Panasonic PT-L595U manual Setting procedure

Page 33

Setting the screen color when no signal is input and during picture muting

The projector can be set to project either a solid blue image or a solid black image onto the screen if nothing is connected to the projector’s input terminals, or if equipment is connected but no signal is being input from it. This setting is also effective when picture muting is active and when the countdown timer is running.

At the time of shipment from the factory, the color is set to “BLUE”.

Setting procedure

1.Press the MENU button to display the MENU screen.

2.Press the “ ” and “ ” buttons to select “OPTION”.

3.Press the “<” and “>” buttons to display the OPTION screen.

4.Press the “ ” and “ ” buttons to select “MUTE SETTING”.

5.Press the “<” and “>” buttons to display the MUTE SETTING screen.

6.Press the “ ” and “ ” buttons to select “BACK COLOR”.

7.Press the “<” and “>” buttons to change the setting to “BLUE” or “BLACK”. This will set the color to be projected when no signal is being input.

NOTE:

If a signal that the projector cannot recognize is input, the projector will consider this to be no signal.

Press the MENU button to clear the setting screen and the MENU screen.

Using the MUTE remote control unit button to turn off both sound and picture

At the time of shipment from the factory, the MUTE button on the remote control unit is set so that only the sound is muted when the button is pressed. If you would like the picture to be muted along with the sound, set the PICTURE MUTE function to “ON” by the following procedure.

Setting procedure

The procedure below starts from the MUTE SETTING screen.

1.Press the “ ” and “ ” buttons to select “PICTURE MUTE”.

2.Press the “<” and “>” buttons to change the setting to “ON”.

If the function is set to “ON”, the picture will be muted along with the sound when the MUTE button is pressed.

If the function is set to “OFF”, only the sound will be muted when the MUTE button is pressed. (Factory pre-setting)

NOTE:

Press the MENU button to clear the setting screen and the MENU screen.

When PICTURE MUTE is on, the color projected will be the same color as the

BACK COLOR setting.

32

Image 33

Contents LCD Projector Contents FeaturesDear Panasonic Customer Important Safety Notice Setting-up Precautions with regard to safetyWhen using the projector If problems occur during useTake particular care when replacing the lamp unit Cleaning and maintenanceDo not place any heavy objects on top of the projector Do not look into the lens while the projector is being usedAbout condensation Precautions on handlingLocation and function of each part Front viewSide view Top and front Back, bottom and right view Side terminal boardRGB 2 RGB IN/AUDIO Before using the remote control unit If facing the remote control unit toward the screen Operating range of the remote control unitTurning on the power Turning the power on and offTurning off the power Power button Main Power switchScreen requirements Screen characteristics referenceStandard setting-up dimensions Standard setting-up positionsProjection size Projection distance L Minimum MaximumAdjusting the position of the projected picture Retracting the adjustable legs Setting the projector up horizontallyAdjustment procedure Adjuster button Adjustable legsAdjustment procedure for direct adjustment Adjusting the lensSetting procedure Setting-up positions and changing the projection methodFront mounting Rear mountingChanging the input source Basic operationSignal data No. of dots Switching the signal mode during RGB signal inputAuto VesaAuto System format selection for S-VIDEO Video input signalsNtsc SecamAdjusting the volume Adjusting the picture to the desired setting BAL R BAL G BAL B Adjusting the white balanceAdjustment procedure for volume adjustment Adjusting the sound to the desired settingWhen adjusting the horizontal position H-POSI Adjusting the picture positionWhen adjusting the vertical position V-POSI Adjustment procedure for horizontal position adjustmentLeft-side blanking correction for the H-BLK-L Adjusting the blankingTop blanking correction for the V-BLK-T Bottom blanking correction for the V-BLK-BAdjusting the horizontal amplitude When increasing the horizontal amplitudeWhen decreasing the horizontal amplitude Numeric adjustment Level display Adjustment procedure Disabling the Power button of the remote control unit Using other useful functionsChanging the on-screen display language to another language Using the power save function Setting procedure Example of connection to audio-visual equipment System configuration exampleAudio system Laser disc player VCRExample of connection to a computer SUB HDSUB Accessory mouse cable Display mode name/No. of dots S1 S2 S3 S4 S5 S6About the Macintosh adapter OperationPin layout and signal names for Serial connector Using the serial connectorCommunication settings Basic formatCable specifications Control commandsLamp indicator Temp indicator IndicatorsProblem Possible cause RemedyIndent Air filter clamp Air filter cover Cleaning the air filterInstall the air filter cover Clean the air filter and the air filter clampsReplacing the lamp unit Lamp unit replacement periodReplacement procedure Lamp unit cover Fixing screw for the lamp unit coverFixing screw for the lamp unit Page Possible cause Before asking for service, check the following pointsRGB HD/SYNC RGB OUT Audio Video Audio in L-R SpecificationsTrademark Acknowledgements FCCCeiling Mount Bracket ET-PK592 Dimensions Eastern Zone Central ZoneWestern Zone