Outlaw Audio owner manual Model 1070 Operation, Power, Direct Operation

Page 37

Sleep

The Model 1070’s sleep timer automatically shuts the unit off after a prede- termined amount of time, from 5 to 90 minutes. The sleep time can also be activated directly from the SLEEP button on the remote control, using the Model 1070’s front-panel display.

To set the Sleep timer from the on-screen display:

1.From the system Config menu, press or to move the cursor to SLEEP.

2.Press the and buttons on the front panel or remote to select the desired setting.

The available choices are:

90MIN75MIN60MIN45MIN30MIN20MIN10MIN5MINOFF

Choosing one of the time settings will cause the Model 1070 to turn itself off after selected amount of time.

Choose OFF to disengage the sleep timer function

To exit the menu system

1.Move the cursor to return to MAIN menu by using the and buttons on the front panel or remote.

2.Press SET on the front panel or the remote.

The Main Menu appears.

3.Move the cursor to EXIT by using the and buttons on the front panel or remote.

4.Press SET on the front panel or the remote.

Your Model 1070 is ready for action! The next section of this manual will give you the information you need to use the Model 1070 on a daily basis, as well as the instructions for programming the remote.

Owner’s Manual

Model 1070 Operation

Model 1070 Operation

Now that you have completed the initial setup and configuration of the Model 1070, you will find it easy to operate. Read the following section to learn the basics of operating the Model 1070, as well as a few tips and tricks that will enhance your enjoyment of your home theater system.

Power

To turn the Model 1070 on:

1.Press the MAIN POWER button on the unit’s rear panel until it latches.

The Standby/On indicator on the front panel will glow amber.

2.Press the STANDBY button on the front panel, or any source button (such as DVD, VIDEO 1, or CD) on the remote control.

The Standby/On indicator will turn green, and the front-panel display will illuminate. If you have previously been using the remote to control another device, remember that the TNR button must be pressed in order for the remote to send commands to the Model 1070.

To turn the Model 1070 off:

nPress the STANDBY button on the front panel or the PWR button on the remote. The Standby/On indicator will turn amber, and the front-panel display will disappear.

NOTE: The PWR button on the remote is used only to turn the Model 1070 OFF. This makes it possible for the Model 1070 to have separate, discrete commands for “on” and “off” that may be used to program an optional programmable remote control. Remember, to turn the Model 1070 ON, press any of the source buttons at the bottom section of the remote.

Direct Operation

In addition to entering settings into the Model 1070 using the on-screen menu system, as described in various sections of this manual, many of the controls may be changed directly at any time using the remote control or the front-panel buttons. We will describe how to make these adjustments in this section.

Source Selection

To select a source/input from the remote control:

nPress one of the source buttons (DVD, CD, VIDEO 1, etc.) on the remote control.

This will turn the Model 1070 on and select the desired input. Remember that in order to actually control the selected source device you must press the appropriate Device Selector Button. These are at the top of the remote, and are the only buttons on the remote with the lettering in white on a black background.

The front-panel display will show the selected source. The on-screen display will also show the selected source unless you have set OSD to OFF in the Input Configuration menu.

