Outlaw Audio 1070 owner manual Volume Control Punch-Through, LED will blink twice

Page 43

Remote Control Setup and Operation

Programming TV/VCR Control

The Model 1070 can control TV/VCR combo units, but the procedure is some- what different than entering codes to control other components. As with other components, you must enter a four-digit code. Codes for many TV/VCR brands are provided in the following pages. More than one setup code number may work with your device. You should test the functions for each of the code numbers that work with your device to determine the best one for your particular unit.

If you want to control TV functions besides power on/off, you may need to enter a separate TV code, as described below.

To program TV/VCR control:

1.Turn on the TV/VCR, either manually or with its original remote control, and insert a video cassette.

2.Find the four-digit code for your TV/VCR from the tables on pages 44 to 49. Your TV/VCR may have a separate TV code listed. If so, be sure to note both codes.

3.On the Model 1070 remote, press VCR.

4.Press and hold SETUP until the red LED blinks twice, then release SETUP.

5.Enter the first four-digit code for your component.

If the code entry is performed correctly, the LED will blink twice. If it does not, then repeat steps 3, 4, and 5, using the same four-digit code.

6.Aim the remote at the TV/VCR and press PWR once. The TV/VCR should turn off. If it does not respond, repeat steps 3, 4, and 5, trying each code for your brand until you find one that works. If it still does not work, try searching for the code (see Searching For Your Code).

7.If your component has a separate TV code listed, press TV on the Model 1070 remote control.

The LED will blink twice.

8.Enter the four-digit TV code for your TV/VCR combo.

If the code is entered correctly, the LED will blink twice. If it does not, then repeat steps 7 and 8 using the same four-digit code.

Searching for Your Code

If your device does not respond to the remote after you have tried all codes listed for your brand, or if your brand is not listed at all, try searching for your code.

To search for a code for your component:

1.Press the Device Control Selector button on the Model 1070 remote that corresponds to the device you want to control.

You can choose CBL, AUX, VCR, TV, SAT, CD, or AMP.

2.Press and hold SETUP until the red LED on the remote blinks twice, then release SETUP.

3.Enter 991.

The LED will blink twice.

4.Aim the remote control at the component and slowly alternate between pressing PWR and the button for the device you pushed in step 1.

5.Stop when the TV turns off.

6.Press SETUP once.

7.To search for the codes of your other components, repeat the process, using the appropriate button for the new device in steps 1 and 4.

Owner’s Manual

Checking the Codes

If you have set up the Model 1070 remote by searching for the codes, for future reference, you may wish to find out which four-digit code is operating your equipment.

To find the four-digit code for a device:

1.On the Model 1070 remote, press the button near the top of the remote for the type of device you want to control.

2.Press and hold SETUP until the red LED on the remote blinks twice, then release SETUP.

3.Enter 990.

The LED will blink twice.

4.To view the code for the first digit, press 1.

After three seconds, the LED will blink to indicate the first code number (i.e., 3 blinks = 3). Count the blinks and write down the number.

5.Repeat steps 1-4 for each of the other three digits.

Press 2 for the second digit, 3 for the third, and 4 for the fourth. Count the blinks and write down the numbers.

6.To check for the codes of your other components, repeat steps 1 through 5, but substitute the appropriate key in step 1 for the new component you are checking.

Re-Assigning Device Buttons

If you wish to control a second device of a type already programmed into the Model 1070 remote (i.e., if you want to use two DVD players), you will need to re-assign an unused device button (CBL, AUX, VCR, TV, SAT, CD, or AMP) to operate the second device.

To reassign an unused device button:

1.On the Model 1070 remote, press and hold SETUP until the LED blinks twice, then release SETUP.

2.Enter 992.

The LED will blink twice.

3.Press the button for the device already programmed (i.e., CBL), then press the button for the unused device (i.e., TV).

The LED will blink twice.

4.The button for the unused device is now ready to be programmed for the second component. See Setup Using Preprogrammed Codes.

Volume Control Punch-Through

You can program the Model 1070 remote so that the VOLUME UP, VOLUME DOWN, and MUTE buttons on the remote will control those functions on the Model 1070 even when the remote is set to control another device.

To set volume control punch-through:

1.On the Model 1070 remote, press and hold SETUP until the LED blinks twice, then release SETUP.

2.Enter 993.

3.Press the TNR key on the Model 1070 remote.

The LED will blink twice.

