Vox AD10VT, AD30VT, AD50VT, AD15VT manual Important Safety Instructions

Page 2

IMPORTANT SAFETY

INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Mains powered apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. (for U.S.A. and Canada)

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Turning off the power switch does not completely isolate this product from the power line so remove the plug from the socket if not using it for extended periods of time.

Install this product near the wall socket and keep the power plug easily accessible.

WARNING—This apparatus shall be connected to a mains socket outlet with a protective earthing connection.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Do not install this equipment on the far position from wall outlet and/ or convenience receptacle.

Do not install this equipment in a confined space such as a box for the conveyance or similar unit.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

THE FCC REGULATION WARNING (for U.S.A.)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician

for help.

Unauthorized changes or modification to this system can void the user’s authority to operate this equipment.

CE mark for European Harmonized Standards

CE mark which is attached to our company's products of AC mains operated apparatus until December 31, 1996 means it conforms to EMC Directive (89/336/EEC) and CE mark Directive (93/68/EEC).

And, CE mark which is attached after January 1, 1997 means it conforms to EMC Directive (89/336/EEC), CE mark Directive (93/68/EEC) and Low Voltage Directive (73/ 23/EEC).

Also, CE mark which is attached to our company's products of Battery operated apparatus means it conforms to EMC Directive (89/336/EEC) and CE mark Directive (93/68/EEC).

IMPORTANT NOTICE TO CONSUMERS

This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this product should be used. If you have purchased this product via the internet, through mail order, and/or via a telephone sale, you must verify that this product is intended to be used in the country in which you reside.

WARNING: Use of this product in any country other than that for which it is intended could be dangerous and could invalidate the manufacturer's or distributor's warranty.

Please also retain your receipt as proof of purchase otherwise your product may be disqualified from the manufacturer's or distributor's warranty.

Image 2
Contents Page Important Safety Instructions Table of Contents Page Welcome Aboard Main FeaturesIntroduction Valve Reactor Technology Signal PathPower AMP and the Glory Setup Quick StartCreating Your OWN Sounds Checking OUT the Preset ProgramsSwitching Between the Channels of a Program Input Section VolumeGuitarist’s Guided Panel Tour AMP SectionMaster Effect SectionTREBLE, MIDDLE, and Bass EffectsPRESET/MANUAL/CHANNEL Section Power Level Power SwitchAC power Write buttonSend jack LINE/PHONEExternal Speaker OUT jack Return jackAbout the three operating modes Preset Mode Selecting a Preset ProgramChannel Select Mode Selecting a Channel Program Getting to Manual Mode Manual ModeSwitching Channels Creating and storing your own program Creating Your OWN ProgramAdjusting the Noise Reduction When you’ve come up with a sound you like, store the programChecking the Settings of a Program Original Values Storing Your ProgramRestoring the Factory Settings Turn the power offTurning Effect Bypass ON/OFF Switch Using the VFS2 dual foot switchSwitching the Channel Program Switch Switching to Manual Mode SwitchControlling Factors Amp models and effectsAMP Models Turn IT UP Power AMP AccuracyTube Talk Boutique CL BlackAC15 UK ’70s US Higain UK ModernNumetal Boutique ODEDIT2 EffectsEDIT1 EDIT3Comp TAPFlanger Delay Troubleshooting Amp isn’t powering up when the Power switch is onYou can’t hear any effects Specifications Input/output jacksProgrammer’s Cheat Sheet Program Name EDIT2TAP+EDIT 1 /TAP