Panasonic CF-74GCDADBM service manual Arranging the LCD/TS Cable, Attaching the Cloth

Arranging the LCD/TS Cable

1.Connect the LCD/TS Cable (LCD) to the Connector on the LCD Unit.

2.Connect the LCD/TS Cable (TS) to the Connector (CN603) on the TS PCB.

B: Attaching the Cloth

Cushion	Cloth
	3~5mm
	Attach the Cloth along
	the surface of
	the Cushion.
Match the end of
the Cloth to the end
of the Cushion.

Fold it back and attach to the side surface.

	Ensure the Cloth is surely				Cloth
	attached to the metal
	chassises on both of the
	side and top.
	(The Cloth should catch
	the metal chassieses only.
	It must not catch the TAB.)
Cushion			Cloth
A
		A	Attach the Cloth
			along	the surface
			of the	Cushion.

Cloth

Cloth

B Match the end of the Tape to the end of the EMI Sheet. B

LCD Unit

TS PCB

S1

Safety Working

Turn them halfway. *Avoid too much tension on the Cables.

Tape

Cover the

Connector

Terminals using the Tape.

LCD/TS Cable EMI Sheet

Before attaching the EMI Sheet, attach the Tape.

Cloth	Ensure it does not come out
	of the metal part.

	Use the Cable covered
	with the Conductive Cloth only.
	Cloth
95~100mm	0~2mm

Corner of the Cloth

Ensure the corner of the Cloth

does not come out of the LCD's edge.

Safety Working S1

A: Match the Cloth by Cushion edge 0~1mm

9-10