X-Micro Tech XWL-11GRTX user manual Configure the WAN interface, Configure the LAN interface

Page 71

Configure the WAN interface:

Open WAN Interface Setup page, select PPPoE then enter the User Name “H890123456” and Password “PW192867543210”, the password is encrypted to display on the screen.

Press button to confirm the configuration setting.

Configure the LAN interface:

Open LAN Interface Setup page, enter the IP Address “192.168.1.254”, Subnet Mask “255.255.255.0”, Default Gateway “0.0.0.0”, enable DHCP Server, DHCP client range “192.168.1.100” to “192.168.1.200”.

Press button to confirm the configuration setting.

62

Image 71

Contents Wlan 11g Broadband Router MAX. OUT Power Federal Communications Commission FCC Statement Disclaimer CopyrightTable of Contents Frequently Asked Questions FAQ What is WMM? What is Wlan ACK TIMOUT? Terminology VPN 2Product Specifications 1Package contentsGeneric Router Product FeaturesWlan LED Panel DescriptionWAN 2Software Installation 1Hardware InstallationFor OS of Microsoft Windows 2000, XP For OS of Microsoft Windows 95/ 98/ MeFor OS of Microsoft Windows NT Connect to the X-Micro Wlan 11g Broadband RouterItemDescription Bssid Operation Mode Setup WizardIII LAN Interface Setup II Time Zone SettingWireless Basic Settings IV WAN Interface SetupDescription VI Wireless Security SetupWireless Basic Settings MAC address. Client Mode only Wireless Advanced SettingsSystem, Shared Key or Auto selection Wlan IC of Realtek Wireless Security SetupOnly Characters. WPA, PersonalPre-Shared KeyWEP Key Setup Click the Disabled , Allow Listed or Deny Listed Wireless Access ControlWDS Settings WPA2AES or None WDS Security SetupII WDS AP Table WEP64bits, WEP128bits, WpatkipSite Survey LAN Interface Setup Click to open the Active Dhcp Client Table window WAN Interface SetupInformation. Server mode only Static IP II Dhcp Client Server There are Continuous , Connect on Demand III PPPoEIf you select the PPPoE and Connect on Demand IV Pptp Firewall Port Filtering Firewall IP Filtering Firewall MAC Filtering Firewall Port Forwarding Screen snapshot Firewall Port Forwarding Firewall DMZ Firewall URL FilteringEnable DMZ Click to enable the DMZ function VPN SettingScreen snapshot VPN Setup VPN Setup Edit Tunnel Mode only Click to select DH1modp768 , DH2modp1024 or II Advanced IKE SetupReceived Packets Management StatisticsSent Packets Management Ddns Management Time Zone SettingManagement Denial-of-Service Management Log Management Upgrade Firmware Management Save/ Reload Settings Management WatchDog Management Password SetupManagement Quality of Service Screen snapshot Management Qaulity of Service Addresses Current Bandwidth Control Table LogoutBandwidth Control Table Removed from the Current Bandwidth Control3What are ISM bands? 1What and how to find my PC’s IP and MAC address?2What is Wireless LAN? 4How does wireless networking work?6What is ESSID? 5What is BSSID?What is Fragment Threshold? 8What are the Open System and Shared Key authentications?9What is WEP? What is Beacon Interval? What is RTS Request To Send Threshold?What is WPA2? What is Preamble Type?What is Ssid Broadcast? What is Wi-Fi Protected Access WPA?What is Inter-Access Point Protocol IAPP? What is 802.1x Authentication?What is Temporal Key Integrity Protocol TKIP? What is Advanced Encryption Standard AES?What is NTP Client? What is Maximum Transmission Unit MTU Size?What is Clone MAC Address? What is DDNS?What is Wlan ACK TIMOUT? Example One PPPoE on the WAN Configure the LAN interface Configure the WAN interface192.168.2.10 Configure the Wlan interfaceExample Two Fixed IP on the WAN 192.168.2.254Configuration Example Two Fixed IP on the WAN Configure the WAN interface Configure the Wlan interface