Panasonic AWHE50HN manual Upgrade screen, Click the Execute button

Page 74

Web setting screen

Upgrade screen

On this screen, it is possible to check the unit’s software versions and upgrade them to the latest versions. For details on the software used for version upgrading, consult your dealer.

The “Model no.”, “MAC address”, “Serial no.”, “Firmware version” and other information about the unit is displayed.

1After consulting with your dealer, download the latest software to the hard disk of your personal computer.

Note

4Click the radio button underneath, and after the software version has been upgraded, select whether to initialize the data.

ppNo spaces or full-size characters can be used for the directory in which the software will be stored.

2Select the software to be upgraded by clicking the [Camera Main] or [Network] radio button.

3Click the Browse button, and specify the downloaded software.

ppJudge whether or not to initialize the data after reading through the Readme file which accompanies the software.

5Click the Execute button.

The software version is upgraded, and the screen on which to check data initialization is displayed.

If the data is not going to be initialized after the version has been upgraded, the check screen is not displayed. After upgrading the software version, be absolutely sure to delete the temporary Internet files.

74

Page 73 Page 75
Image 74
Page 73 Page 75
Contents AW‑HE50SN Contents WwConcerning the Operating Instructions Before useWwOverview WwAbout copyright and licence WwRequired personal computer environmentWwTrademarks and registered trademarks WwDisclaimer of warranty WwNetwork securitySelect the shooting mode Basic shooting operationsSet the Operate switch on the controller to on How to turn the power on and offWwTurning the power on When the AW‑RP50 is connectedWwTurning the power off Set the Operate switch on the controller to OFFWwTypes of shooting modes Selecting the unitsSelecting the shooting modes scene files WwHow to select the shooting mode Press the OK button Press the Menu buttonTurn the jog dial main Press the OK button againShooting QqUsing the zoom functionQqSwitching the direction or zoom speed QqChanging the camera’s directionMultiple color bands color bars are displayed Lens focus is not adjusted automaticallyUnit does not move Menu screen is displayedMore advanced operations WwManually adjusting the focus Manual shootingWwManually adjusting the iris WwManually adjusting the shutter speed Press the Shutter button and turn its lamp onPress the Gain button to turn off its lamp WwManually adjusting the gainPress the OFF, LOW or HI button Preset memories Position may occurHold down the Reset button Set to the memory recording modeSet the memory recording mode Hold down the Memory buttonWhen the AW‑RP555 is connected QqAutomatic adjustment AWB AWB A or AWB B White balance adjustmentWwWhite balance adjustment Press the SET button for 2 seconds Press the AWC buttonQqAuto tracking white adjustment ATW Press the M/IRIS button Black level master pedestal adjustmentWwBlack level master pedestal adjustment Press the IRIS - buttonPress the Iris button several times to turn off its lamp QqHorizontal phase adjustment Genlock adjustment AW‑HE50S onlyWwGenlock adjustment QqColor phase adjustment Press the Mode buttonGenlock adjustment AW‑HE50S only Basic operations Table of operationsChanging Press the  or  button to change the setting Jog dial main Jog dial RQqProcedure for camera menu operation AW‑RP655 Press the Menu button for 2 seconds to exit the camera menuMode button lights up at the BAR setting Perform one of the following steps to select the menu item QqProcedure for camera menu operation AW‑RP555Press the Menu button of the AW‑RP555 for 2 seconds Press the Item buttonQqProcedure for camera menu operation AW‑RP50 Camera OSDWwTop Menu Setting the menu itemsWwSetting the menu items WwCamera screen When FullAuto is selected WwCamera screen When Manual1 to 3 is selectedWwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen WwSystem screenWwGenlock screen AW‑HE50S only WwOutput screenRGB-NOR Format Set screen QqChanging the formatFormat change check screen Format unchanged screenWwOther 1/2 screen WwOther 2/2 screen Tally Enable Disable, EnableWireless Control Disable, Enable OSD Off With Tally Off, OnWwMaintenance screen WwFirmware Version screenQqConcerning initialization Menu settings initialized screenMenu settings unchanged screen Initialize screenMenu Factory setting Selection items FullAuto Menu item tableWeb setting screen Control Setup WwMenu operations Control button / Setup button  Power on button / Standby buttonWwControl screen  Zoom  Focus Brightness  Preset Control pad and its buttons  Basic button WwSetup screenQqBasic screen QqImage screen Image  Image Image adjustPreset position Image adjust screen  Contrast Contrast Mode Auto, Manual  Scene FullAuto, Manual1, Manual2, Manual3 Picture Chroma Level -3 to +3 AWBPreset position setting screen  Preset  Zoom  Limitation Setting  Genlock AW‑HE50S only ENH setting instead  Output Other QqUser mng  Host check Host auth. screen  Host auth IP address QqServer IP address QqNetworkNetwork screen  IP network Port numbers already used 20, 21, 23, 25, 42, 53, 67, 68 Default gatewaySubnet mask Ddns screen  Password 0 to 32 half-size characters Access interval  Host name 1 to 64 half-size characters Location 0 to 32 half-size characters Snmp screen Community 0 to 32 half-size characters  Contact 0 to 255 half-size charactersSystem log screen QqMaintenance Error description  Time & dateUpgrade screen Click the Execute buttonEnter the software version in the xxxxx part  Load the default Html files setup menu Default reset screen Reset to the default Except the network settings  Reset to the default and load the default Html files Upload Back up screen Download Other screen Login-related displays DDNS-related error displaysNTP-related error displays Category Display Description of errorLimiters WwBasic limiter operations Setting/releasing the limitersWwSetting the limiters Press one of the CAM1 to CAM4 buttons to select the unitPp Releasing the upper limit position of the movement range WwResetting the limitersWwReleasing the limiters Pp Releasing the lower limit position of the movement rangeTrouble-triggered safe mode Safe modeWwConcerning the safe mode WwSystem requirements for a PC CPUSolution WwPrecautions when using Windows VistaSymptom Symptom Restriction When activating audio on the web browser QqRestrictionsWwPrecautions when using Windows Restriction 1 On the setup pages for some products Restriction 2 When using Windows 7 with some productsPanasonic Solutions Company
Related manuals
Manual 90 pages 20.69 Kb

