Z-Com ZMAX-8210-E, ZMAX-8210-I user manual Restore Factory Default Settings, Reboot

Page 30

The file name shall be mercury.cfg.

Restore Factory Default Settings

The ZMAX-8210 provides two ways to restore the default factory settings.

Restore the factory default settings via web:

From the “Restore Factory Default Settings”, clicking “ Restore ” will restore your

ZMAX-8210 default settings.

Restore the factory default settings via “Restore Button”.

When the ZMAX-8210 power adapter is connected to this device, press “Default Button”for

about over10seconds. The“Default Button”is shown as below:

Hardware

Default Button

Figure 24 ZMAX-8210 Default Button

Reboot

The ZMAX-8210 supports PoE supply. You can restore web-based management to reboot this CPE. Enabling “Yes” can reboot it.

Figure 25 Reboot

SSH

The ZMAX-8210 provides SSH management. It is recommended that Putty is your right option to access this device’s management.

Open by double clicking Putty

Enter 192.168.1.1 in the “Host Name” field and “Protocol”.

Chapter 5 Management

- 24 -

Image 30

Contents Page Copyright Bold Indicates the function, important words, and so onTroubleshooting ManagementPage ZMAX-8210 Page Introduction IntroductionAppearance Key Features Build Typical InfrastructureWireless Point-to-Point Outdoors Wireless Point-to-multipoint Outdoors Typical CaseHardware Installation Basic InstallationPackage Content System RequirementGround Antenna Installation How to Login Your ZMAX-8210 via WEB Browser Basic SettingsDefault Factory Settings ZMAX-8210 Default Factory SettingsSafety Alert Device Name ZMAX-8210 General InformationBridge and Router Mode IP AddressWireless Parameters ZMAX-8210 Wireless ParametersCreate a Link between the ZMAX-8210 and WiMAX Base Station Build the Infrastructure with WiMAX Base StationBasic Settings Advanced Configuration Router ModeWireless Router Mode Any IPDhcp Server Time ServerHttp Redirect Typical Http Redirect CaseHttp Redirect Management View the ZMAX-8210 Basic InformationView Statistics Information Password Upgrade FirmwareBackup and Retrieve ChapterRetrieve and Backup Settings Restore Factory Default Settings RebootPutty Settings SSH Settings Management Why my PC fails to access the internet? TroubleshootingFrequently Asked Question FAQ Why I fail to configure my ZMAX-8210？Refer to Restore Factory Default Settings How I could know my PC has connected to the ZMAX-8210?ZMAX-8210 Ping Appendix a Specifications ZMAX-8210-I SpecQAM 3/4 64QAM 3/4 Interface ZMAX-8210-E SpecModule ZMAX-8210-E Secure WEB Management Yes Interface Appendix B Technical Terms Technical TermsDevice and other devices Appendix C Ascii AsciiAppendix C Ascii Appendix D SSH Settings TrapServer Address Read Snmp Readcommunity Community Appendix D SSH Settings