Outlaw Audio 1070 owner manual Connecting Video Components, DVD Player, Video Recorder

Page 17

Connecting Video Components

Before making connections to any video devices, you should understand how the Model 1070 routes video signals.

nAny signal appearing at any composite video input (DVD, VIDEO 1-4 IN) is automatically sent to the composite and S-Video VIDEO MONITOR OUT and VIDEO 1 REC OUT jacks and to the component MONITOR OUT jacks.

nAny signal appearing at any S-Video input jack (DVD, VIDEO 1-4 IN) is auto- matically sent to the composite and S-Video VIDEO MONITOR OUT and VIDEO 1 REC OUT jacks and to the component MONITOR OUT jacks.

nAny signal appearing at the component video (DVD, VIDEO 1-2 IN) input jacks is automatically sent to the component video MONITOR OUT jacks only.

nAny signal appearing at either the DVI 1 or DVI 2 input is sent to the DVI OUT jack only.

NOTE: For the greatest flexibility, connect composite or S-Video cables from all of your video source components to the Model 1070, even if you are already using a component video or DVI connection.

Remember that the Model 1070's on-screen display does not appear at the DVI OUT jack so always provide a component, S-Video, or composite video con- nection in addition to DVI.

DVD Player

This is a complex bit of interconnectivity simply because there are many pos- sibilities. You’ll have to deal with several video signal formats and a variety of audio possibilities, too. So read this section carefully before you begin.

Video Connections

Composite Using a video cable with yellow RCA jacks at both ends, connect the DVD player’s composite video output to the composite video DVD input (RP5).

Note: You may be tempted to use standard audio “patch cords” for composite video connections. Resist that temptation. The impedance specification of audio cables is not the same as for video and you may see image degradation as a result.

S-VideoUsing a S-video cable with a 4-pin mini-DIN connector at each end, connect the DVD player’s S-video output to the S-video DVD input (RP5).

S-Video delivers a better picture than composite connections and should be used whenever possible unless component or DVI connections are available. They deliver better pictures than S-Video.

Component If your DVD player has component video outputs, connect them to the component DVD IN jacks (RP1). Because component video connections require three video-grade cables, remember to follow the alphabet (“Y” to “Y,” “PB” to “PB,” and “PR” to “PR”) when making these connections.

DVI/HDMI If your DVD player has a DVI or HDMI video output and your video monitor has a DVI or HDMI input, connect the DVD player to the Model 1070’s DVI 1 or 2 input (RP23). (For HDMI-equipped DVD players, use an HDMI-to-DVI adapter, or dual-purpose cable such as those available from Outlaw Audio.)

Owner’s Manual

Connecting Your Model 1070

Audio Connections

Analog Using a pair of RCA-to-RCA audio cables, connect your DVD player’s L and R channel analog audio outputs to the DVD analog audio jacks (RP5).

Digital Connect your DVD player’s digital audio output (coaxial or optical) to one of the digital inputs (RP12). Note the selected input on your worksheet for configuration later.

Multi-Channel Audio If your DVD player has a multi-channel audio output for DVD-Audio or SACD playback, connect the six outputs from your player to the multi-channel AUDIO IN jack set (RP5). Use the L, R, CEN, SUB, SL, and SR jacks only – ignore the jacks labeled SBL and SBR. (These will accommodate future 7.1-channel formats if they appear.) Be careful to maintain continuity: Connect L to L, center to CEN, and so on. If your DVD player includes a built-in Dolby Digital decoder with 5.1-channel analog audio outputs but no DVD-A or SACD capability, do not use the player’s 5.1 channel analog outputs. Instead, use a digital connection as described above. Your ears will applaud your choice.

NOTE: You must use the multi-channel audio input for SACD and DVD-Audio players in order to hear the high-resolution digital sound these players provide.

Video Recorder

You can connect a video recording device (VCR, PVR, DVD recorder, etc.) by using the following methods.

Video Connections

Composite Connect your video recorder’s composite video output to the VIDEO 1 IN composite video input jack (RP18). Then connect the recorder’s composite video input to the VIDEO 1 REC OUT composite video jack (RP18). Use the same type of cable specified in the DVD Player section immediately above.

S-VideoUsing a S-video cable with a small 4-pin mini-DIN connector at each end, connect the DVD player’s S-video output to the S-video Video 1 input (RP18). Then connect the recorder’s S-video input to the S-video Video 1 output (RP18).

Audio Connections

Digital Connect your video recorder’s digital audio output (coaxial or optical) to one of the digital inputs (RP12). Note the selected input on your worksheet for configuration later.

If your recording device has a digital input, connect it to either the coaxial or optical (RP14) output jack. The signal from a selected digital source will be sent to the recorder.

Digital TV Tuner/Cable Box/Satellite Receiver

Video Connections

Composite Using a video cable with yellow RCA jacks at both ends, connect the device’s composite video output to your choice of the Video 1-3 composite video inputs. (RP18 or RP19).

S-VideoUsing an S-video cable, connect the device’s S-video output to your choice of the Video 1-3 S-video inputs. (RP18 or RP19).

