Vox AD15VT, AD30VT, AD50VT, AD10VT manual Restoring the Factory Settings, Turn the power off

Page 19

RESTORING THE FACTORY SETTINGS

Here’s how you can restore the factory settings.

NOTE: If you do this, the programs you saved in the channels will be completely erased, and will be reset to the factory settings.

NOTE: Effect and noise reduction settings made in the Manual mode will also be erased.

1.Turn the power off.

2.While holding down both the CH and WRITE buttons, turn the power on. When the CH1 and CH2 LEDs begin blinking, release these two buttons.

HINT: If you decide to abort this operation, press the TAP switch at this point.

3.When you press the WRITE switch, the CH1 and CH2 LEDs will change from blinking to lit. Initialization will be completed in a few seconds, and the amp will switch to Preset mode.

NOTE: Never turn off the power while initialization is taking place.

15

Image 19
Contents Page Important Safety Instructions Table of Contents Page Introduction Main FeaturesWelcome Aboard Power AMP and the Glory Signal PathValve Reactor Technology Quick Start SetupSwitching Between the Channels of a Program Checking OUT the Preset ProgramsCreating Your OWN Sounds AMP Section VolumeGuitarist’s Guided Panel Tour Input SectionEffects Effect SectionTREBLE, MIDDLE, and Bass MasterPRESET/MANUAL/CHANNEL Section Write button Power SwitchAC power Power LevelReturn jack LINE/PHONEExternal Speaker OUT jack Send jackChannel Select Mode Selecting a Channel Program Preset Mode Selecting a Preset ProgramAbout the three operating modes Switching Channels Manual ModeGetting to Manual Mode Creating Your OWN Program Creating and storing your own programWhen you’ve come up with a sound you like, store the program Adjusting the Noise ReductionStoring Your Program Checking the Settings of a Program Original ValuesTurn the power off Restoring the Factory SettingsSwitching to Manual Mode Switch Using the VFS2 dual foot switchSwitching the Channel Program Switch Turning Effect Bypass ON/OFF SwitchAMP Models Amp models and effectsControlling Factors Tube Talk Power AMP AccuracyTurn IT UP Black Boutique CLAC15 UK ’70s Boutique OD UK ModernNumetal US HigainEDIT3 EffectsEDIT1 EDIT2TAP CompFlanger Delay Amp isn’t powering up when the Power switch is on TroubleshootingYou can’t hear any effects Input/output jacks SpecificationsProgrammer’s Cheat Sheet Program Name EDIT2TAP+EDIT 1 /TAP