Vox AD30VT, AD50VT, AD10VT, AD15VT manual Power Switch, Write button, AC power, Foot SW, Power Level

Page 12

WRITE button

Use this button to save a new program into CH1 or CH2. Refer to “Storing your program” (page 14).

5.POWER SWITCH

When the power is on, the indicator located above the switch will be lit.

B. Rear Panel

AD15VT/AD30VT/AD50VT

AD30VT/AD50VT only

AD50VT only

AD100VT

AC power

This is where you connect the included power cord.

FOOT SW

You can connect the optional VFS2 dual foot switch (sold separately*) here, and use it to switch programs or bypass the effect while you perform.

POWER LEVEL

This adjusts the output wattage of the power amp.

AD30VT: less than 0.1 W – 30 W AD50VT: less than 0.15 W – 50 W

AD100VT: less than 0.15 W – 100 W

NOTE: The AD15VT doesn’t have this control.

NOTE: The power level setting isn’t saved as part of the program.

8

Image 12

Contents Page Important Safety Instructions Table of Contents Page Main Features IntroductionWelcome Aboard Signal Path Power AMP and the GloryValve Reactor Technology Setup Quick StartChecking OUT the Preset Programs Switching Between the Channels of a ProgramCreating Your OWN Sounds Volume Guitarist’s Guided Panel TourInput Section AMP SectionEffect Section TREBLE, MIDDLE, and BassMaster EffectsPRESET/MANUAL/CHANNEL Section Power Switch AC powerPower Level Write buttonLINE/PHONE External Speaker OUT jackSend jack Return jackPreset Mode Selecting a Preset Program Channel Select Mode Selecting a Channel ProgramAbout the three operating modes Manual Mode Switching ChannelsGetting to Manual Mode Creating and storing your own program Creating Your OWN ProgramAdjusting the Noise Reduction When you’ve come up with a sound you like, store the programChecking the Settings of a Program Original Values Storing Your ProgramRestoring the Factory Settings Turn the power offUsing the VFS2 dual foot switch Switching the Channel Program SwitchTurning Effect Bypass ON/OFF Switch Switching to Manual Mode SwitchAmp models and effects AMP ModelsControlling Factors Power AMP Accuracy Tube TalkTurn IT UP Boutique CL BlackAC15 UK ’70s UK Modern NumetalUS Higain Boutique ODEffects EDIT1EDIT2 EDIT3Comp TAPFlanger Delay Troubleshooting Amp isn’t powering up when the Power switch is onYou can’t hear any effects Speciﬁcations Input/output jacksProgrammer’s Cheat Sheet Program Name EDIT2TAP+EDIT 1 /TAP