X-Micro Tech XWL-11GRTX Example Two Fixed IP on the WAN, Configure the Wlan interface, 168.95.1.1

Page 72

Configure the WLAN interface:

Open WLAN Interface

Setup page, enter the

SSID “MyWLAN”,

Channel Number “11”.

Press button to confirm the configuration setting.

5.2 Example Two – Fixed IP on the WAN

Company ABC likes to establish a WLAN network to support mobile communication on all employees’ Notebook PCs. MIS engineer collects information and plans the X-Micro WLAN 11g Broadband Router implementation by the following configuration.

WAN configuration:

Fixed IP

	IP Address		192.168.2.254
	Subnet Mask		255.255.255.0
	Default Gateway		192.168.2.10
LAN	DNS Address		168.95.1.1
LAN	configuration
	IP Address			192.168.1.254
	Subnet Mask			255.255.255.0
	Default Gateway			192.168.2.254
	DHCP	Client		192.168.1.100 – 192.168.1.200
	Range
WLAN configuration
	SSID			MyWLAN
	Channel Number			11

63

Image 72

Contents Wlan 11g Broadband Router MAX. OUT Power Federal Communications Commission FCC Statement Copyright DisclaimerTable of Contents Frequently Asked Questions FAQ What is WMM? What is Wlan ACK TIMOUT? Terminology VPN 1Package contents 2Product SpecificationsProduct Features Generic RouterPanel Description Wlan LEDWAN 1Hardware Installation 2Software InstallationFor OS of Microsoft Windows 95/ 98/ Me For OS of Microsoft Windows 2000, XPConnect to the X-Micro Wlan 11g Broadband Router For OS of Microsoft Windows NTItemDescription Bssid Setup Wizard Operation ModeII Time Zone Setting III LAN Interface SetupIV WAN Interface Setup Wireless Basic SettingsVI Wireless Security Setup DescriptionWireless Basic Settings Wireless Advanced Settings MAC address. Client Mode onlySystem, Shared Key or Auto selection Wireless Security Setup Wlan IC of RealtekCharacters. WPA, PersonalPre-Shared Key OnlyWEP Key Setup Wireless Access Control Click the Disabled , Allow Listed or Deny ListedWDS Settings WDS Security Setup II WDS AP TableWEP64bits, WEP128bits, Wpatkip WPA2AES or NoneSite Survey LAN Interface Setup WAN Interface Setup Information. Server mode onlyClick to open the Active Dhcp Client Table window Static IP II Dhcp Client Server III PPPoE There are Continuous , Connect on DemandIf you select the PPPoE and Connect on Demand IV Pptp Firewall Port Filtering Firewall IP Filtering Firewall MAC Filtering Firewall Port Forwarding Screen snapshot Firewall Port Forwarding Firewall URL Filtering Firewall DMZVPN Setting Enable DMZ Click to enable the DMZ functionScreen snapshot VPN Setup VPN Setup Edit Tunnel Mode only II Advanced IKE Setup Click to select DH1modp768 , DH2modp1024 orManagement Statistics Sent PacketsReceived Packets Management Time Zone Setting Management DdnsManagement Denial-of-Service Management Log Management Upgrade Firmware Management Save/ Reload Settings Management Password Setup Management WatchDogManagement Quality of Service Screen snapshot Management Qaulity of Service Logout Bandwidth Control TableRemoved from the Current Bandwidth Control Addresses Current Bandwidth Control Table1What and how to find my PC’s IP and MAC address? 2What is Wireless LAN?4How does wireless networking work? 3What are ISM bands?5What is BSSID? 6What is ESSID?8What are the Open System and Shared Key authentications? 9What is WEP?What is Fragment Threshold? What is RTS Request To Send Threshold? What is Beacon Interval?What is Preamble Type? What is Ssid Broadcast?What is Wi-Fi Protected Access WPA? What is WPA2?What is 802.1x Authentication? What is Temporal Key Integrity Protocol TKIP?What is Advanced Encryption Standard AES? What is Inter-Access Point Protocol IAPP?What is Maximum Transmission Unit MTU Size? What is Clone MAC Address?What is DDNS? What is NTP Client?What is Wlan ACK TIMOUT? Example One PPPoE on the WAN Configure the WAN interface Configure the LAN interfaceConfigure the Wlan interface Example Two Fixed IP on the WAN192.168.2.254 192.168.2.10Configuration Example Two Fixed IP on the WAN Configure the WAN interface Configure the Wlan interface