Programming
Storing unwanted callers
Storing a single phone number
Important:
RWe recommend storing 10 digits (including the area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked.
n From the caller list:
When a cellular phone is paired:
1MCN CID
2MbN: Select the entry to be blocked. a
MMENUN
R To edit the number: MbN: “Edit” a
MSELECTN
Press MEDITN repeatedly until the phone number is shown in the
3MbN: “Save caller ID” a MSELECTN
4 MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
6Edit the phone number if necessary (24 digits max.).
7MSAVEN a MOFFN
When a cellular phone is not paired:
1MCN CID
2MbN: Select the entry to be blocked. a
MMENUN
R To edit the number: MbN: “Edit” a
MSELECTN
Press MEDITN repeatedly until the phone number is shown in the
3MbN: “Save caller ID” a MSELECTN
4 MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
6Edit the phone number if necessary (24 digits max.).
7 MSAVEN a MOFFN
n By entering phone numbers:
1MMENUN (right soft key) #217
2MbN: “Block a single number” a
MSELECTN
3MMENUN a MbN: “Add” a MSELECTN
4Enter the phone number (24 digits max.). R To erase a digit, press MCLEARN.
5MSAVEN a MOFFN
Storing a range of numbers
1MMENUN (right soft key) #217
2MbN: “Block range of numbers” a
MSELECTN
3MMENUN a MbN: “Add” a MSELECTN
4Enter the desired number
5MSAVEN a MOFFN
Blocking incoming calls that have no phone number
You can reject calls when no phone number is provided, such as private callers or out of area calls.
1MMENUN (right soft key) #240
2MbN: Select the desired setting. a MSAVEN a MOFFN
Note:
RWhen the unit receives a cellular call without a phone number, the call may not be rejected.
Setting the first ring for the call block list
If you do not want the first ring from a number on the call block list to sound, turn the first ring setting to “Off”. The default setting is “On”.
1MMENUN (right soft key) #173
2MbN: Select the desired setting. a MSAVEN a MOFFN
For assistance, please visit http://www.panasonic.com/help | 41 |