AWHE50HN specifications

The Panasonic AW-HE50HN is a state-of-the-art PTZ (Pan-Tilt-Zoom) camera designed for professional video production and broadcasting. This versatile camera is favored for its compact design and advanced features, making it an excellent choice for a variety of applications such as live events, education, houses of worship, and corporate environments.

One of the primary highlights of the AW-HE50HN is its impressive imaging capabilities. Equipped with a 1/2.3-inch sensor, it delivers high-definition video quality up to 1080p with a remarkable dynamic range. The camera features a powerful 20x optical zoom lens that allows users to capture distant subjects with clarity while maintaining the quality of the image. This feature is particularly valuable in large venues where the camera might be located far from the action.

The AW-HE50HN also stands out for its superb low-light performance. With a minimum illumination requirement of just 1.6 lux in color mode and 0.3 lux in black and white mode, this camera excels in dimly lit environments, ensuring that every important moment is recorded in high detail.

Networking capabilities are another key aspect of the AW-HE50HN. It supports various streaming protocols, including RTSP and RTMP, allowing for seamless integration into existing networks. This feature makes it ideal for live streaming events directly to the web or for remote monitoring via IP networks. Additionally, the camera can be controlled remotely, offering great flexibility for operators managing multiple cameras during broadcasts.

In terms of usability, the AW-HE50HN is designed with real-time control in mind. It includes multiple control interfaces such as RS-232, RS-422, and LAN, giving operators the freedom to choose the best method for their setup. The camera’s robust built-in protocols ensure compatibility with a variety of third-party controllers, making it a versatile addition to any video production setup.

The AW-HE50HN also boasts a number of special features, including face detection technology and various image stabilization options, which help enhance production quality. Its compact and lightweight design allows for easy installation in any environment, whether it's mounted on a wall, placed on a tripod, or integrated into a more complex studio setup.

In conclusion, the Panasonic AW-HE50HN is a sophisticated and adaptable camera that combines advanced imaging technology with versatile connectivity and remote control options. Its ability to deliver high-quality video in diverse lighting conditions, along with its ease of integration into video production workflows, makes it a preferred choice for professionals in the field. Whether for broadcasting, live events, or corporate use, the AW-HE50HN stands out as a reliable and powerful solution.
Top Page Image Contents