Panasonic PT-L595U manual

Page 44

7.Insert the power cord plug into the wall outlet and then press the MAIN POWER switch on the front of the projector to turn on the power.

NOTE:

If the power does not turn on when the MAIN POWER switch is pressed, turn the MAIN POWER switch off again and check that the lamp unit and the lamp unit cover are securely installed. Then turn the MAIN POWER switch back on.

8.Press the POWER button on the projector or remote control unit so that a picture is projected onto the screen.

9.-(1)Press the MENU button to display the MENU screen.

(2)Press the “ ” and “ ” buttons to select “OPTION”.

10.-(1)Press the “<” and “>” buttons to display the OPTION screen. (2)Press the “ ” and “ ” buttons to select “SET UP”.

11. -(1)Press the “<” and “>” buttons to display the SET UP screen. (2)Press the “ ” and “ ” buttons to select “LAMP RUNTIME”.

The cumulative usage time of the current lamp unit will be displayed on the screen.

(3)Press the “>” button on the projector control panel continuously for three second: or more. (The “LAMP RUNTIME” display will change to “TIME RESET”.)

NOTE:

The “>” button on the remote control unit cannot be used at this time. (4)While the SET UP screen (the screen showing “TIME RESET”) is being

displayed, turn off the power. This will reset the cumulative usage time for the lamp unit.

NOTE:

If any other buttons are pressed while “TIME RESET” is being displayed, the display will return to “LAMP RUNTIME” and the button pressed will take effect.

43

Image 44

Contents LCD Projector Dear Panasonic Customer ContentsFeatures Important Safety Notice Precautions with regard to safety Setting-upWhen using the projector If problems occur during useCleaning and maintenance Take particular care when replacing the lamp unitDo not place any heavy objects on top of the projector Do not look into the lens while the projector is being usedPrecautions on handling About condensationSide view Location and function of each partFront view Top and front RGB 2 RGB IN/AUDIO Back, bottom and right viewSide terminal board Before using the remote control unit Operating range of the remote control unit If facing the remote control unit toward the screenTurning the power on and off Turning on the powerTurning off the power Power button Main Power switchScreen characteristics reference Screen requirementsStandard setting-up positions Standard setting-up dimensionsProjection size Projection distance L Minimum MaximumAdjusting the position of the projected picture Setting the projector up horizontally Retracting the adjustable legsAdjustment procedure Adjuster button Adjustable legsAdjusting the lens Adjustment procedure for direct adjustmentSetting-up positions and changing the projection method Setting procedureFront mounting Rear mountingBasic operation Changing the input sourceSwitching the signal mode during RGB signal input Signal data No. of dotsAuto VesaSystem format selection for S-VIDEO Video input signals AutoNtsc SecamAdjusting the volume Adjusting the picture to the desired setting Adjusting the white balance BAL R BAL G BAL BAdjusting the sound to the desired setting Adjustment procedure for volume adjustmentAdjusting the picture position When adjusting the horizontal position H-POSIWhen adjusting the vertical position V-POSI Adjustment procedure for horizontal position adjustmentAdjusting the blanking Left-side blanking correction for the H-BLK-LTop blanking correction for the V-BLK-T Bottom blanking correction for the V-BLK-BWhen decreasing the horizontal amplitude Adjusting the horizontal amplitudeWhen increasing the horizontal amplitude Numeric adjustment Level display Adjustment procedure Using other useful functions Disabling the Power button of the remote control unitChanging the on-screen display language to another language Using the power save function Setting procedure System configuration example Example of connection to audio-visual equipmentAudio system Laser disc player VCRSUB Example of connection to a computerSUB HD Display mode name/No. of dots S1 S2 S3 S4 S5 S6 Accessory mouse cableAbout the Macintosh adapter OperationUsing the serial connector Pin layout and signal names for Serial connectorCommunication settings Basic formatControl commands Cable specificationsIndicators Lamp indicator Temp indicatorProblem Possible cause RemedyCleaning the air filter Indent Air filter clamp Air filter coverClean the air filter and the air filter clamps Install the air filter coverLamp unit replacement period Replacing the lamp unitFixing screw for the lamp unit Replacement procedureLamp unit cover Fixing screw for the lamp unit cover Page Before asking for service, check the following points Possible causeSpecifications RGB HD/SYNC RGB OUT Audio Video Audio in L-RCeiling Mount Bracket ET-PK592 Trademark AcknowledgementsFCC Dimensions Western Zone Eastern ZoneCentral Zone