X-Micro Tech XWL-11GRTX user manual Wireless Advanced Settings, MAC address. Client Mode only

Item	Description
Disable Wireless LAN Click on to disable the wireless LAN data
Interface	transmission.
Band	Click to select 2.4GHz(B) / 2.4GHz(G) /
	2.4GHz(B+G)
Mode	Click to select the WLAN AP / Client / WDS /
	AP+WDS wireless mode.
Site Survey	The Site Survey button provides tool to scan the
	wireless network. If any Access Point or IBSS is
	found, you could choose to connect it manually
	when client mode is enabled. Refer to 3.3.9 Site
	Survey.
SSID	It is the wireless network name. The SSID can be 32
	bytes long.
Channel Number	Select the wireless communication channel from
	pull-down menu.
Associated Clients	Click the Show Active Clients button to open Active
	Wireless Client Table that shows the MAC address,
	transmit-packet, receive-packet and
	transmission-rate for each associated wireless
	client.
Enable Mac Clone	Take Laptop NIC MAC address as wireless client
(Single Ethernet	MAC address. [Client Mode only]
Client)
Enable Universal	Click to enable Universal Repeater Mode
Repeater Mode
SSID of Extended	Assign SSID when enables Universal Repeater
Interface	Mode.
Apply Changes	Click the Apply Changes button to complete the
	new configuration setting.
Reset	Click the Reset button to abort change and recover
	the previous configuration setting.

3.3.5 Wireless - Advanced Settings

These settings are only for more technically advanced users who have a sufficient knowledge about wireless LAN. These settings should not be changed unless you know what effect the changes will have on your X-Micro WLAN 11g Broadband Router.

15