Outlaw Audio 1070 owner manual System Configuration Settings, Available choices are

Page 36

Owner’s Manual

System Setup

System Configuration Settings

This final sub-menu lets you adjust some convenience and comfort parameters that enable you to enjoy the Model 1070 even more by custom tailoring key settings. Note that some of these settings may require a bit of experience with the Model 1070 in its factory default mode before you decide which to change, and to what degree the changes should be made. If you are in a rush to get your new Model 1070 into action, there is no problem in leaving the factory settings in place and returning to this menu later to make the desired changes.

1.Press the MENU button on the front panel or the remote to display the Main Menu.

The Main Menu appears on-screen:

MAIN MENU

> INPUT

CONFIG

SPEAKER

SIZE

SPEAKER

X-OVER

SURROUND

CONFIG

CHANNEL

CALIBRATION

DELAY

ADJUST

SYSTEM

CONFIG

EXIT

 

2.Move the cursor to system config by using the and buttons on the front panel or remote.

3.With the cursor pointing to system config, press SET on the front panel or the remote.

The Channel Calibration sub-menu appears:

system config

>osd time out :3osec display time out :on volume default :last default vol :-25db

sleep :OFF

return to main menu

OSD (On-screen display) Time Out

This setting determines the length of time that the on-screen messages (vol- ume change, input selection, surround mode, etc.) appear on the on-screen display.

To adjust the OSD time out:

1.From the system Config menu, press or to move the cursor to osd time out.

2.Press the and buttons on the front panel or remote to select the desired setting.

The available choices are:

5sec10sec15sec20sec25sec30sec

Display Time Out:

This setting determines if the on screen messages and setup menus time out (disappear from the screen) after the length of time selected in the OSD TIME OUT line, as shown above. In most cases you will want to use the ON setting. However, when making adjustments during the setup process, you may want to leave the menus on until you intentionally turn them off.

To set display time out:

1.From the system Config menu, press or to move the cursor to display time out.

2.Press the and buttons on the front panel or remote to toggle between ON and OFF.

Selecting ON (default) will cause on-screen messages to disappear after the time period set in OSD Time Out.

Selecting OFF will make on-screen messages remain visible until the Menu button on the remote or front panel is pressed.

Volume Default

This setting determines the volume level when the Model 1070 is turned on.

To set the Volume Default:

1.From the system Config menu, press or to move the cursor to volume default.

2.Press the and buttons on the front panel or remote to toggle between last and ON.

Choose LAST (default) to have the Model 1070 always turn on at the same volume level in place when it was turned off.

Choose ON to always have the Model 1070 play at the level specified in Default Volume each time you turn it on.

Default Volume

If you selected ON in the VOLUME DEFAULT menu above, your Model 1070 will always turn on at the same volume. Use the Default Volume setting to enter that volume level.

To set the Default Volume level:

1.From the system Config menu, press or to move the cursor to default volume.

2.Press the and buttons on the front panel or remote to select the desired setting.

You can adjust the level from -70 to +10dB.

Keep in mind that a -70dB setting will be below your threshold of hearing and +10dB may well make your ears bleed.

We suggest something in the range of -30 dB. That way, you’ll be sure to know that your system’s on and working.

