Outlaw Audio 1070 owner manual TroubIeshooting, Symptom Possible Cause Solution Options

Page 50

Owner’s Manual

Troubleshootong

TroubIeshooting

Your new Model 1070 is designed to provide years of trouble-free operation. However, the complexity of today’s sophisticated home theater systems means that you might encounter an occasional problem with your system involving the Model 1070.

Listed below are some of the more common issues you could encounter. For additional hints on using the Model 1070 or resolving problems we suggest that you look at the Model 1070 section of our website at www.outlawaudio.com, or enter the Model 1070 Section of our Outlaw Saloon. If your problem persists, please call us at 866-OUTLAWS (688-5297) or 866-OUTLAWA (688-5292).

Symptom

Possible Cause

Solution Options

 

 

 

Unit does not turn on when remote or

No AC Power

front panel buttons are pressed

 

Make certain AC power cord is plugged into a live outlet Make certain rear panel MAIN POWER switch is ON

No sound from digital audio source

Input not properly selected

Make certain the correct digital input is associated to the source

 

 

 

No DTS when a DVD is playing

Incorrect bitstream output from DVD player

Check the DVD player’s setup menus to make certain DTS output is selected

 

 

Check the disc menu to make certain DTS is selected

 

 

 

No sound from rear surround speakers

Incorrect speaker configuration

Check Speaker Configuration menu to make certain that surround speakers are set to “small”

 

 

or “large”

 

 

 

Intermittent buzzing in tuner

Interference from local sources

Move or relocate the antenna

 

 

Move the antenna or unit away from computers, fluorescent or neon lights, or appliances

 

 

with motors

Unit does not respond to remote commands

Low remote battery power

Change the batteries

Remote set to different device

Press the TNR button to make sure the remote is outputting 990 codes

Remote sensor is obscured

Make certain the front-panel remote sensor is not blocked or connect an external remote

 

sensor

No sound from one or more channels

Poor connections

Check interconnects to the amplifier and connections from the amplifier to the speakers

 

Incorrect surround mode

Check surround mode to make certain it provides output to all speakers

 

Incorrect speaker configuration

Check Speaker Configuration menu to make certain all speakers are set to “small” or “large”

 

 

 

