XiNCOM XC-DPG602 manual To use the Dynamic DNS Feature, Settings Dynamic DNS

Page 26

Dynamic DNS

Dynamic DNS

Dynamic DNS is very useful when combined with the Virtual Server feature. It allows Internet users to connect to your Virtual Servers using a URL, rather than an IP Address. This also solves the problem of having a dynamic IP address. With a dynamic IP address, your IP address may change whenever you connect to your ISP.

You must register for the Dynamic DNS service. The XC-DPG602 supports 2 types of service providers:

Standard client, available at http://www.dyndns.org.

Other sites may offer the same service, but can not be guaranteed to work. TZO at http://www.tzo.com

3322 is available in China at http://www.3322.org

To use the Dynamic DNS Feature:

1. Register for the service from your preferred service provider.

Settings - Dynamic DNS

2. Follow the service provider’s procedure to have a Domain Name

Dynamic DNS Service

Use this to Enable/Disable the Dynamic DNS feature and select the required service

(Host name) allocated to you.

 

provider.

3. Configure the appropriate settings in the Dynamic DNS screen

 

Disable – Dynamic DNS is not used.

 

TZO – Select this to use the TZO service (www.tzo.com). You must configure the

 

 

4. The XC-DPG602 will then automatically update your IP Address

 

TZO section of this screen.

recorded by the Dynamic DNS service provider.

 

Standard Client – Select this to use the standard service (from www.dyndns.org or

5. From the Internet, users will now be able to connect to your Virtual

 

other provider). You must configure the Standard Client section of this screen.

 

3322 (in China) – This is available in China. It is similar to “Standard client”

Servers (or DMZ PC) using your Domain name.

 

 

WAN Port Binding

• Select the WAN port on which the Dynamic DNS is used.

 

 

• The “Force Update” button will update your record on the Dynamic DNS Server

 

 

immediately.

 

TZO Custom Dynamic DNS

If you have registered for this service, complete these fields:

 

Service

Key – Enter your Key as recorded on the TZO Web site.

 

 

E-mail– Enter your E-mail address as recorded on the TZO Web site.

 

 

Domain – Enter the domain name allocated to you by TZO.

 

Standard Client or 3322

If you have registered for this service, complete these fields.

 

 

User Name – Enter the user name given by the service provider.

 

 

Password – Enter the password given by the service provider.

 

 

Verity Password Re-enter the password above.

 

 

Server – Enter the name or IP address of the service provider’s server.

 

 

Host Name - Enter the domain name allocated to you by the service provider.

 

Additional Standard Client or

These options are available if using the standard client.

 

3322 Settings

Enable Wildcard – If selected, traffic sent to sub-domains (of your Domain name)

 

 

will also be forwarded to you.

 

 

Enable backup MX – If enabled, you must enter the Mail Exchanger address

 

 

below.

 

 

Mail Exchanger – If the setting above is enabled, enter the address of the backup

 

 

Mail Exchanger.

26

Image 26
Contents Twin WAN DNS IP Gateway Table of Contents QoS Configuration DNS Configuration Introduction Use TWO ISPs for expanded bandwidth and redundancyFeatures Http Firmware Upgrade and backup Easy SetupPassword Protected Configuration Dhcp Server SupportPhysical Details SystemDefault Settings LED Action ConditionBasic Setup OverviewNo Response? Configuring the XC-DPG602 for your LANProcedure Configuring the XC-DPG602 for your LAN Connecting two broadband modems Installation Diagram for XC-DPG602Connection Type Configuring for Internet AccessSettings Primary Setup Connection Mode Address InfoInternet Access Configure PCs on your LANTCP/IP Settings OverviewFixed IP Address For Apple ClientsFor Linux Clients To act as a Dhcp Client recommendedAdvanced Port Health Check Auto Dialup Bridge Mode Port OptionsSettings Load Balance Load BalanceSettings Advanced PPPoE Advanced PPPoESettings Advanced Pptp Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Virtual ServersCustom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server ListSpecial Application Settings Special ApplicationsSpecial Applications Dynamic DNS To use the Dynamic DNS FeatureSettings Dynamic DNS Dynamic DNSSelect the desired WAN port Multi DMZ & UPnPFor Dynamic IP Private IP AddressSettings Advanced Features Advanced FeaturesAdvanced Features Using Remote Web-based Setup HTTP// Internet IP Address of the XC-DPG602Security Management Firewall ExceptionBlock URL Access FilterBlock URL Session Limit & Firewall Exception Session LimitQoS Configuration DNS Configuration Configure DNSHow it works XC-DPG602 & 603 GatewaysDomain Name Configuration MX Record Mail Exchange NS Record Primary/Secondary Name ServerPublic WAN 1 & 2 IP Address Preference 1Cname Record Map Host URLRecord Host URL ListEmail Alert Management AssistantSnmp Simple Network Management Protocol System InformationSyslog Configuration Management AssistantSyslog Message StatusUsing the Tftp Utility Recommended Admin Password ScreenUpgrade Firmware Updating the Firmware Backup your configurationTo upload the firmware to the router Http Upgrade FirmwareUploading the Firmware Restoring Saved ConfigurationSystem Status Operation & StatusOperation & Status Overview WAN Status Restore Factory DefaultsOperation & Status NAT StatusAdvanced LAN Configuration Existing Dhcp ServerAdvanced LAN Configuration Static Routing255.255.255.0 Configuring other Routers on you LAN192.168.2.0 192.168.1.100Storage Temperature DimensionsOperating Temperature External Power AdapterUsing Dhcp TCP/IP SettingsChecking TCP/IP Settings Windows 9x/ME Using Specify an IP AddressChecking TCP/IP Settings Windows Using a fixed IP Address Use the following IP AddressChecking TCP/IP Settings Windows XP Figure G. Network Configuration Windows XPTroubleshooting Overview
Related manuals
Manual 52 pages 37.28 Kb