X-Micro Tech XWL-11GRTX user manual 1Hardware Installation, 2Software Installation

Page 14

2 Installation

2.1Hardware Installation

Step 1: Place the Wireless LAN Broadband Router to the best optimum transmission location. The best transmission location for your X-Micro WLAN 11g Broadband Router is usually at the geographic center of your wireless network, with line of sign to all of your mobile stations.

Step 2: Connect the X-Micro WLAN 11g Broadband Router to your wired network. Connect the Ethernet WAN interface of X-Micro WLAN 11g Broadband Router by category 5 Ethernet cable to your switch/ hub/ xDSL modem or cable modem. A straight-through Ethernet cable with appropriate cable length is needed.

Step 3: Supply DC power to the X-Micro WLAN 11g Broadband Router. Use only the AC/DC power adapter supplied with the X-Micro WLAN 11g Broadband Router; it may occur damage by using a different type of power adapter.

The hardware installation finished.

2.2Software Installation

¾There are no software drivers, patches or utilities installation needed, but only the configuration setting. Please refer to chapter 3 for software configuration.

Notice: It will take about 55 seconds to complete the boot up sequence after powered on the X-Micro WLAN 11g Broadband Router; Power LED will be active, and after that the WLAN Activity LED will be flashing to show the WLAN interface is enabled and working now.

5

Image 14

Contents Wlan 11g Broadband Router MAX. OUT Power Federal Communications Commission FCC Statement Copyright DisclaimerTable of Contents Frequently Asked Questions FAQ What is WMM? What is Wlan ACK TIMOUT? Terminology VPN 1Package contents 2Product SpecificationsProduct Features Generic RouterPanel Description Wlan LEDWAN 1Hardware Installation 2Software InstallationFor OS of Microsoft Windows 95/ 98/ Me For OS of Microsoft Windows 2000, XPConnect to the X-Micro Wlan 11g Broadband Router For OS of Microsoft Windows NTItemDescription Bssid Setup Wizard Operation ModeII Time Zone Setting III LAN Interface SetupIV WAN Interface Setup Wireless Basic SettingsVI Wireless Security Setup DescriptionWireless Basic Settings Wireless Advanced Settings MAC address. Client Mode onlySystem, Shared Key or Auto selection Wireless Security Setup Wlan IC of RealtekCharacters. WPA, PersonalPre-Shared Key OnlyWEP Key Setup Wireless Access Control Click the Disabled , Allow Listed or Deny ListedWDS Settings WEP64bits, WEP128bits, Wpatkip WDS Security SetupII WDS AP Table WPA2AES or NoneSite Survey LAN Interface Setup Click to open the Active Dhcp Client Table window WAN Interface SetupInformation. Server mode only Static IP II Dhcp Client Server III PPPoE There are Continuous , Connect on DemandIf you select the PPPoE and Connect on Demand IV Pptp Firewall Port Filtering Firewall IP Filtering Firewall MAC Filtering Firewall Port Forwarding Screen snapshot Firewall Port Forwarding Firewall URL Filtering Firewall DMZVPN Setting Enable DMZ Click to enable the DMZ functionScreen snapshot VPN Setup VPN Setup Edit Tunnel Mode only II Advanced IKE Setup Click to select DH1modp768 , DH2modp1024 orReceived Packets Management StatisticsSent Packets Management Time Zone Setting Management DdnsManagement Denial-of-Service Management Log Management Upgrade Firmware Management Save/ Reload Settings Management Password Setup Management WatchDogManagement Quality of Service Screen snapshot Management Qaulity of Service Removed from the Current Bandwidth Control LogoutBandwidth Control Table Addresses Current Bandwidth Control Table4How does wireless networking work? 1What and how to find my PC’s IP and MAC address?2What is Wireless LAN? 3What are ISM bands?5What is BSSID? 6What is ESSID?What is Fragment Threshold? 8What are the Open System and Shared Key authentications?9What is WEP? What is RTS Request To Send Threshold? What is Beacon Interval?What is Wi-Fi Protected Access WPA? What is Preamble Type?What is Ssid Broadcast? What is WPA2?What is Advanced Encryption Standard AES? What is 802.1x Authentication?What is Temporal Key Integrity Protocol TKIP? What is Inter-Access Point Protocol IAPP?What is DDNS? What is Maximum Transmission Unit MTU Size?What is Clone MAC Address? What is NTP Client?What is Wlan ACK TIMOUT? Example One PPPoE on the WAN Configure the WAN interface Configure the LAN interface192.168.2.254 Configure the Wlan interfaceExample Two Fixed IP on the WAN 192.168.2.10Configuration Example Two Fixed IP on the WAN Configure the WAN interface Configure the Wlan interface