Outlaw Audio 1070 owner manual Use this control to adjust the volume level

Page 38

Owner’s Manual

Model 1070 Operation

To select a source/input from the front panel:

1.Press the INPUT button on the front panel.

2.Press the or buttons on the front panel to select the source.

The front-panel display will show the selected source (or the name you have chosen for it if you have renamed that input). The on-screen display will also show the selected source unless you have selected OSD: OFF in the Input Configuration menu.

Volume Control

Use this control to adjust the volume level.

To adjust main volume level:

nPress the VOLUME UP or DOWN buttons on the remote, or turn the VOLUME knob on the front panel.

The volume level will be indicated on the front-panel display and the on-screen display (unless you have selected OSD: OFF in the Input Configuration menu). The range of the volume control runs from -70dB to +10dB.

When you use the remote control to adjust the volume setting it will change up or down in 0.5 dB increments if you tap the volume controls up or down slowly. When you hold the volume control buttons down the volume will change quickly, but only in 1dB increments. When the front panel volume control is used the level is changed in 1dB increments.

Muting the Volume

Use this control to turn the sound off momentarily, such as when interrupted by a phone call.

To mute the main volume:

nPress the MUTE button on the front panel or the remote control.

The sound will mute and the word “MUTE” will replace the volume level in the displays and blink on the front-panel display, but remain constant in the on screen display.

To turn mute off:

nPress either MUTE button to restore the volume to its previous level.

The name of the selected source will reappear in the displays.

OR

nPress the VOLUME UP or DOWN buttons on the remote, or turn the VOLUME knob on the front panel.

The volume of the selected source will return at the new level.

Changing the Surround Mode

Use these controls to change the surround mode from the default selected during input configuration. Only the modes that can be used with the signal (stereo, Dolby Digital, or DTS) currently being played will be available for you to select. Seven-channel modes such as Dolby Pro Logic IIx Movie cannot be used unless you have seven speakers connected.

To change the surround mode from the front panel:

1.Press the SURR MODE button.

2.Press the or buttons on the front panel until the name of the desired mode appears.

The selected surround mode is shown on the front-panel display, and the on-screen display unless you selected OSD: OFF in the Input Con- figuration menu.

This method also allows you to select one of the Model 1070’s stereo modes, including stereo, bypass, 5-channel stereo and 7-channel stereo.

To change the surround mode from the remote:

1.Press the DOLBY MODES button or the DTS MODES button, depending on what type of signal you are listening and the mode type desired until the name of the mode you want to select appears.

The selected surround mode will be shown on the front-panel display, and in the on-screen message (unless you selected OSD: OFF in the Input Configuration.). The DOLBY MODES button works with any type of sig- nal. The DTS MODES button works only when you are playing stereo or DTS material.

Changing Stereo Modes

The Model 1070 offers several stereo listening models, including stereo, 5-chan- nel stereo, and 7-channel stereo. With stereo material, such as CDs or FM radio, all of these modes are available. With Dolby Digital and DTS material, most of these modes will be not be available.

To change the stereo mode from the front panel:

1.Press the SURR MODE button.

2.Press the or buttons on the front panel until the name of the desired mode appears.

The selected surround mode will be shown on the front-panel display and in the on-screen messages (unless you selected OSD: OFF in the Input Configuration menu.)

To change the stereo mode from the remote:

nPress the STEREO button until the name of the desired name appears.

The selected stereo mode will be shown on the front-panel display and in the on-screen messages (unless you selected OSD: OFF in the Input Configuration menu.)

Selecting the Bypass Mode

The Model 1070’s Bypass mode allows you to route the signal from an analog stereo input directly from the inputs to the volume control in a “straight-wire” mode, without any digital processing.

To select Bypass from the front panel:

1.Press the SURR MODE button.

2.Press the or buttons on the front panel until Bypass appears.

To select Bypass from the remote:

nPress the Bypass button to toggle between Bypass mode and standard mode with digital processing.

