How to install

INSTALLATIONS

Installing in a container box (Only for the Encoder)

The encoder can be installed in a container box.

When required to install the encoder in a container box, install as below.

1.Place the supplied simple mounting brackets with the supplied fixing screws on the bottom of the encoder.

Fixing screw for the simple mounting bracket (M3x6: supplied)

Simple mounting bracket for the container box (supplied)

2.Fix the encoder in the container box by fixing the attached simple mounting brackets to the box with fixing screws. (Procure fixing screws locally to fix the encoder in the container box according to the material of the box.)

Procure fixing screws locally according to the material of the box.

Warning when installing the encoder in a container box

To reduce the risk of fire or malfunction, observe the following instructions.

1.Ensure the following when installing the encoder in the box.

•Do not block the ventilation openings at the rear, on the bottom of the encoder with cables or clothes etc.

•Keep more than 10 cm distance between the rear panel of the encoder and the internal side surface of the box.

•Keep more than 1 cm between the bottom of the encoder and the internal bottom surface of the box.

2.Keep the temperature inside the box between –5 °C and +45 °C (23 °F and 113 °F) and the humidity less than 90% while the encoder is in operation. (Recommended temperature is less than 40 °C (104 °F).

If temperature and humidity are beyond the value above, it may affect parts inside of the encoder and cause malfunction.

In case of installing the container box outdoor, consider influences on temperature and humidity from seasonal change, sunlight and weather.

According to needs, fabricate sun shields, cooling devices, heating devices, drain holes, etc.

3.Do not install the box in places where discharging of corrosive liquids and gases occurs such as locations close to seawater, hot springs, exhaust gas, etc.

This may cause corrosion of internal parts inside of the encoder.

4.In case of installing the box in place exposed to rain, use the waterproof box equivalent to the IP45 or better. Waterproof also around the cable hole and the cables as sufficiently as possible.

5.Depending on the material of the box, it may cause noise as the result of the vibration of the cooling fan of the encoder with the box.

6.Make enough space around the rear panel and fix the cables firmly but so as not to bend the cables or place too much force on the connectors.

7.Do not install the box in places such as in a car which is subject to having strong vibrations

WJ-GXD900, WJ-GXE900 specifications

The Panasonic WJ-GXE900 and WJ-GXD900 are top-tier video encoders designed to meet the increasing demands of surveillance applications. These devices are essential in providing high-quality video transmission over IP networks, making them ideal for both security and monitoring purposes.

One of the standout features of the WJ-GXE900 is its advanced encoding capability. It supports H.265 and H.264 compression standards, allowing for efficient bandwidth usage without compromising video quality. This technology is particularly beneficial for environments where bandwidth might be limited, as it significantly reduces the data load while maintaining impressive clarity, even in challenging lighting conditions.

The WJ-GXD900, on the other hand, is designed for high-definition video encoding. It also utilizes H.265 and H.264 technologies, but offers enhanced image processing capabilities. This includes advanced noise reduction, which helps to produce clearer images during low-light situations. Both models utilize 4K resolution support, allowing users to capture ultra-high-definition video, which is crucial for applications requiring detailed surveillance footage.

Another key characteristic of both models is their versatility in integration with IP cameras and other devices. They are compatible with a wide range of Panasonic and third-party IP cameras, ensuring that users can build a surveillance system tailored to their specific needs. This interoperability is vital for large installations where multiple camera types might be used.

The WJ-GXE900 and WJ-GXD900 also feature intuitive web-based interfaces, simplifying the setup and configuration processes. Users can easily manage settings, stream video, and monitor performance remotely from any device with internet access. This remote management capability is increasingly important in today's fast-paced environments, where quick responses and monitoring are critical.

Additionally, both models support multiple streaming options, including the ability to deliver video to various destinations simultaneously. This feature is particularly useful for organizations needing to distribute video feeds to multiple monitors or devices, enhancing real-time surveillance capabilities.

In conclusion, the Panasonic WJ-GXE900 and WJ-GXD900 are powerful video encoders that combine advanced technology with user-friendly features. Their support for high-quality video encoding, integration flexibility, and remote management capabilities make them excellent choices for any modern surveillance system. These devices exemplify Panasonic's commitment to innovation, reliability, and high-performance solutions in the realm of security technology.