Model 1070 7.1 Channel Surround Sound Receiver

43

Image 43
Contents Model Please Read First When the power-supply cord or plug is damagedInstallation Location Power CordHandle the AC Power Cord Gently WiringTable of Contents Brief Note On This Manual Outlaw Audio Model Channel Surround Sound ReceiverModel 1070 Front Panel AccessoriesActivates or cancels the on-screen menu UnpackingSelects between FM mono and FM stereo Adjusts the volume level of the headphonesModel 1070 Front Panel Selects between AM or FMModel 1070 Rear Panel Model 1070 Rear Panel RP25 Main Power button see pages 26RP22 Preamp audio outputs see pages Other components begins the play function Remote ControlModel 1070 Remote Control These buttons control the Model 1070’s volumeOther components temporarily stops Play or Record Other components activates the recording functionDolby PLIIx-C Surround FormatsAvailable Surround Modes Model 1070 Front Panel and On Screen DisplayDolby Digital EX Dolby DigitalDolby Pro Logic Stereo Listening Modes Connecting Audio Components Connecting Your ModelFor analog connections, remember that CD Player Connecting Audio Equipment to the ModelDigital TV Tuner/Cable Box/Satellite Receiver Connecting Video ComponentsDVD Player Video RecorderDVD-Audio/SACD/DVD Player Connecting a DVD Player to the ModelAudio Connection Note Connecting Other Video Components to the ModelLoudspeaker Connections Antenna ConnectionsGauge If the video display has an Hdmi input Connecting a Video Display to the ModelConnecting Loudspeakers to the Model PoweredOther Connections AC power connectionSubwoofer Connection Supplemental Amplifier ConnectionsWhen using a passive Connecting an External Amplifier to the ModelVideo Connection Record ChartAudio Here’s a brief explanation of each item on the Main menu System SetupInput Configuration Exit Takes you out of Menu modeDVD Configuration sub-menu will appear Input Configuration sub-menu appearsInput choices appear as follows as you scroll through them There is no Lip Sync Delay available for audio-only sources Speaker PlacementUp to 200ms of delay can be selected in 10ms increments Configuring Audio InputsSurround Back Left and Right Speakers Speaker PlacementLeft Front, Center, and Right Front Speakers Left and Right Surround SpeakersSpeaker Size sub-menu appears Speaker Size ConfigurationTo enter settings for speaker size SubwoofersSpeaker X-Over sub-menu appears Speaker X-Over Crossover ConfigurationSelect LB/RB when you have two Surround Back speakers To enter settings for speaker crossoverPanorama Surround Setting ConfigurationsSurround Configuration sub-menu appears Night ModeChannel Subwoofer Offset DimensionHP Headphone Mode Channel CalibrationManual Channel Calibration with Your Own Test Source Channel Calibration sub-menu appearsChannel Calibration with the Model 1070 Test Tone As you desireDelay Settings for Large Rooms Delay AdjustTo set the Delay for each channel You can adjust the level from -70 to +10dB System Configuration SettingsAvailable choices are Direct Operation PowerStandby/On indicator on the front panel will glow amber Model 1070 OperationVolume of the selected source will return at the new level Use this control to adjust the volume levelName of the selected source will reappear in the displays Channel Trim Night Mode SelectionNo Comp means no compression i.e., Night Mode Off Sleep TimerStereo will tune stereo signals Using the AM/FM TunerLip-Synch Delay Adjusting Tone ControlsTo select a preset station Using HeadphonesCreating an AM or FM station-memory preset manually To create FM station-memory presets automaticallyTo install batteries in the remote control Remote Control Setup and OperationBattery Installation Setup Using Preprogrammed CodesLED will blink twice Volume Control Punch-ThroughYou can choose CBL, AUX, VCR, TV, SAT, CD, or AMP Backlighting Setup CodesOperation Source Selection ButtonsDVD Players Televisions TV/VCR Combos VCRs When You Are Away Care and MaintenanceSystem Reset CleaningTroubIeshooting Symptom Possible Cause Solution OptionsModel 1070 Specifications T l a w a u d i o Outlaw Audio Limited Warranty

1070 specifications

Outlaw Audio has made a name for itself in the high-performance audio market, and their Model 1070 receiver is a prime example of their commitment to delivering exceptional sound quality. The Outlaw Audio 1070 is a versatile surround sound receiver that combines advanced technology with user-friendly features, designed to elevate your home theater experience.

One of the standout features of the 1070 is its powerful amplification system. It delivers 7 channels of amplification, each capable of producing 60 watts per channel into 8 ohms. This robust power output ensures that even the most demanding audio tracks are handled with ease, providing clarity and depth across the frequency spectrum. The receiver is also equipped with an array of connection options, including HDMI inputs, to accommodate all of your audio and video sources seamlessly.

The 1070 employs advanced digital processing technologies that enhance your listening experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing you to enjoy multidimensional audio for movies, music, and gaming. Outlaw Audio has integrated their proprietary Outlaw Bass Management system, which offers customizable bass settings to suit your room’s acoustics and your personal preferences. This feature ensures that your subwoofer delivers a seamless integration with your main speakers, enhancing the overall impact of your audio.

For those who appreciate fine-tuning their listening experience, the Outlaw 1070 includes an easy-to-use graphical user interface that simplifies setup and adjustment. The on-screen menus provide straightforward access to configuration settings, making it simple to calibrate your system for optimal performance.

Another key characteristic of the Outlaw 1070 is its build quality. The receiver is housed in a sturdy chassis, designed to minimize interference and reduce vibrations, a consideration that makes a difference in sound quality. The high-quality components and construction reflect Outlaw Audio’s dedication to crafting products that meet the expectations of audiophiles.

In conclusion, the Outlaw Audio 1070 offers a remarkable combination of power, flexibility, and advanced technologies that cater to both casual listeners and serious audiophiles alike. With its impressive amp capabilities, robust surround sound processing, and user-friendly design, the 1070 stands as a compelling choice for anyone looking to enhance their home audio system. Whether you’re enjoying a movie night or listening to your favorite music, the Outlaw Audio 1070 is engineered to deliver an immersive sound experience.