL List Map Host URLRecord Cname RecordSystem Information Management AssistantSnmp Simple Network Management Protocol Email AlertMessage Status Management AssistantSyslog Syslog ConfigurationUpdating the Firmware Backup your configuration Admin Password ScreenUpgrade Firmware Using the Tftp Utility RecommendedRestoring Saved Configuration Http Upgrade FirmwareUploading the Firmware To upload the firmware to the routerSystem Status Operation & StatusOperation & Status Overview NAT Status Restore Factory DefaultsOperation & Status WAN StatusExisting Dhcp Server Advanced LAN ConfigurationStatic Routing Advanced LAN Configuration192.168.1.100 Configuring other Routers on you LAN192.168.2.0 255.255.255.0External Power Adapter DimensionsOperating Temperature Storage TemperatureUsing Specify an IP Address TCP/IP SettingsChecking TCP/IP Settings Windows 9x/ME Using DhcpUsing a fixed IP Address Use the following IP Address Checking TCP/IP Settings WindowsFigure G. Network Configuration Windows XP Checking TCP/IP Settings Windows XPOverview Troubleshooting
Related manuals
Manual 52 pages 37.28 Kb