Model 1070 7.1 Channel Surround Sound Receiver

17

Image 17
Contents Model Please Read First When the power-supply cord or plug is damagedHandle the AC Power Cord Gently Power CordWiring Installation LocationTable of Contents Brief Note On This Manual Outlaw Audio Model Channel Surround Sound ReceiverActivates or cancels the on-screen menu AccessoriesUnpacking Model 1070 Front PanelModel 1070 Front Panel Adjusts the volume level of the headphonesSelects between AM or FM Selects between FM mono and FM stereoModel 1070 Rear Panel RP22 Preamp audio outputs see pages RP25 Main Power button see pages 26Model 1070 Rear Panel Model 1070 Remote Control Remote ControlThese buttons control the Model 1070’s volume Other components begins the play functionOther components temporarily stops Play or Record Other components activates the recording functionAvailable Surround Modes Surround FormatsModel 1070 Front Panel and On Screen Display Dolby PLIIx-CDolby Pro Logic Dolby DigitalDolby Digital EX Stereo Listening Modes For analog connections, remember that Connecting Your ModelConnecting Audio Components CD Player Connecting Audio Equipment to the ModelDVD Player Connecting Video ComponentsVideo Recorder Digital TV Tuner/Cable Box/Satellite ReceiverDVD-Audio/SACD/DVD Player Connecting a DVD Player to the ModelAudio Connection Note Connecting Other Video Components to the ModelGauge Antenna ConnectionsLoudspeaker Connections If the video display has an Hdmi input Connecting a Video Display to the ModelConnecting Loudspeakers to the Model PoweredSubwoofer Connection AC power connectionSupplemental Amplifier Connections Other ConnectionsWhen using a passive Connecting an External Amplifier to the ModelAudio Connection Record ChartVideo Input Configuration System SetupExit Takes you out of Menu mode Here’s a brief explanation of each item on the Main menuInput choices appear as follows as you scroll through them Input Configuration sub-menu appearsDVD Configuration sub-menu will appear Up to 200ms of delay can be selected in 10ms increments Speaker PlacementConfiguring Audio Inputs There is no Lip Sync Delay available for audio-only sourcesLeft Front, Center, and Right Front Speakers Speaker PlacementLeft and Right Surround Speakers Surround Back Left and Right SpeakersTo enter settings for speaker size Speaker Size ConfigurationSubwoofers Speaker Size sub-menu appearsSelect LB/RB when you have two Surround Back speakers Speaker X-Over Crossover ConfigurationTo enter settings for speaker crossover Speaker X-Over sub-menu appearsSurround Configuration sub-menu appears Surround Setting ConfigurationsNight Mode PanoramaHP Headphone Mode DimensionChannel Calibration Channel Subwoofer OffsetChannel Calibration with the Model 1070 Test Tone Channel Calibration sub-menu appearsAs you desire Manual Channel Calibration with Your Own Test SourceTo set the Delay for each channel Delay AdjustDelay Settings for Large Rooms Available choices are System Configuration SettingsYou can adjust the level from -70 to +10dB Standby/On indicator on the front panel will glow amber PowerModel 1070 Operation Direct OperationName of the selected source will reappear in the displays Use this control to adjust the volume levelVolume of the selected source will return at the new level No Comp means no compression i.e., Night Mode Off Night Mode SelectionSleep Timer Channel TrimLip-Synch Delay Using the AM/FM TunerAdjusting Tone Controls Stereo will tune stereo signalsCreating an AM or FM station-memory preset manually Using HeadphonesTo create FM station-memory presets automatically To select a preset stationBattery Installation Remote Control Setup and OperationSetup Using Preprogrammed Codes To install batteries in the remote controlYou can choose CBL, AUX, VCR, TV, SAT, CD, or AMP Volume Control Punch-ThroughLED will blink twice Operation Setup CodesSource Selection Buttons BacklightingDVD Players Televisions TV/VCR Combos VCRs System Reset Care and MaintenanceCleaning When You Are AwayTroubIeshooting Symptom Possible Cause Solution OptionsModel 1070 Specifications T l a w a u d i o Outlaw Audio Limited Warranty

1070 specifications

Outlaw Audio has made a name for itself in the high-performance audio market, and their Model 1070 receiver is a prime example of their commitment to delivering exceptional sound quality. The Outlaw Audio 1070 is a versatile surround sound receiver that combines advanced technology with user-friendly features, designed to elevate your home theater experience.

One of the standout features of the 1070 is its powerful amplification system. It delivers 7 channels of amplification, each capable of producing 60 watts per channel into 8 ohms. This robust power output ensures that even the most demanding audio tracks are handled with ease, providing clarity and depth across the frequency spectrum. The receiver is also equipped with an array of connection options, including HDMI inputs, to accommodate all of your audio and video sources seamlessly.

The 1070 employs advanced digital processing technologies that enhance your listening experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing you to enjoy multidimensional audio for movies, music, and gaming. Outlaw Audio has integrated their proprietary Outlaw Bass Management system, which offers customizable bass settings to suit your room’s acoustics and your personal preferences. This feature ensures that your subwoofer delivers a seamless integration with your main speakers, enhancing the overall impact of your audio.

For those who appreciate fine-tuning their listening experience, the Outlaw 1070 includes an easy-to-use graphical user interface that simplifies setup and adjustment. The on-screen menus provide straightforward access to configuration settings, making it simple to calibrate your system for optimal performance.

Another key characteristic of the Outlaw 1070 is its build quality. The receiver is housed in a sturdy chassis, designed to minimize interference and reduce vibrations, a consideration that makes a difference in sound quality. The high-quality components and construction reflect Outlaw Audio’s dedication to crafting products that meet the expectations of audiophiles.

In conclusion, the Outlaw Audio 1070 offers a remarkable combination of power, flexibility, and advanced technologies that cater to both casual listeners and serious audiophiles alike. With its impressive amp capabilities, robust surround sound processing, and user-friendly design, the 1070 stands as a compelling choice for anyone looking to enhance their home audio system. Whether you’re enjoying a movie night or listening to your favorite music, the Outlaw Audio 1070 is engineered to deliver an immersive sound experience.