Panasonic AWHE50HN manual Changing

Page 31

Basic operations

Menu operation

Wireless remote

 

 

 

Controller

 

 

 

 

 

 

 

 

control

 

AWRP655

 

AWRP555

 

AWRP50

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Returning to the

With the cursor at

With the cursor at the [Return]

With the cursor at the [Return]

With the cursor at the [Return]

previous menu

the [Return] position,

position, press the jog dial

position, press the [ITEM]

position, press the F1 dial.

press the [] button.

(main).

button.

 

 

 

 

 

 

 

 

 

 

 

 

With the cursor at the

 

 

 

 

 

 

 

item to be changed,

1.

Press the jog dial (main) to

1.

Press the [ITEM] button to

1.

Press the F1 dial to start the

 

press the [] button to

 

start the item’s value

 

start the setting blinking.

 

start the setting blinking.

 

setting blinking.

 

2.

Turn the jog dial (main) to

2.

Press the [YES] or [NO]

2.

Turn the F1 dial to change

Changing the

blinking.

 

change the setting.

 

button to change the setting.

 

the setting.

settings

Use the [], [], []

 

 

 

3.

Press the jog dial (main) to

3.

Press the [ITEM] button to

3.

Press the F1 dial to enter

 

and [] buttons to

 

enter the setting (and stop

 

enter the setting (and stop

 

the setting (and stop the

 

change the value, and

 

 

 

 

 

the blinking).

 

the blinking).

 

blinking).

 

press the [] button to

 

 

 

 

 

 

 

 

 

 

 

enter the change.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

While the setting

 

 

 

 

 

 

Canceling the

is blinking, press

While the setting is blinking,

While the setting is blinking,

While the setting is blinking,

the [MENU] button

press the [CAMERA OSD]

setting change

press the jog dial (R).

press the [MENU] button.

quickly (for less than

button.

 

 

 

 

 

 

2 seconds).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Exiting

Press the [MENU]

Press the [MENU] button or

Press the [MENU] button for

Press the [CAMERA OSD]

the menu

button for 2 seconds.

[R/B GAIN/PED] button.

2 seconds.

button for 2 seconds.

operations

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes

ppPerform the menu operations and exit from the menus using the controller which displayed the Top Menu.

If a menu operation has been performed or a menu has been exited using another controller, first display the Top Menu

and exit from it using one controller, and then display the Top Menu and exit from it using the other controller.

ppThe unit uses a different method to operate its menus from the one employed by the convertible cameras (except for the AWHE870) and HD integrated cameras which have already been launched onto the market.

For details, refer to the Operating Instructions of the camera concerned.

