XiNCOM XC-DPG602 manual Basic Setup, Overview

Page 9

Chapter 2 - Basic Setup

XC-DPG602

Twin WAN DNS → IP Gateway

Chapter Contents

•Overview

•Procedure

1.Conﬁguring your LAN

2.Connecting Broadband Modems

3.Conﬁguring for Internet Access

4.Conﬁguring your LAN PCs

Overview

Basic setup of your XC-DPG602 wil involve the following steps:

1.Connect the XC-DPG602 to one (1) PC and conﬁgure it to your existing LAN.

2.Connecting one or two Broadband Modems to your XC-DPG602.

3.Conﬁguring the XC-DPG602 for Interent Access.

4.Conﬁguring all PCs on your LAN to use the XC-DPG602.

Requirements:

•One or two Broadband modems (T1, xDSL, Cable, and Satillite) with an active account from your ISP(s).

•Two standard 10/100BaseT network (UTP) cables with RJ-45 connectors.

•TCP/IP network protocol must be installed on all PCs.

CAT5 Ethernet Cables

Broadband Modems

TCP/IP Enabled PCs

Image 9

Contents Twin WAN DNS IP Gateway Table of Contents QoS Conﬁguration DNS Conﬁguration Use TWO ISPs for expanded bandwidth and redundancy IntroductionFeatures Password Protected Conﬁguration Easy Setup Http Firmware Upgrade and backup Dhcp Server SupportSystem Physical DetailsLED Action Condition Default SettingsOverview Basic SetupConfiguring the XC-DPG602 for your LAN ProcedureNo Response? Configuring the XC-DPG602 for your LAN Installation Diagram for XC-DPG602 Connecting two broadband modemsSettings Primary Setup Connection Mode Configuring for Internet AccessConnection Type Address InfoTCP/IP Settings Configure PCs on your LANInternet Access OverviewFor Linux Clients For Apple ClientsFixed IP Address To act as a Dhcp Client recommendedAdvanced Port Port Options Health Check Auto Dialup Bridge ModeLoad Balance Settings Load BalanceAdvanced PPPoE Settings Advanced PPPoEAdvanced Pptp Settings Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Virtual ServersCustom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server ListSettings Special Applications Special ApplicationsSpecial Application Settings Dynamic DNS To use the Dynamic DNS FeatureDynamic DNS Dynamic DNSFor Dynamic IP Multi DMZ & UPnPSelect the desired WAN port Private IP AddressAdvanced Features Advanced FeaturesSettings Advanced Features HTTP// Internet IP Address of the XC-DPG602 Using Remote Web-based SetupFirewall Exception Security ManagementAccess Filter Block URLBlock URL Session Limit Session Limit & Firewall ExceptionQoS Conﬁguration Conﬁgure DNS DNS ConﬁgurationXC-DPG602 & 603 Gateways How it worksDomain Name Configuration Public WAN 1 & 2 IP Address NS Record Primary/Secondary Name ServerMX Record Mail Exchange Preference 1Record Map Host URLCname Record Host URL ListSnmp Simple Network Management Protocol Management AssistantEmail Alert System InformationSyslog Management AssistantSyslog Conﬁguration Message StatusUpgrade Firmware Admin Password ScreenUsing the Tftp Utility Recommended Updating the Firmware Backup your conﬁgurationUploading the Firmware Http Upgrade FirmwareTo upload the ﬁrmware to the router Restoring Saved ConﬁgurationOperation & Status Operation & Status OverviewSystem Status Operation & Status Restore Factory DefaultsWAN Status NAT StatusExisting Dhcp Server Advanced LAN ConﬁgurationStatic Routing Advanced LAN Configuration192.168.2.0 Conﬁguring other Routers on you LAN255.255.255.0 192.168.1.100Operating Temperature DimensionsStorage Temperature External Power AdapterChecking TCP/IP Settings Windows 9x/ME TCP/IP SettingsUsing Dhcp Using Specify an IP AddressUsing a ﬁxed IP Address Use the following IP Address Checking TCP/IP Settings WindowsFigure G. Network Conﬁguration Windows XP Checking TCP/IP Settings Windows XPOverview Troubleshooting

Related manuals

Manual 52 pages 37.28 Kb