Model 1070 7.1 Channel Surround Sound Receiver

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Model Please Read First When the power-supply cord or plug is damagedHandle the AC Power Cord Gently Power CordWiring Installation LocationTable of Contents Brief Note On This Manual Outlaw Audio Model Channel Surround Sound ReceiverActivates or cancels the on-screen menu AccessoriesUnpacking Model 1070 Front PanelModel 1070 Front Panel Adjusts the volume level of the headphonesSelects between AM or FM Selects between FM mono and FM stereoModel 1070 Rear Panel Model 1070 Rear Panel RP25 Main Power button see pages 26RP22 Preamp audio outputs see pages Model 1070 Remote Control Remote ControlThese buttons control the Model 1070’s volume Other components begins the play functionOther components temporarily stops Play or Record Other components activates the recording functionAvailable Surround Modes Surround FormatsModel 1070 Front Panel and On Screen Display Dolby PLIIx-CDolby Digital EX Dolby DigitalDolby Pro Logic Stereo Listening Modes Connecting Audio Components Connecting Your ModelFor analog connections, remember that CD Player Connecting Audio Equipment to the ModelDVD Player Connecting Video ComponentsVideo Recorder Digital TV Tuner/Cable Box/Satellite ReceiverDVD-Audio/SACD/DVD Player Connecting a DVD Player to the ModelAudio Connection Note Connecting Other Video Components to the ModelLoudspeaker Connections Antenna ConnectionsGauge If the video display has an Hdmi input Connecting a Video Display to the ModelConnecting Loudspeakers to the Model PoweredSubwoofer Connection AC power connectionSupplemental Amplifier Connections Other ConnectionsWhen using a passive Connecting an External Amplifier to the ModelVideo Connection Record ChartAudio Input Configuration System SetupExit Takes you out of Menu mode Here’s a brief explanation of each item on the Main menuDVD Configuration sub-menu will appear Input Configuration sub-menu appearsInput choices appear as follows as you scroll through them Up to 200ms of delay can be selected in 10ms increments Speaker PlacementConfiguring Audio Inputs There is no Lip Sync Delay available for audio-only sourcesLeft Front, Center, and Right Front Speakers Speaker PlacementLeft and Right Surround Speakers Surround Back Left and Right SpeakersTo enter settings for speaker size Speaker Size ConfigurationSubwoofers Speaker Size sub-menu appearsSelect LB/RB when you have two Surround Back speakers Speaker X-Over Crossover ConfigurationTo enter settings for speaker crossover Speaker X-Over sub-menu appearsSurround Configuration sub-menu appears Surround Setting ConfigurationsNight Mode PanoramaHP Headphone Mode DimensionChannel Calibration Channel Subwoofer OffsetChannel Calibration with the Model 1070 Test Tone Channel Calibration sub-menu appearsAs you desire Manual Channel Calibration with Your Own Test SourceDelay Settings for Large Rooms Delay AdjustTo set the Delay for each channel You can adjust the level from -70 to +10dB System Configuration SettingsAvailable choices are Standby/On indicator on the front panel will glow amber PowerModel 1070 Operation Direct OperationVolume of the selected source will return at the new level Use this control to adjust the volume levelName of the selected source will reappear in the displays No Comp means no compression i.e., Night Mode Off Night Mode SelectionSleep Timer Channel TrimLip-Synch Delay Using the AM/FM TunerAdjusting Tone Controls Stereo will tune stereo signalsCreating an AM or FM station-memory preset manually Using HeadphonesTo create FM station-memory presets automatically To select a preset stationBattery Installation Remote Control Setup and OperationSetup Using Preprogrammed Codes To install batteries in the remote controlLED will blink twice Volume Control Punch-ThroughYou can choose CBL, AUX, VCR, TV, SAT, CD, or AMP Operation Setup CodesSource Selection Buttons BacklightingDVD Players Televisions TV/VCR Combos VCRs System Reset Care and MaintenanceCleaning When You Are AwayTroubIeshooting Symptom Possible Cause Solution OptionsModel 1070 Specifications T l a w a u d i o Outlaw Audio Limited Warranty

1070 specifications

Outlaw Audio has made a name for itself in the high-performance audio market, and their Model 1070 receiver is a prime example of their commitment to delivering exceptional sound quality. The Outlaw Audio 1070 is a versatile surround sound receiver that combines advanced technology with user-friendly features, designed to elevate your home theater experience.

One of the standout features of the 1070 is its powerful amplification system. It delivers 7 channels of amplification, each capable of producing 60 watts per channel into 8 ohms. This robust power output ensures that even the most demanding audio tracks are handled with ease, providing clarity and depth across the frequency spectrum. The receiver is also equipped with an array of connection options, including HDMI inputs, to accommodate all of your audio and video sources seamlessly.

The 1070 employs advanced digital processing technologies that enhance your listening experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing you to enjoy multidimensional audio for movies, music, and gaming. Outlaw Audio has integrated their proprietary Outlaw Bass Management system, which offers customizable bass settings to suit your room’s acoustics and your personal preferences. This feature ensures that your subwoofer delivers a seamless integration with your main speakers, enhancing the overall impact of your audio.

For those who appreciate fine-tuning their listening experience, the Outlaw 1070 includes an easy-to-use graphical user interface that simplifies setup and adjustment. The on-screen menus provide straightforward access to configuration settings, making it simple to calibrate your system for optimal performance.

Another key characteristic of the Outlaw 1070 is its build quality. The receiver is housed in a sturdy chassis, designed to minimize interference and reduce vibrations, a consideration that makes a difference in sound quality. The high-quality components and construction reflect Outlaw Audio’s dedication to crafting products that meet the expectations of audiophiles.

In conclusion, the Outlaw Audio 1070 offers a remarkable combination of power, flexibility, and advanced technologies that cater to both casual listeners and serious audiophiles alike. With its impressive amp capabilities, robust surround sound processing, and user-friendly design, the 1070 stands as a compelling choice for anyone looking to enhance their home audio system. Whether you’re enjoying a movie night or listening to your favorite music, the Outlaw Audio 1070 is engineered to deliver an immersive sound experience.
Top Page Image Contents