38

Outlaw Audio

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Model When the power-supply cord or plug is damaged Please Read FirstWiring Power CordHandle the AC Power Cord Gently Installation LocationTable of Contents Outlaw Audio Model Channel Surround Sound Receiver Brief Note On This ManualUnpacking AccessoriesActivates or cancels the on-screen menu Model 1070 Front PanelSelects between AM or FM Adjusts the volume level of the headphonesModel 1070 Front Panel Selects between FM mono and FM stereoModel 1070 Rear Panel RP22 Preamp audio outputs see pages RP25 Main Power button see pages 26Model 1070 Rear Panel These buttons control the Model 1070’s volume Remote ControlModel 1070 Remote Control Other components begins the play functionOther components activates the recording function Other components temporarily stops Play or RecordModel 1070 Front Panel and On Screen Display Surround FormatsAvailable Surround Modes Dolby PLIIx-CDolby Pro Logic Dolby DigitalDolby Digital EX Stereo Listening Modes For analog connections, remember that Connecting Your ModelConnecting Audio Components Connecting Audio Equipment to the Model CD PlayerVideo Recorder Connecting Video ComponentsDVD Player Digital TV Tuner/Cable Box/Satellite ReceiverConnecting a DVD Player to the Model DVD-Audio/SACD/DVD PlayerConnecting Other Video Components to the Model Audio Connection NoteGauge Antenna ConnectionsLoudspeaker Connections Connecting a Video Display to the Model If the video display has an Hdmi inputPowered Connecting Loudspeakers to the ModelSupplemental Amplifier Connections AC power connectionSubwoofer Connection Other ConnectionsConnecting an External Amplifier to the Model When using a passiveAudio Connection Record ChartVideo Exit Takes you out of Menu mode System SetupInput Configuration Here’s a brief explanation of each item on the Main menuInput choices appear as follows as you scroll through them Input Configuration sub-menu appearsDVD Configuration sub-menu will appear Configuring Audio Inputs Speaker PlacementUp to 200ms of delay can be selected in 10ms increments There is no Lip Sync Delay available for audio-only sourcesLeft and Right Surround Speakers Speaker PlacementLeft Front, Center, and Right Front Speakers Surround Back Left and Right SpeakersSubwoofers Speaker Size ConfigurationTo enter settings for speaker size Speaker Size sub-menu appearsTo enter settings for speaker crossover Speaker X-Over Crossover ConfigurationSelect LB/RB when you have two Surround Back speakers Speaker X-Over sub-menu appearsNight Mode Surround Setting ConfigurationsSurround Configuration sub-menu appears PanoramaChannel Calibration DimensionHP Headphone Mode Channel Subwoofer OffsetAs you desire Channel Calibration sub-menu appearsChannel Calibration with the Model 1070 Test Tone Manual Channel Calibration with Your Own Test SourceTo set the Delay for each channel Delay AdjustDelay Settings for Large Rooms Available choices are System Configuration SettingsYou can adjust the level from -70 to +10dB Model 1070 Operation PowerStandby/On indicator on the front panel will glow amber Direct OperationName of the selected source will reappear in the displays Use this control to adjust the volume levelVolume of the selected source will return at the new level Sleep Timer Night Mode SelectionNo Comp means no compression i.e., Night Mode Off Channel TrimAdjusting Tone Controls Using the AM/FM TunerLip-Synch Delay Stereo will tune stereo signalsTo create FM station-memory presets automatically Using HeadphonesCreating an AM or FM station-memory preset manually To select a preset stationSetup Using Preprogrammed Codes Remote Control Setup and OperationBattery Installation To install batteries in the remote controlYou can choose CBL, AUX, VCR, TV, SAT, CD, or AMP Volume Control Punch-ThroughLED will blink twice Source Selection Buttons Setup CodesOperation BacklightingDVD Players Televisions TV/VCR Combos VCRs Cleaning Care and MaintenanceSystem Reset When You Are AwaySymptom Possible Cause Solution Options TroubIeshootingModel 1070 Specifications Outlaw Audio Limited Warranty T l a w a u d i o

1070 specifications

Outlaw Audio has made a name for itself in the high-performance audio market, and their Model 1070 receiver is a prime example of their commitment to delivering exceptional sound quality. The Outlaw Audio 1070 is a versatile surround sound receiver that combines advanced technology with user-friendly features, designed to elevate your home theater experience.

One of the standout features of the 1070 is its powerful amplification system. It delivers 7 channels of amplification, each capable of producing 60 watts per channel into 8 ohms. This robust power output ensures that even the most demanding audio tracks are handled with ease, providing clarity and depth across the frequency spectrum. The receiver is also equipped with an array of connection options, including HDMI inputs, to accommodate all of your audio and video sources seamlessly.

The 1070 employs advanced digital processing technologies that enhance your listening experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing you to enjoy multidimensional audio for movies, music, and gaming. Outlaw Audio has integrated their proprietary Outlaw Bass Management system, which offers customizable bass settings to suit your room’s acoustics and your personal preferences. This feature ensures that your subwoofer delivers a seamless integration with your main speakers, enhancing the overall impact of your audio.

For those who appreciate fine-tuning their listening experience, the Outlaw 1070 includes an easy-to-use graphical user interface that simplifies setup and adjustment. The on-screen menus provide straightforward access to configuration settings, making it simple to calibrate your system for optimal performance.

Another key characteristic of the Outlaw 1070 is its build quality. The receiver is housed in a sturdy chassis, designed to minimize interference and reduce vibrations, a consideration that makes a difference in sound quality. The high-quality components and construction reflect Outlaw Audio’s dedication to crafting products that meet the expectations of audiophiles.

In conclusion, the Outlaw Audio 1070 offers a remarkable combination of power, flexibility, and advanced technologies that cater to both casual listeners and serious audiophiles alike. With its impressive amp capabilities, robust surround sound processing, and user-friendly design, the 1070 stands as a compelling choice for anyone looking to enhance their home audio system. Whether you’re enjoying a movie night or listening to your favorite music, the Outlaw Audio 1070 is engineered to deliver an immersive sound experience.
Top Page Image Contents