X-Micro Tech XWL-11GRTX user manual If you select the PPPoE and Connect on Demand

Page 39

 

setup the connection through PPPoE protocol

 

whenever you send the data packets out through the

 

WAN interface; there are a watchdog implemented

 

to close the PPPoE connection while there are no

 

data sent out longer than the idle time set.

 

Manual connection type means to setup the

 

connection through the PPPoE protocol by clicking

 

the Connect button manually, and clicking the

 

Disconnect button manually.

Idle Time

If you select the PPPoE and Connect on Demand

 

connection type, fill in the idle time for

 

auto-disconnect function. Value can be between 1

 

and 1000 minutes.

MTU Size

Fill in the mtu size of MTU Size. The default value is

 

1400. Refer to 4.23 What is Maximum Transmission

 

 

 

 

Unit (MTU) Size?

Attain DNS

Click to select getting DNS address for PPPoE

Automatically

support. Please select Set DNS Manually if the

 

PPPoE support is selected.

Set DNS Manually

Click to select getting DNS address for Static IP

 

support.

DNS 1

Fill in the IP address of Domain Name Server 1.

DNS 2

Fill in the IP address of Domain Name Server 2.

DNS 3

Fill in the IP address of Domain Name Server 3.

Clone MAC Address

Fill in the MAC address that is the MAC address to

 

be cloned. Refer to 4.24 What is Clone MAC

 

Address?

Enable uPNP

Click the checkbox to enable uPNP function.

 

Refer to 4.22 What is Universal Plug and Play

 

(uPNP)?

Enable Web Server

Click the checkbox to enable web configuration from

Access on WAN

WAN side.

Enable WAN Echo

Click the checkbox to enable WAN ICMP response.

Reply

 

 

Set TTL value

Click to Enable and set Time to Live value.

Apply Changes

Click the Apply Changes button to complete the

 

new configuration setting.

Reset

Click the Reset button to abort change and recover

 

the previous configuration setting.

30

Image 39
Contents Wlan 11g Broadband Router MAX. OUT Power Federal Communications Commission FCC Statement Disclaimer CopyrightTable of Contents Frequently Asked Questions FAQ What is WMM? What is Wlan ACK TIMOUT? Terminology VPN 2Product Specifications 1Package contentsGeneric Router Product FeaturesWlan LED Panel DescriptionWAN 2Software Installation 1Hardware InstallationFor OS of Microsoft Windows 2000, XP For OS of Microsoft Windows 95/ 98/ MeFor OS of Microsoft Windows NT Connect to the X-Micro Wlan 11g Broadband RouterItemDescription Bssid Operation Mode Setup WizardIII LAN Interface Setup II Time Zone SettingWireless Basic Settings IV WAN Interface SetupDescription VI Wireless Security SetupWireless Basic Settings MAC address. Client Mode only Wireless Advanced SettingsSystem, Shared Key or Auto selection Wlan IC of Realtek Wireless Security SetupOnly Characters. WPA, PersonalPre-Shared KeyWEP Key Setup Click the Disabled , Allow Listed or Deny Listed Wireless Access ControlWDS Settings WPA2AES or None WDS Security SetupII WDS AP Table WEP64bits, WEP128bits, WpatkipSite Survey LAN Interface Setup WAN Interface Setup Information. Server mode onlyClick to open the Active Dhcp Client Table window Static IP II Dhcp Client Server There are Continuous , Connect on Demand III PPPoEIf you select the PPPoE and Connect on Demand IV Pptp Firewall Port Filtering Firewall IP Filtering Firewall MAC Filtering Firewall Port Forwarding Screen snapshot Firewall Port Forwarding Firewall DMZ Firewall URL FilteringEnable DMZ Click to enable the DMZ function VPN SettingScreen snapshot VPN Setup VPN Setup Edit Tunnel Mode only Click to select DH1modp768 , DH2modp1024 or II Advanced IKE SetupManagement Statistics Sent PacketsReceived Packets Management Ddns Management Time Zone SettingManagement Denial-of-Service Management Log Management Upgrade Firmware Management Save/ Reload Settings Management WatchDog Management Password SetupManagement Quality of Service Screen snapshot Management Qaulity of Service Addresses Current Bandwidth Control Table LogoutBandwidth Control Table Removed from the Current Bandwidth Control3What are ISM bands? 1What and how to find my PC’s IP and MAC address?2What is Wireless LAN? 4How does wireless networking work?6What is ESSID? 5What is BSSID?8What are the Open System and Shared Key authentications? 9What is WEP?What is Fragment Threshold? What is Beacon Interval? What is RTS Request To Send Threshold?What is WPA2? What is Preamble Type?What is Ssid Broadcast? What is Wi-Fi Protected Access WPA?What is Inter-Access Point Protocol IAPP? What is 802.1x Authentication?What is Temporal Key Integrity Protocol TKIP? What is Advanced Encryption Standard AES?What is NTP Client? What is Maximum Transmission Unit MTU Size?What is Clone MAC Address? What is DDNS?What is Wlan ACK TIMOUT? Example One PPPoE on the WAN Configure the LAN interface Configure the WAN interface192.168.2.10 Configure the Wlan interfaceExample Two Fixed IP on the WAN 192.168.2.254Configuration Example Two Fixed IP on the WAN Configure the WAN interface Configure the Wlan interface