Vox AD50VT, AD30VT, AD10VT, AD15VT manual Specifications, Input/output jacks

Page 33

Specifications

Number of amp types:

11

Number of effects:

11

Noise reduction:

1

Number of programs:

11 preset, 2 channel

Input/output jacks

 

Top panel:

1 x INPUT

Rear panel:

1 x FOOT SW jack, 1 x LINE/PHONE jack

 

(AD50VT/AD100VT only) EXTERNAL SPEAKER OUT jack x 1

 

(AD100VT only) LOOP SEND jack x1, LOOP RETURN jack x 1

Power amp output

 

AD15VT:

maximum 15W RMS @ 8 ohms

AD30VT:

maximum 30W RMS @ 8 ohms

AD50VT:

maximum 50W RMS @ 8 ohms

AD100VT:

maximum 100W RMS @ 8 ohms

Speaker

 

AD15VT:

1 x VOX original (8 inch 8 ohm)

AD30VT:

1 x VOX original (10 inch 8 ohm)

AD50VT:

VOX original (12 inch, 8 ohm) made by Celestion Corporation x 1

AD100VT:

VOX original (12 inch, 16 ohm) x 2

Signal processing

 

A/D conversion:

24-bit

D/A conversion:

24-bit

Sampling frequency: 44.1 kHz

Power supply requirements:

AC, local voltage

Power consumption

AD15VT: 23W

 

AD30VT: 45W

 

AD50VT: 52W

 

AD100VT: 100W

Dimensions (W x D x H):

AD15VT: 428 x 224 x 395 (mm)/16.85" x 8.82" x 15.55" (inches)

 

AD30VT: 456 x 224 x 430 (mm)/17.95" x 8.82" x 16.93" (inches)

 

AD50VT: 578 x 265 x 485 (mm)/22.76" x 10.43" x 19.95" (inches)

 

AD100VT: 684 x 268 x 553 (mm)/26.93" x 10.55" x 21.77" (inches)

Weight

AD15VT: 10 kg/22.05 lbs.

 

AD30VT: 12 kg/26.46 lbs.

 

AD50VT: 20 kg/44.09 lbs.

 

AD100VT: 29 kg/63.93 lbs.

Included items:

power cable

Options (sold separately):

VFS2 dual foot switch

*Appearance and specifications of this product are subject to change with- out notice.

URL = http://www.voxamps.co.uk

29

Image 33
Contents Page Important Safety Instructions Table of Contents Page Main Features IntroductionWelcome Aboard Signal Path Power AMP and the GloryValve Reactor Technology Quick Start SetupChecking OUT the Preset Programs Switching Between the Channels of a ProgramCreating Your OWN Sounds Guitarist’s Guided Panel Tour VolumeInput Section AMP SectionTREBLE, MIDDLE, and Bass Effect SectionMaster EffectsPRESET/MANUAL/CHANNEL Section AC power Power SwitchPower Level Write buttonExternal Speaker OUT jack LINE/PHONESend jack Return jackPreset Mode Selecting a Preset Program Channel Select Mode Selecting a Channel ProgramAbout the three operating modes Manual Mode Switching ChannelsGetting to Manual Mode Creating Your OWN Program Creating and storing your own programWhen you’ve come up with a sound you like, store the program Adjusting the Noise ReductionStoring Your Program Checking the Settings of a Program Original ValuesTurn the power off Restoring the Factory SettingsSwitching the Channel Program Switch Using the VFS2 dual foot switchTurning Effect Bypass ON/OFF Switch Switching to Manual Mode SwitchAmp models and effects AMP ModelsControlling Factors Power AMP Accuracy Tube TalkTurn IT UP Black Boutique CLAC15 UK ’70s Numetal UK ModernUS Higain Boutique ODEDIT1 EffectsEDIT2 EDIT3TAP CompFlanger Delay Amp isn’t powering up when the Power switch is on TroubleshootingYou can’t hear any effects Input/output jacks SpecificationsProgrammer’s Cheat Sheet Program Name EDIT2TAP+EDIT 1 /TAP