Precautions

●Refer all work related to the installation of these products to qualified service per- sonnel or system installers.

●Do not operate the appliances beyond their specified temperature, humidity, or power source ratings.

Use the appliance at temperatures within –10 °C - + 50 °C (14 °F - 122 °F) and humidity below 90 %. The input power source for this appliance is 120 V AC 60 Hz.

●Handle the appliance with care.

Do not strike or shake, as this may damage the appliance.

●Do not strike or give a strong shock to the unit.

It may cause damage or allow water to enter the unit.

●Built-in backup battery

Before the first use, charge the built-in backup battery by turning on the power for 48 hours or more. If it is not charged enough, in the case where the power goes down, the internal clock may keep bad time or the operative condition may be different to that before the electric power failure.

The built-in battery life is approximately 5 years. Ask the shop where you purchased the unit when replacement of the battery is required.

●Cooling Fan

The cooling fan is perishable. It will need to be replaced it after around 30 000 hours of operation. Replacement costs of the cooling fan are not covered by the warranty even if it needs to be done within the warranty period. Consult your dealer for servicing.

●Cleaning

Turn the power off when cleaning the unit. Otherwise it may cause injuries.

●Do not use strong or abrasive detergents when cleaning the appliance body.

Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild detergent and wipe gently.

●Network with surge protector

Connect the encoder and the decoder to a network with front-end protection circuitry (equivalent to ITU-T recommendation, series K) against electrical surges and lightning strikes. The encoder and the decoder may be damaged if connected to a network without front-end protection circuitry against electrical surges and lightning.

●Grounding

Connect the wire from the SIGNAL GND terminal to earth ground.

Otherwise, it may cause oscillation or may damage the encoder and the decoder.

●Indication label

Refer to the indication label placed on the bottom of the product as to the indications of equipment classification and power source, etc.

●Avoid placing receptacles that contain liq- uids such as water near the appliance.

If liquid falls over the product, it may cause fire or electric shock.

●We recommend that you make a note of your settings and save them. This will help you when required to change the system configuration, or when unexpected trouble or failure occurs.

WJ-GXD900, WJ-GXE900 specifications

The Panasonic WJ-GXE900 and WJ-GXD900 are top-tier video encoders designed to meet the increasing demands of surveillance applications. These devices are essential in providing high-quality video transmission over IP networks, making them ideal for both security and monitoring purposes.

One of the standout features of the WJ-GXE900 is its advanced encoding capability. It supports H.265 and H.264 compression standards, allowing for efficient bandwidth usage without compromising video quality. This technology is particularly beneficial for environments where bandwidth might be limited, as it significantly reduces the data load while maintaining impressive clarity, even in challenging lighting conditions.

The WJ-GXD900, on the other hand, is designed for high-definition video encoding. It also utilizes H.265 and H.264 technologies, but offers enhanced image processing capabilities. This includes advanced noise reduction, which helps to produce clearer images during low-light situations. Both models utilize 4K resolution support, allowing users to capture ultra-high-definition video, which is crucial for applications requiring detailed surveillance footage.

Another key characteristic of both models is their versatility in integration with IP cameras and other devices. They are compatible with a wide range of Panasonic and third-party IP cameras, ensuring that users can build a surveillance system tailored to their specific needs. This interoperability is vital for large installations where multiple camera types might be used.

The WJ-GXE900 and WJ-GXD900 also feature intuitive web-based interfaces, simplifying the setup and configuration processes. Users can easily manage settings, stream video, and monitor performance remotely from any device with internet access. This remote management capability is increasingly important in today's fast-paced environments, where quick responses and monitoring are critical.

Additionally, both models support multiple streaming options, including the ability to deliver video to various destinations simultaneously. This feature is particularly useful for organizations needing to distribute video feeds to multiple monitors or devices, enhancing real-time surveillance capabilities.

In conclusion, the Panasonic WJ-GXE900 and WJ-GXD900 are powerful video encoders that combine advanced technology with user-friendly features. Their support for high-quality video encoding, integration flexibility, and remote management capabilities make them excellent choices for any modern surveillance system. These devices exemplify Panasonic's commitment to innovation, reliability, and high-performance solutions in the realm of security technology.