Panasonic CF-74GCDADBM service manual Setting the LCD Front Cabinet, Setting the Display unit

Page 35

9.2.4.Setting the LCD Front Cabinet

1.Set the LCD Front Cabinet to the LCD Rear Cabinet.

2.Fix the LCD Front Cabinet using the two Screws<N15>.

3.Fix the LCD Front Cabinet using the two Screws<N16>, and attach the two LCD Leg Rubbers.

Screws <N15>: DRHM0075ZA

Screws <N16>: DXQT2+G4FCL

Fixing of the LCD Front Cabinet

Ensure all the 23 Hooks are securely set in.

LCD Leg Rubber

<N16>

: Hooks

<N15>

LCD Front

Cabinet

<N15> LCD Unit

9.2.5.Setting the Display unit

1.Attach the Gasket.

2.Set the Hinge Screw Cover L and R to the Hinge L and R.

3.Pass the Cables coming out of the LCD Unit into the com- puter.

4.Fix the Display Unit using the two Screws<N6> from the computer upper side.

5.Fix the Display Unit using the four Screws<N6> from the computer bottom side.

Screws. <N6>: DXSB3+6FNL

<N6>

Display Unit

Hinge

Screw<N6>

Cover L

Gasket

<N6>	Hinge
	Screw
	Cover R
	<N6>

9-13

Image 35

Contents Model No. CF-74GCDADBM Page Laser Safety Information Page Page Contents Specifications Wireless LAN Only for model with wireless LAN Data transfer rate of DVD per 1X speed is 1,350 KB/s Names and Functions of Parts Right side Block Diagram Page Troubleshooting Power-On Self Test Boot Check Stuck key 02D0 System cache error Cache disabled Self Diagnosis Test Operation of PC-Diagnostic Utility Selection of tested device To skip Bios password Wiring Connection Diagram HDD Unit Battery PackPreparation Removing the HDDRemoving the Dimm Memory Card Removing the Bottom Case Removing the Handle AssyRemoving the Main PCB Removing the Wireless Module and MDC ModuleRemoving the PC Card Ejector Lithium Battery PCB Removing the LCD and the Inverter Removing the USB PCBRemoving the Display unit Removing the LCD Front CabinetPreparation Removing the Touch PAD and PAD PCBRemoving the Finger PCB Reassembly Instructions Attaching the LCD Damper C and LCD Damper D Arranging the W-LAN L and R CableAttaching the Cloth Arranging the LCD/TS CableSetting the Inverter and Arranging the Inverter Cable Arranging the TP Power Cable and Attaching the TP/LCD SheetLCD Unit Fixing of the LCD Front Cabinet Setting the LCD Front CabinetSetting the Display unit Arranging the USB Cable Setting the USB PCBSetting the SD PCB, Heat Sink FAN Motor Setting the BT PCBApplying Grease on the Heat Sink Arranging the DC-IN Cable Setting the DC-IN PCB and I/O PCBArranging the Lithium Battery Setting the PC Card Ejector and Lithium BatteryArranging the FAN Cable Arranging the Modem Cable Setting the Wireless Module and MDC ModuleSetting the Handle Assy Setting the Bottom CaseSoldering the Speaker Cable and Setting the Speaker Rubber Setting the Speaker and the LED PCBComputer, and set the Keyboard to the computer Setting the KeyboardSetting the HDD Setting the Dimm Memory Card and Dimm CoverLatch HDD Unit Battery Pack DVD-ROM Drive Unit Exploded View Screw tightening torque Screw tightening torque CF-74GCDADBM Replacement Parts List Accessories DFHR6214ZB Sleeve B DFBH3045YB Hinge L Description EEFCX0G151R Thermistor Serial Eeprom B1GBCFNN0042 Transistor DEARA8AJ104M Resistor Array ERJ2RKF1502X RESISTOR, 1/16W, 15KΩ DC-IN PCB SD PCB