36

Outlaw Audio

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Model When the power-supply cord or plug is damaged Please Read FirstPower Cord Handle the AC Power Cord GentlyWiring Installation LocationTable of Contents Outlaw Audio Model Channel Surround Sound Receiver Brief Note On This ManualAccessories Activates or cancels the on-screen menuUnpacking Model 1070 Front PanelAdjusts the volume level of the headphones Model 1070 Front PanelSelects between AM or FM Selects between FM mono and FM stereoModel 1070 Rear Panel RP25 Main Power button see pages 26 Model 1070 Rear PanelRP22 Preamp audio outputs see pages Remote Control Model 1070 Remote ControlThese buttons control the Model 1070’s volume Other components begins the play functionOther components activates the recording function Other components temporarily stops Play or RecordSurround Formats Available Surround ModesModel 1070 Front Panel and On Screen Display Dolby PLIIx-CDolby Digital Dolby Digital EXDolby Pro Logic Stereo Listening Modes Connecting Your Model Connecting Audio ComponentsFor analog connections, remember that Connecting Audio Equipment to the Model CD PlayerConnecting Video Components DVD PlayerVideo Recorder Digital TV Tuner/Cable Box/Satellite ReceiverConnecting a DVD Player to the Model DVD-Audio/SACD/DVD PlayerConnecting Other Video Components to the Model Audio Connection NoteAntenna Connections Loudspeaker ConnectionsGauge Connecting a Video Display to the Model If the video display has an Hdmi inputPowered Connecting Loudspeakers to the ModelAC power connection Subwoofer ConnectionSupplemental Amplifier Connections Other ConnectionsConnecting an External Amplifier to the Model When using a passiveConnection Record Chart VideoAudio System Setup Input ConfigurationExit Takes you out of Menu mode Here’s a brief explanation of each item on the Main menuInput Configuration sub-menu appears DVD Configuration sub-menu will appearInput choices appear as follows as you scroll through them Speaker Placement Up to 200ms of delay can be selected in 10ms incrementsConfiguring Audio Inputs There is no Lip Sync Delay available for audio-only sourcesSpeaker Placement Left Front, Center, and Right Front SpeakersLeft and Right Surround Speakers Surround Back Left and Right SpeakersSpeaker Size Configuration To enter settings for speaker sizeSubwoofers Speaker Size sub-menu appearsSpeaker X-Over Crossover Configuration Select LB/RB when you have two Surround Back speakersTo enter settings for speaker crossover Speaker X-Over sub-menu appearsSurround Setting Configurations Surround Configuration sub-menu appearsNight Mode PanoramaDimension HP Headphone ModeChannel Calibration Channel Subwoofer OffsetChannel Calibration sub-menu appears Channel Calibration with the Model 1070 Test ToneAs you desire Manual Channel Calibration with Your Own Test SourceDelay Adjust Delay Settings for Large RoomsTo set the Delay for each channel System Configuration Settings You can adjust the level from -70 to +10dBAvailable choices are Power Standby/On indicator on the front panel will glow amberModel 1070 Operation Direct OperationUse this control to adjust the volume level Volume of the selected source will return at the new levelName of the selected source will reappear in the displays Night Mode Selection No Comp means no compression i.e., Night Mode OffSleep Timer Channel TrimUsing the AM/FM Tuner Lip-Synch DelayAdjusting Tone Controls Stereo will tune stereo signalsUsing Headphones Creating an AM or FM station-memory preset manuallyTo create FM station-memory presets automatically To select a preset stationRemote Control Setup and Operation Battery InstallationSetup Using Preprogrammed Codes To install batteries in the remote controlVolume Control Punch-Through LED will blink twiceYou can choose CBL, AUX, VCR, TV, SAT, CD, or AMP Setup Codes OperationSource Selection Buttons BacklightingDVD Players Televisions TV/VCR Combos VCRs Care and Maintenance System ResetCleaning When You Are AwaySymptom Possible Cause Solution Options TroubIeshootingModel 1070 Specifications Outlaw Audio Limited Warranty T l a w a u d i o

1070 specifications

Outlaw Audio has made a name for itself in the high-performance audio market, and their Model 1070 receiver is a prime example of their commitment to delivering exceptional sound quality. The Outlaw Audio 1070 is a versatile surround sound receiver that combines advanced technology with user-friendly features, designed to elevate your home theater experience.

One of the standout features of the 1070 is its powerful amplification system. It delivers 7 channels of amplification, each capable of producing 60 watts per channel into 8 ohms. This robust power output ensures that even the most demanding audio tracks are handled with ease, providing clarity and depth across the frequency spectrum. The receiver is also equipped with an array of connection options, including HDMI inputs, to accommodate all of your audio and video sources seamlessly.

The 1070 employs advanced digital processing technologies that enhance your listening experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing you to enjoy multidimensional audio for movies, music, and gaming. Outlaw Audio has integrated their proprietary Outlaw Bass Management system, which offers customizable bass settings to suit your room’s acoustics and your personal preferences. This feature ensures that your subwoofer delivers a seamless integration with your main speakers, enhancing the overall impact of your audio.

For those who appreciate fine-tuning their listening experience, the Outlaw 1070 includes an easy-to-use graphical user interface that simplifies setup and adjustment. The on-screen menus provide straightforward access to configuration settings, making it simple to calibrate your system for optimal performance.

Another key characteristic of the Outlaw 1070 is its build quality. The receiver is housed in a sturdy chassis, designed to minimize interference and reduce vibrations, a consideration that makes a difference in sound quality. The high-quality components and construction reflect Outlaw Audio’s dedication to crafting products that meet the expectations of audiophiles.

In conclusion, the Outlaw Audio 1070 offers a remarkable combination of power, flexibility, and advanced technologies that cater to both casual listeners and serious audiophiles alike. With its impressive amp capabilities, robust surround sound processing, and user-friendly design, the 1070 stands as a compelling choice for anyone looking to enhance their home audio system. Whether you’re enjoying a movie night or listening to your favorite music, the Outlaw Audio 1070 is engineered to deliver an immersive sound experience.
Top Page Image Contents