Z-Com ZMAX-8210-E, ZMAX-8210-I user manual Basic Settings, ZMAX-8210 Default Factory Settings

Chapter 3 Basic Settings

Default Factory Settings

We’ll elaborate the ZMAX-8210 default factory settings. You can re-acquire these parameters by resort button. If necessary, please refer to the “the way to restore default factory settings.

Table 1 ZMAX-8210 Default Factory Settings

Feature	Factory Default Settings
User Name	admin
Password	password
Device Name	Devicexxxxxx（xxxxxx represents the last 6 digits of
	MAC address）
Spanning Tree Protocol	Enable
	IP Type：STATIC
	IP Address：192.168.1.1
IP Settings
	Subnet Mask：255.255.255.0
	Default Gateway：0.0.0.0
	Primary/Second DNS Server：0.0.0.0
HTTP Redirect	Disable
	Base Station ID：01020304050D
	Dual-Direction Voice：TDD
Wireless Settings
	：
	Bandwidth 7MHz
	Encryption：Disable
	IR Bit: 0
SSH	Disable
	SNMP：Enable
SNMP	Trap Server：192.168.0.254
	Read Community：public
	Write Community：private

How to Login Your ZMAX-8210 via WEB Browser

ZMAX -8210 provides you with user-friendly web-based management. Take the following steps

Enter the ZMAX-8210 via IE. When entering the IP address: http://192.168.1.1, you’ll see a popup menu below:

Chapter 3 Basic Settings - 8 -