Panasonic AWHE50HN manual QqServer

Page 68

Web setting screen

qqServer

This screen has items that relate to the NTP server addresses, port numbers and other NTP server settings.

NTP screen

Time adjustment

<Initial setting: Off>

Select one of the following settings as the time adjustment method.

The time is adjusted by the method selected here and used as the unit’s standard time.

Off

The time is counted from 0:00 on

 

January 1, 1990 as the unit’s startup

 

time.

 

 

Synchronization

The time automatically adjusted in

with NTP server

synchronization with the NTP server

 

is used as the unit’s standard time.

 

 

NTP server address

[1 to 63 half-size characters]

<Initial setting: blank>

The host name or IP address of the NTP server is input here.

Note

NTP port [1 to 65535]

<Initial setting: 123>

The port number of the NTP server is input here.

Time adjustment interval

<Initial setting: 1h>

The interval (1 to 24 hours in 1-hour increments) for acquiring the time from the NTP server and updating the time is selected here.

Time zone

<Initial setting: (GMT -08:00) Pacific Time (US &

Canada), Tijuana>

Select the time zone that corresponds with the region in which the unit is going to be used.

ppTo input the “NTP server address” host name, the DNS setting must be selected on the Network screen (see page 70) of the Network settings.

68

Page 67 Page 69
Image 68
Page 67 Page 69
Contents AW‑HE50SN Contents WwConcerning the Operating Instructions Before useWwOverview WwAbout copyright and licence WwRequired personal computer environmentWwTrademarks and registered trademarks WwDisclaimer of warranty WwNetwork securitySelect the shooting mode Basic shooting operationsHow to turn the power on and off WwTurning the power onSet the Operate switch on the controller to on When the AW‑RP50 is connectedWwTurning the power off Set the Operate switch on the controller to OFFWwTypes of shooting modes Selecting the unitsSelecting the shooting modes scene files WwHow to select the shooting mode Press the Menu button Turn the jog dial mainPress the OK button Press the OK button againQqUsing the zoom function QqSwitching the direction or zoom speedShooting QqChanging the camera’s directionLens focus is not adjusted automatically Unit does not moveMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations WwManually adjusting the focus Manual shootingWwManually adjusting the iris WwManually adjusting the shutter speed Press the Shutter button and turn its lamp onPress the Gain button to turn off its lamp WwManually adjusting the gainPress the OFF, LOW or HI button Preset memories Position may occurSet to the memory recording mode Set the memory recording modeHold down the Reset button Hold down the Memory buttonWhen the AW‑RP555 is connected QqAutomatic adjustment AWB AWB A or AWB B White balance adjustmentWwWhite balance adjustment Press the SET button for 2 seconds Press the AWC buttonQqAuto tracking white adjustment ATW Black level master pedestal adjustment WwBlack level master pedestal adjustmentPress the M/IRIS button Press the IRIS - buttonPress the Iris button several times to turn off its lamp QqHorizontal phase adjustment Genlock adjustment AW‑HE50S onlyWwGenlock adjustment QqColor phase adjustment Press the Mode buttonGenlock adjustment AW‑HE50S only Basic operations Table of operationsChanging Press the  or  button to change the setting Jog dial main Jog dial RQqProcedure for camera menu operation AW‑RP655 Press the Menu button for 2 seconds to exit the camera menuMode button lights up at the BAR setting QqProcedure for camera menu operation AW‑RP555 Press the Menu button of the AW‑RP555 for 2 secondsPerform one of the following steps to select the menu item Press the Item buttonQqProcedure for camera menu operation AW‑RP50 Camera OSDWwTop Menu Setting the menu itemsWwSetting the menu items WwCamera screen When FullAuto is selected WwCamera screen When Manual1 to 3 is selectedWwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen WwSystem screenWwGenlock screen AW‑HE50S only WwOutput screenRGB-NOR QqChanging the format Format change check screenFormat Set screen Format unchanged screenWwOther 1/2 screen Tally Enable Disable, Enable Wireless Control Disable, EnableWwOther 2/2 screen OSD Off With Tally Off, OnWwMaintenance screen WwFirmware Version screenMenu settings initialized screen Menu settings unchanged screenQqConcerning initialization Initialize screenMenu Factory setting Selection items FullAuto Menu item tableWeb setting screen Control Setup WwMenu operations Control button / Setup button  Power on button / Standby buttonWwControl screen  Zoom  Focus Brightness  Preset Control pad and its buttons  Basic button WwSetup screenQqBasic screen QqImage screen Image  Image Image adjustPreset position Image adjust screen  Contrast Contrast Mode Auto, Manual  Scene FullAuto, Manual1, Manual2, Manual3 Picture Chroma Level -3 to +3 AWBPreset position setting screen  Preset  Zoom  Limitation Setting  Genlock AW‑HE50S only ENH setting instead  Output Other QqUser mng  Host check Host auth. screen  Host auth IP address QqServer IP address QqNetworkNetwork screen  IP network Port numbers already used 20, 21, 23, 25, 42, 53, 67, 68 Default gatewaySubnet mask  Password 0 to 32 half-size characters  Access intervalDdns screen  Host name 1 to 64 half-size charactersSnmp screen  Community 0 to 32 half-size characters Location 0 to 32 half-size characters  Contact 0 to 255 half-size charactersQqMaintenance  Error descriptionSystem log screen  Time & dateUpgrade screen Click the Execute buttonEnter the software version in the xxxxx part Default reset screen  Reset to the default Except the network settings Load the default Html files setup menu  Reset to the default and load the default Html files Upload Back up screen Download Other screen DDNS-related error displays NTP-related error displaysLogin-related displays Category Display Description of errorLimiters Setting/releasing the limiters WwSetting the limitersWwBasic limiter operations Press one of the CAM1 to CAM4 buttons to select the unitWwResetting the limiters WwReleasing the limitersPp Releasing the upper limit position of the movement range Pp Releasing the lower limit position of the movement rangeTrouble-triggered safe mode Safe modeWwConcerning the safe mode WwSystem requirements for a PC CPUSolution WwPrecautions when using Windows VistaSymptom Symptom Restriction When activating audio on the web browser QqRestrictionsWwPrecautions when using Windows Restriction 1 On the setup pages for some products Restriction 2 When using Windows 7 with some productsPanasonic Solutions Company
Related manuals
Manual 90 pages 20.69 Kb