50

Outlaw Audio

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Model When the power-supply cord or plug is damaged Please Read FirstWiring Power CordHandle the AC Power Cord Gently Installation LocationTable of Contents Outlaw Audio Model Channel Surround Sound Receiver Brief Note On This ManualUnpacking AccessoriesActivates or cancels the on-screen menu Model 1070 Front PanelSelects between AM or FM Adjusts the volume level of the headphonesModel 1070 Front Panel Selects between FM mono and FM stereoModel 1070 Rear Panel RP22 Preamp audio outputs see pages RP25 Main Power button see pages 26Model 1070 Rear Panel These buttons control the Model 1070’s volume Remote ControlModel 1070 Remote Control Other components begins the play functionOther components activates the recording function Other components temporarily stops Play or RecordModel 1070 Front Panel and On Screen Display Surround FormatsAvailable Surround Modes Dolby PLIIx-CDolby Pro Logic Dolby DigitalDolby Digital EX Stereo Listening Modes For analog connections, remember that Connecting Your ModelConnecting Audio Components Connecting Audio Equipment to the Model CD PlayerVideo Recorder Connecting Video ComponentsDVD Player Digital TV Tuner/Cable Box/Satellite ReceiverConnecting a DVD Player to the Model DVD-Audio/SACD/DVD PlayerConnecting Other Video Components to the Model Audio Connection NoteGauge Antenna ConnectionsLoudspeaker Connections Connecting a Video Display to the Model If the video display has an Hdmi inputPowered Connecting Loudspeakers to the ModelSupplemental Amplifier Connections AC power connectionSubwoofer Connection Other ConnectionsConnecting an External Amplifier to the Model When using a passiveAudio Connection Record ChartVideo Exit Takes you out of Menu mode System SetupInput Configuration Here’s a brief explanation of each item on the Main menuInput choices appear as follows as you scroll through them Input Configuration sub-menu appearsDVD Configuration sub-menu will appear Configuring Audio Inputs Speaker PlacementUp to 200ms of delay can be selected in 10ms increments There is no Lip Sync Delay available for audio-only sourcesLeft and Right Surround Speakers Speaker PlacementLeft Front, Center, and Right Front Speakers Surround Back Left and Right SpeakersSubwoofers Speaker Size ConfigurationTo enter settings for speaker size Speaker Size sub-menu appearsTo enter settings for speaker crossover Speaker X-Over Crossover ConfigurationSelect LB/RB when you have two Surround Back speakers Speaker X-Over sub-menu appearsNight Mode Surround Setting ConfigurationsSurround Configuration sub-menu appears PanoramaChannel Calibration DimensionHP Headphone Mode Channel Subwoofer OffsetAs you desire Channel Calibration sub-menu appearsChannel Calibration with the Model 1070 Test Tone Manual Channel Calibration with Your Own Test SourceTo set the Delay for each channel Delay AdjustDelay Settings for Large Rooms Available choices are System Configuration SettingsYou can adjust the level from -70 to +10dB Model 1070 Operation PowerStandby/On indicator on the front panel will glow amber Direct OperationName of the selected source will reappear in the displays Use this control to adjust the volume levelVolume of the selected source will return at the new level Sleep Timer Night Mode SelectionNo Comp means no compression i.e., Night Mode Off Channel TrimAdjusting Tone Controls Using the AM/FM TunerLip-Synch Delay Stereo will tune stereo signalsTo create FM station-memory presets automatically Using HeadphonesCreating an AM or FM station-memory preset manually To select a preset stationSetup Using Preprogrammed Codes Remote Control Setup and OperationBattery Installation To install batteries in the remote controlYou can choose CBL, AUX, VCR, TV, SAT, CD, or AMP Volume Control Punch-ThroughLED will blink twice Source Selection Buttons Setup CodesOperation BacklightingDVD Players Televisions TV/VCR Combos VCRs Cleaning Care and MaintenanceSystem Reset When You Are AwaySymptom Possible Cause Solution Options TroubIeshootingModel 1070 Specifications Outlaw Audio Limited Warranty T l a w a u d i o

1070 specifications

Outlaw Audio has made a name for itself in the high-performance audio market, and their Model 1070 receiver is a prime example of their commitment to delivering exceptional sound quality. The Outlaw Audio 1070 is a versatile surround sound receiver that combines advanced technology with user-friendly features, designed to elevate your home theater experience.

One of the standout features of the 1070 is its powerful amplification system. It delivers 7 channels of amplification, each capable of producing 60 watts per channel into 8 ohms. This robust power output ensures that even the most demanding audio tracks are handled with ease, providing clarity and depth across the frequency spectrum. The receiver is also equipped with an array of connection options, including HDMI inputs, to accommodate all of your audio and video sources seamlessly.

The 1070 employs advanced digital processing technologies that enhance your listening experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing you to enjoy multidimensional audio for movies, music, and gaming. Outlaw Audio has integrated their proprietary Outlaw Bass Management system, which offers customizable bass settings to suit your room’s acoustics and your personal preferences. This feature ensures that your subwoofer delivers a seamless integration with your main speakers, enhancing the overall impact of your audio.

For those who appreciate fine-tuning their listening experience, the Outlaw 1070 includes an easy-to-use graphical user interface that simplifies setup and adjustment. The on-screen menus provide straightforward access to configuration settings, making it simple to calibrate your system for optimal performance.

Another key characteristic of the Outlaw 1070 is its build quality. The receiver is housed in a sturdy chassis, designed to minimize interference and reduce vibrations, a consideration that makes a difference in sound quality. The high-quality components and construction reflect Outlaw Audio’s dedication to crafting products that meet the expectations of audiophiles.

In conclusion, the Outlaw Audio 1070 offers a remarkable combination of power, flexibility, and advanced technologies that cater to both casual listeners and serious audiophiles alike. With its impressive amp capabilities, robust surround sound processing, and user-friendly design, the 1070 stands as a compelling choice for anyone looking to enhance their home audio system. Whether you’re enjoying a movie night or listening to your favorite music, the Outlaw Audio 1070 is engineered to deliver an immersive sound experience.
Top Page Image Contents