Panasonic PT-L595U Adjusting the picture position, When adjusting the horizontal position H-POSI

Page 26

Adjustment func- tion display

Adjusting the picture position

If the picture is not correctly positioned within the display area of the screen so that part of the edge of the picture does not appear, adjust the position of the picture.

The adjustment procedure below describes the on-screen displays when a signal is being input to the S-VIDEO IN terminal or the VIDEO IN terminal.

Adjustment procedure <for horizontal position adjustment>

1.Press the MENU button to display the MENU screen.

2.Press the “ ” and “ ” buttons to select “POSITION”.

3.Press the “<” and “>” buttons to display the POSITION screen.

NOTE:

If the STD (Standard) button is pressed while the POSITION screen at right is being displayed, the letters “STD” will be displayed in yellow in the top-right corner of the screen and all items displayed will be reset to the factory pre- settings. Furthermore, the values and bar displays for items which have returned to the factory pre-settings will be displayed in yellow.

4.Press the “ ” and “ ” buttons to select “H-POSI”.

To adjust the vertical position of the picture, select “V-POSI” instead.

5.Press the “<” and “>” buttons to display the H-POSI individual adjustment screen.

6.Continue pressing the “<” and “>” buttons to adjust the H-POSI setting. The current setting will be displayed on the screen by numerals and a bar.

The adjustment range is between 0 and 95.

Numeric adjustment level display

<When adjusting the horizontal position (H-POSI)>

Bar display

If the “>” button is pressed, the picture moves to the right.

If the “<” button is pressed, the picture moves to the left.

<When adjusting the vertical position (V-POSI)>

If the “>” button is pressed, the picture moves up.

If the “<” button is pressed, the picture moves down.

NOTE:

If approximately five seconds pass without any buttons being pressed while an individual adjustment screen is being displayed, the display will return to the POSITION screen.

Press the MENU button to return to the POSITION screen or to clear the MENU screen.

If the STD (Standard) button is pressed while one of the individual adjustment screens is being displayed, the value and the bar display will be appeared in yellow and only the item displayed will be reset to the factory pre- setting.

25

Image 26

Contents LCD Projector Dear Panasonic Customer ContentsFeatures Important Safety Notice When using the projector Precautions with regard to safetySetting-up If problems occur during useDo not place any heavy objects on top of the projector Cleaning and maintenanceTake particular care when replacing the lamp unit Do not look into the lens while the projector is being usedPrecautions on handling About condensationSide view Location and function of each partFront view Top and front RGB 2 RGB IN/AUDIO Back, bottom and right viewSide terminal board Before using the remote control unit Operating range of the remote control unit If facing the remote control unit toward the screenTurning off the power Turning the power on and offTurning on the power Power button Main Power switchScreen characteristics reference Screen requirementsProjection size Projection distance L Standard setting-up positionsStandard setting-up dimensions Minimum MaximumAdjusting the position of the projected picture Adjustment procedure Setting the projector up horizontallyRetracting the adjustable legs Adjuster button Adjustable legsAdjusting the lens Adjustment procedure for direct adjustmentFront mounting Setting-up positions and changing the projection methodSetting procedure Rear mountingBasic operation Changing the input sourceAuto Switching the signal mode during RGB signal inputSignal data No. of dots VesaNtsc System format selection for S-VIDEO Video input signalsAuto SecamAdjusting the volume Adjusting the picture to the desired setting Adjusting the white balance BAL R BAL G BAL BAdjusting the sound to the desired setting Adjustment procedure for volume adjustmentWhen adjusting the vertical position V-POSI Adjusting the picture positionWhen adjusting the horizontal position H-POSI Adjustment procedure for horizontal position adjustmentTop blanking correction for the V-BLK-T Adjusting the blankingLeft-side blanking correction for the H-BLK-L Bottom blanking correction for the V-BLK-BWhen decreasing the horizontal amplitude Adjusting the horizontal amplitudeWhen increasing the horizontal amplitude Numeric adjustment Level display Adjustment procedure Using other useful functions Disabling the Power button of the remote control unitChanging the on-screen display language to another language Using the power save function Setting procedure Audio system Laser disc player System configuration exampleExample of connection to audio-visual equipment VCRSUB Example of connection to a computerSUB HD About the Macintosh adapter Display mode name/No. of dots S1 S2 S3 S4 S5 S6Accessory mouse cable OperationCommunication settings Using the serial connectorPin layout and signal names for Serial connector Basic formatControl commands Cable specificationsProblem IndicatorsLamp indicator Temp indicator Possible cause RemedyCleaning the air filter Indent Air filter clamp Air filter coverClean the air filter and the air filter clamps Install the air filter coverLamp unit replacement period Replacing the lamp unitFixing screw for the lamp unit Replacement procedureLamp unit cover Fixing screw for the lamp unit cover Page Before asking for service, check the following points Possible causeSpecifications RGB HD/SYNC RGB OUT Audio Video Audio in L-RCeiling Mount Bracket ET-PK592 Trademark AcknowledgementsFCC Dimensions Western Zone Eastern ZoneCentral Zone