SETTINGS MENUS OF THE DECODER
To receive the motion pictures sent from the encoder, do the following.
Refer to a network administrator about the required network addresses (IP addresses, etc.).
1.Enter the IP address of the decoder in the address box of the web browser and press the Enter key. For example, enter the default IP address of the decoder "192.168.0.11" in the address box of the web browser.
http://192.168.0.11/
The top page will be displayed.
The top page of the decoder
2.Click a desired button in the left column on the top page.
The authentication dialog window will be displayed.
Enter a user name whose access level is 1 (ADMINISTRATOR) and a password, and click the [OK] button.
If the entered user name and password are registered, the settings page will be displayed.
When no user is registered yet, enter the default user name (admin) and password (blank: enter nothing). (To register users, go to the USER page.)
When authenticated, the top page will be displayed again.
When authenticated once, the authentication dialog window will not be displayed by clicking the buttons in the left column until the web browser window is closed.
The items on the next page can be checked or changed on each settings page.
Click the [SET] button after changing the settings.
66