Screen snapshot – VPN
Item | Description |
Key Management | Click to select IKE or Manual mode. |
Advanced | Click Advanced button to configure more IKE |
| settings. |
Connection Type | Click to select Initiator or Responder mode. |
Connect | Click to connect manually. [Responder mode only] |
Disconnect | Click to disconnect manually. [Responder mode |
| only]. |
ESP | Click to configure 3DES, AES128 or NULL |
| encryption. |
| Click to configure MD5 or SHA1 authentication. |
PreShared Key | Fill in the key value. [IKE mode only] |
Remote RSA Key | Fill in the remote gateway RSA key. [IKE mode |
| only] |
Status | It shows connection status. [IKE mode only] |
SPI | Fill in Security Parameter Index value. [Manual |
| mode only] |
Encryption Key | Fill in encryption key. [Manual mode only] |
Authentication Key | Fill in authentication key. [Manual mode only] |
Apply Change | Click the Apply Changes button to save current |
| tunnel settings. |
Reset | Click the Reset button to abort change and recover |
| the previous configuration setting. |
Refresh | It shows the current connection status. [Manual |
| mode only] |
Back | It returns back to VPN Setup page. |
41