XiNCOM XC-DPG602 manual Settings Special Applications

Page 25

Special Applications

Special Application

If you use Internet applications which have non-standard connections or port numbers, you may find that they do not function correctly because they are blocked by the XC-DPG602 firewall. In this case, you can define the application as a “Special Application” in order to make it work.

Note that the terms “Incoming” and “Outgoing” on this screen refer to traffic from the client (PC) viewpoint.

Settings - Special Applications

Select Special Application Name

Select Name Item

This lists any special applications which are currently defined.

 

• Ignore this list if adding a new Special Application. Enter your data in the Special Application Configuration section, and click the

 

“Add” button.

 

• To edit an existing entry select it from this list and click the “Select” button. The data for the selected application will then be

 

displayed in the Special Application Configuration section. Make any required changes and then click the “Update” button.

Special Application Configuration

Enable

Use this to Enable or Disable the Special Application.

Name

Enter a descriptive name to identify this Special Application.

Outgoing Protocol

Select the protocol used by this application when sending data to the remote server or PC.

Outgoing Port Range

For data being sent, enter the beginning and end of the range of port numbers used by the application server. If the application uses a

 

single port number, enter the range in both fields.

Incoming Protocol

Select the protocol used by this application, when receiving data from the remote server or PC.

Incoming Port Range

For data being recieved, enter the beginning and end of the range of port numbers used by the application server. If the application

 

uses a single port number, enter it in both fields.

Buttons

Add – Create a new Special Application entry.

 

Delete – Delete the selected entry.

 

Update – Save any changes you have made to the current entry.

 

Cancel – Cancel any changes you have made since the last save operation.

Special Application List

This shows details of all Special Applications which are currently defined.

Using a Special Application on your PC

Once the Special Applications screen is configured correctly, you can use the application on your PC normally. Remember that only one (1) PC can use each Special application at any time.

Also, when 1 PC is finished using a particular Special Application, there may need to be a “Time-out” period before another PC can use the same Special Application. If an application still cannot function correctly, try using the “DMZ” feature, if possible.

25

Image 25
Contents Twin WAN DNS IP Gateway Table of Contents QoS Configuration DNS Configuration Use TWO ISPs for expanded bandwidth and redundancy IntroductionFeatures Password Protected Configuration Easy SetupHttp Firmware Upgrade and backup Dhcp Server SupportSystem Physical DetailsLED Action Condition Default SettingsOverview Basic SetupProcedure Configuring the XC-DPG602 for your LANNo Response? Configuring the XC-DPG602 for your LAN Installation Diagram for XC-DPG602 Connecting two broadband modemsSettings Primary Setup Connection Mode Configuring for Internet AccessConnection Type Address InfoTCP/IP Settings Configure PCs on your LANInternet Access OverviewFor Linux Clients For Apple ClientsFixed IP Address To act as a Dhcp Client recommendedAdvanced Port Port Options Health Check Auto Dialup Bridge ModeLoad Balance Settings Load BalanceAdvanced PPPoE Settings Advanced PPPoEAdvanced Pptp Settings Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Virtual ServersCustom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server ListSpecial Applications Settings Special ApplicationsSpecial Application Settings Dynamic DNS To use the Dynamic DNS FeatureDynamic DNS Dynamic DNSFor Dynamic IP Multi DMZ & UPnPSelect the desired WAN port Private IP AddressAdvanced Features Advanced FeaturesSettings Advanced Features HTTP// Internet IP Address of the XC-DPG602 Using Remote Web-based SetupFirewall Exception Security ManagementBlock URL Access FilterBlock URL Session Limit Session Limit & Firewall ExceptionQoS Configuration Configure DNS DNS ConfigurationXC-DPG602 & 603 Gateways How it worksDomain Name Configuration Public WAN 1 & 2 IP Address NS Record Primary/Secondary Name ServerMX Record Mail Exchange Preference 1Record Map Host URLCname Record Host URL ListSnmp Simple Network Management Protocol Management AssistantEmail Alert System InformationSyslog Management AssistantSyslog Configuration Message StatusUpgrade Firmware Admin Password ScreenUsing the Tftp Utility Recommended Updating the Firmware Backup your configurationUploading the Firmware Http Upgrade FirmwareTo upload the firmware to the router Restoring Saved ConfigurationOperation & Status Overview Operation & StatusSystem Status Operation & Status Restore Factory DefaultsWAN Status NAT StatusExisting Dhcp Server Advanced LAN ConfigurationStatic Routing Advanced LAN Configuration192.168.2.0 Configuring other Routers on you LAN255.255.255.0 192.168.1.100Operating Temperature DimensionsStorage Temperature External Power AdapterChecking TCP/IP Settings Windows 9x/ME TCP/IP SettingsUsing Dhcp Using Specify an IP AddressUsing a fixed IP Address Use the following IP Address Checking TCP/IP Settings WindowsFigure G. Network Configuration Windows XP Checking TCP/IP Settings Windows XPOverview Troubleshooting
Related manuals
Manual 52 pages 37.28 Kb