31

Image 31
Contents AW‑HE50SN Contents WwOverview Before useWwConcerning the Operating Instructions WwTrademarks and registered trademarks WwRequired personal computer environmentWwAbout copyright and licence WwNetwork security WwDisclaimer of warrantyBasic shooting operations Select the shooting modeWhen the AW‑RP50 is connected How to turn the power on and offWwTurning the power on Set the Operate switch on the controller to onSet the Operate switch on the controller to OFF WwTurning the power offSelecting the shooting modes scene files Selecting the unitsWwTypes of shooting modes WwHow to select the shooting mode Press the OK button again Press the Menu buttonTurn the jog dial main Press the OK buttonQqChanging the camera’s direction QqUsing the zoom functionQqSwitching the direction or zoom speed ShootingMenu screen is displayed Lens focus is not adjusted automaticallyUnit does not move Multiple color bands color bars are displayedMore advanced operations Manual shooting WwManually adjusting the focusWwManually adjusting the iris Press the Shutter button and turn its lamp on WwManually adjusting the shutter speedPress the OFF, LOW or HI button WwManually adjusting the gainPress the Gain button to turn off its lamp Position may occur Preset memoriesHold down the Memory button Set to the memory recording modeSet the memory recording mode Hold down the Reset buttonWhen the AW‑RP555 is connected WwWhite balance adjustment White balance adjustmentQqAutomatic adjustment AWB AWB A or AWB B Press the AWC button Press the SET button for 2 secondsQqAuto tracking white adjustment ATW Press the IRIS - button Black level master pedestal adjustmentWwBlack level master pedestal adjustment Press the M/IRIS buttonPress the Iris button several times to turn off its lamp WwGenlock adjustment Genlock adjustment AW‑HE50S onlyQqHorizontal phase adjustment Press the Mode button QqColor phase adjustmentGenlock adjustment AW‑HE50S only Table of operations Basic operationsChanging Press the  or  button to change the setting Jog dial R Jog dial mainPress the Menu button for 2 seconds to exit the camera menu QqProcedure for camera menu operation AW‑RP655Mode button lights up at the BAR setting Press the Item button QqProcedure for camera menu operation AW‑RP555Press the Menu button of the AW‑RP555 for 2 seconds Perform one of the following steps to select the menu itemCamera OSD QqProcedure for camera menu operation AW‑RP50WwSetting the menu items Setting the menu itemsWwTop Menu WwCamera screen When Manual1 to 3 is selected WwCamera screen When FullAuto is selectedWwContrast screen WwPicture 1/2 screen WwSystem screen WwPicture 2/2 screenWwOutput screen WwGenlock screen AW‑HE50S onlyRGB-NOR Format unchanged screen QqChanging the formatFormat change check screen Format Set screenWwOther 1/2 screen OSD Off With Tally Off, On Tally Enable Disable, EnableWireless Control Disable, Enable WwOther 2/2 screenWwFirmware Version screen WwMaintenance screenInitialize screen Menu settings initialized screenMenu settings unchanged screen QqConcerning initializationMenu item table Menu Factory setting Selection items FullAutoWeb setting screen WwMenu operations Control Setup Power on button / Standby button  Control button / Setup button Zoom  Focus WwControl screen Control pad and its buttons  Preset Brightness QqBasic screen WwSetup screen Basic button Preset position Image  Image Image adjustQqImage screen Image adjust screen  Scene FullAuto, Manual1, Manual2, Manual3  Contrast Contrast Mode Auto, ManualAWB  Picture Chroma Level -3 to +3Preset position setting screen  Preset  Zoom  Limitation Setting  Genlock AW‑HE50S only  Output ENH setting instead Other QqUser mng  IP address Host auth. screen  Host auth Host check QqServer Network screen  IP network QqNetworkIP address Subnet mask Default gatewayPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68  Host name 1 to 64 half-size characters  Password 0 to 32 half-size characters Access interval Ddns screen Contact 0 to 255 half-size characters Snmp screen Community 0 to 32 half-size characters  Location 0 to 32 half-size characters Time & date QqMaintenance Error description System log screenClick the Execute button Upgrade screenEnter the software version in the xxxxx part  Reset to the default and load the default Html files Default reset screen Reset to the default Except the network settings  Load the default Html files setup menu Download Back up screen Upload Other screen Category Display Description of error DDNS-related error displaysNTP-related error displays Login-related displaysLimiters Press one of the CAM1 to CAM4 buttons to select the unit Setting/releasing the limitersWwSetting the limiters WwBasic limiter operationsPp Releasing the lower limit position of the movement range WwResetting the limitersWwReleasing the limiters Pp Releasing the upper limit position of the movement rangeWwConcerning the safe mode Safe modeTrouble-triggered safe mode CPU WwSystem requirements for a PCSymptom WwPrecautions when using Windows VistaSolution Symptom QqRestrictions Restriction When activating audio on the web browserWwPrecautions when using Windows Restriction 2 When using Windows 7 with some products Restriction 1 On the setup pages for some productsPanasonic Solutions Company
Related manuals
Manual 90 pages 20.69 Kb

AWHE50HN specifications

The Panasonic AW-HE50HN is a state-of-the-art PTZ (Pan-Tilt-Zoom) camera designed for professional video production and broadcasting. This versatile camera is favored for its compact design and advanced features, making it an excellent choice for a variety of applications such as live events, education, houses of worship, and corporate environments.

One of the primary highlights of the AW-HE50HN is its impressive imaging capabilities. Equipped with a 1/2.3-inch sensor, it delivers high-definition video quality up to 1080p with a remarkable dynamic range. The camera features a powerful 20x optical zoom lens that allows users to capture distant subjects with clarity while maintaining the quality of the image. This feature is particularly valuable in large venues where the camera might be located far from the action.

The AW-HE50HN also stands out for its superb low-light performance. With a minimum illumination requirement of just 1.6 lux in color mode and 0.3 lux in black and white mode, this camera excels in dimly lit environments, ensuring that every important moment is recorded in high detail.

Networking capabilities are another key aspect of the AW-HE50HN. It supports various streaming protocols, including RTSP and RTMP, allowing for seamless integration into existing networks. This feature makes it ideal for live streaming events directly to the web or for remote monitoring via IP networks. Additionally, the camera can be controlled remotely, offering great flexibility for operators managing multiple cameras during broadcasts.

In terms of usability, the AW-HE50HN is designed with real-time control in mind. It includes multiple control interfaces such as RS-232, RS-422, and LAN, giving operators the freedom to choose the best method for their setup. The camera’s robust built-in protocols ensure compatibility with a variety of third-party controllers, making it a versatile addition to any video production setup.

The AW-HE50HN also boasts a number of special features, including face detection technology and various image stabilization options, which help enhance production quality. Its compact and lightweight design allows for easy installation in any environment, whether it's mounted on a wall, placed on a tripod, or integrated into a more complex studio setup.

In conclusion, the Panasonic AW-HE50HN is a sophisticated and adaptable camera that combines advanced imaging technology with versatile connectivity and remote control options. Its ability to deliver high-quality video in diverse lighting conditions, along with its ease of integration into video production workflows, makes it a preferred choice for professionals in the field. Whether for broadcasting, live events, or corporate use, the AW-HE50HN stands out as a reliable and powerful solution.