X-Micro Tech XWL-11GRTX user manual Management Upgrade Firmware

Page 56

Screen snapshot – Management – Log

Item	Description
Enable Log	Click the checkbox to enable log.
System all	Show all log of wireless broadband router
Wirelessy	Only show wireless log
DoS	Only show Denial-of-Service log

Enable Remote Log Click the checkbox to enable remote log service.

Log Server IP	Input the remote log IP address
Address
Apply Changes	Click the Apply Changes button to save above
	settings.
Refresh	Click the refresh the log shown on the screen.
Clear	Clear log display screen

3.3.24 Management - Upgrade Firmware

This page allows you upgrade the Access Point firmware to new version. Please note, do not power off the device during the upload because it may crash the system.

47

Image 56

Contents Wlan 11g Broadband Router MAX. OUT Power Federal Communications Commission FCC Statement Copyright DisclaimerTable of Contents Frequently Asked Questions FAQ What is WMM? What is Wlan ACK TIMOUT? Terminology VPN 1Package contents 2Product SpecificationsProduct Features Generic RouterPanel Description Wlan LEDWAN 1Hardware Installation 2Software InstallationFor OS of Microsoft Windows 95/ 98/ Me For OS of Microsoft Windows 2000, XPConnect to the X-Micro Wlan 11g Broadband Router For OS of Microsoft Windows NTItemDescription Bssid Setup Wizard Operation ModeII Time Zone Setting III LAN Interface SetupIV WAN Interface Setup Wireless Basic SettingsVI Wireless Security Setup DescriptionWireless Basic Settings Wireless Advanced Settings MAC address. Client Mode onlySystem, Shared Key or Auto selection Wireless Security Setup Wlan IC of RealtekCharacters. WPA, PersonalPre-Shared Key OnlyWEP Key Setup Wireless Access Control Click the Disabled , Allow Listed or Deny ListedWDS Settings WDS Security Setup II WDS AP TableWEP64bits, WEP128bits, Wpatkip WPA2AES or NoneSite Survey LAN Interface Setup Click to open the Active Dhcp Client Table window WAN Interface SetupInformation. Server mode only Static IP II Dhcp Client Server III PPPoE There are Continuous , Connect on DemandIf you select the PPPoE and Connect on Demand IV Pptp Firewall Port Filtering Firewall IP Filtering Firewall MAC Filtering Firewall Port Forwarding Screen snapshot Firewall Port Forwarding Firewall URL Filtering Firewall DMZVPN Setting Enable DMZ Click to enable the DMZ functionScreen snapshot VPN Setup VPN Setup Edit Tunnel Mode only II Advanced IKE Setup Click to select DH1modp768 , DH2modp1024 orReceived Packets Management StatisticsSent Packets Management Time Zone Setting Management DdnsManagement Denial-of-Service Management Log Management Upgrade Firmware Management Save/ Reload Settings Management Password Setup Management WatchDogManagement Quality of Service Screen snapshot Management Qaulity of Service Logout Bandwidth Control TableRemoved from the Current Bandwidth Control Addresses Current Bandwidth Control Table1What and how to find my PC’s IP and MAC address? 2What is Wireless LAN?4How does wireless networking work? 3What are ISM bands?5What is BSSID? 6What is ESSID?What is Fragment Threshold? 8What are the Open System and Shared Key authentications?9What is WEP? What is RTS Request To Send Threshold? What is Beacon Interval?What is Preamble Type? What is Ssid Broadcast?What is Wi-Fi Protected Access WPA? What is WPA2?What is 802.1x Authentication? What is Temporal Key Integrity Protocol TKIP?What is Advanced Encryption Standard AES? What is Inter-Access Point Protocol IAPP?What is Maximum Transmission Unit MTU Size? What is Clone MAC Address?What is DDNS? What is NTP Client?What is Wlan ACK TIMOUT? Example One PPPoE on the WAN Configure the WAN interface Configure the LAN interfaceConfigure the Wlan interface Example Two Fixed IP on the WAN192.168.2.254 192.168.2.10Configuration Example Two Fixed IP on the WAN Configure the WAN interface Configure the Wlan interface