AWHE50HN specifications

The Panasonic AW-HE50HN is a state-of-the-art PTZ (Pan-Tilt-Zoom) camera designed for professional video production and broadcasting. This versatile camera is favored for its compact design and advanced features, making it an excellent choice for a variety of applications such as live events, education, houses of worship, and corporate environments.

One of the primary highlights of the AW-HE50HN is its impressive imaging capabilities. Equipped with a 1/2.3-inch sensor, it delivers high-definition video quality up to 1080p with a remarkable dynamic range. The camera features a powerful 20x optical zoom lens that allows users to capture distant subjects with clarity while maintaining the quality of the image. This feature is particularly valuable in large venues where the camera might be located far from the action.

The AW-HE50HN also stands out for its superb low-light performance. With a minimum illumination requirement of just 1.6 lux in color mode and 0.3 lux in black and white mode, this camera excels in dimly lit environments, ensuring that every important moment is recorded in high detail.

Networking capabilities are another key aspect of the AW-HE50HN. It supports various streaming protocols, including RTSP and RTMP, allowing for seamless integration into existing networks. This feature makes it ideal for live streaming events directly to the web or for remote monitoring via IP networks. Additionally, the camera can be controlled remotely, offering great flexibility for operators managing multiple cameras during broadcasts.

In terms of usability, the AW-HE50HN is designed with real-time control in mind. It includes multiple control interfaces such as RS-232, RS-422, and LAN, giving operators the freedom to choose the best method for their setup. The camera’s robust built-in protocols ensure compatibility with a variety of third-party controllers, making it a versatile addition to any video production setup.

The AW-HE50HN also boasts a number of special features, including face detection technology and various image stabilization options, which help enhance production quality. Its compact and lightweight design allows for easy installation in any environment, whether it's mounted on a wall, placed on a tripod, or integrated into a more complex studio setup.

In conclusion, the Panasonic AW-HE50HN is a sophisticated and adaptable camera that combines advanced imaging technology with versatile connectivity and remote control options. Its ability to deliver high-quality video in diverse lighting conditions, along with its ease of integration into video production workflows, makes it a preferred choice for professionals in the field. Whether for broadcasting, live events, or corporate use, the AW-HE50HN stands out as a reliable and powerful solution.
Top Page Image Contents