Panasonic AWHE50HN manual Subnet mask, Default gateway

Page 70

Web setting screen

Subnet mask

<Initial setting: 255.255.255.0>

Input the unit’s subnet mask here if the DHCP function is not going to be used.

Default gateway

<Initial setting: 192.168.0.1>

Input the unit’s default gateway if the DHCP function is not going to be used.

ppMultiple IP addresses cannot be used for the default gateway even when the DHCP function is used.

For details on the DHCP server settings, consult your network administrator.

DNS

<Initial setting: Manual>

Whether the DNS server address is to be acquired automatically (Auto) or manually (Manual) is input here. If “Manual” has been selected, the DNS settings must be established.

If “Auto” is selected when the DHCP function is going to be used, the DNS server address is acquired automatically.

For further details, consult your system administrator.

Primary server address Secondary server address <Initial setting: blank>

Input the IP address of the DNS server if the “Manual” setting has been selected for “DNS”.

For details on the IP address of the DNS server, consult your system administrator.

HTTP port [1 to 65535] <Initial setting: 80>

The port number is allocated here separately.

The following port numbers are used by the unit therefore cannot be used.

Port numbers already used 20, 21, 23, 25, 42, 53, 67, 68, 69,

110, 123, 161, 162, 554, 995, 10669, 10670, 59000 to 59999, 60000 to 61000

Line speed <Initial setting: Auto>

Select one of the following data line speeds. Normally, it is recommended that the “Auto” default setting be used.

Auto

The line speed is set automatically.

 

 

100 M-Full

The line speed is set to 100 Mbps full

 

duplex.

100 M-Half

The line speed is set to 100 Mbps half

 

duplex.

 

 

10 M-Full

The line speed is set to 10 Mbps full duplex.

 

 

10 M-Half

The line speed is set to 10 Mbps half duplex.

 

 

FTP access to camera <Initial setting: Forbid>

Whether FTP access to the camera is to be allowed is set by selecting “Allow” or “Forbid”.

Bandwidth control(bit rate) <Initial setting: Unlimited>

Select one of the following data bandwidth settings.

Unlimited

384 kbps

2048 kbps

 

 

 

64 kbps

512 kbps

4096 kbps

 

 

 

128 kbps

768 kbps

8192 kbps

 

 

 

256 kbps

1024 kbps

 

 

 

 

Easy IP Setup accommodate period <Initial setting: Unlimited>

Select “20min” or “Unlimited” as the time for enabling the operation of the network settings from the Easy IP Setup Software.

20min

The setting operations from the Easy IP

 

Setup Software are enabled for 20 minutes

 

after the camera has started operating.

 

 

Unlimited

The setting operations from the Easy IP

 

Setup Software are enabled at all times.

70

Page 69 Page 71
Image 70
Page 69 Page 71
Contents AW‑HE50SN Contents WwOverview Before useWwConcerning the Operating Instructions WwTrademarks and registered trademarks WwRequired personal computer environmentWwAbout copyright and licence WwDisclaimer of warranty WwNetwork securitySelect the shooting mode Basic shooting operationsSet the Operate switch on the controller to on How to turn the power on and offWwTurning the power on When the AW‑RP50 is connectedWwTurning the power off Set the Operate switch on the controller to OFFSelecting the shooting modes scene files Selecting the unitsWwTypes of shooting modes WwHow to select the shooting mode Press the OK button Press the Menu buttonTurn the jog dial main Press the OK button againShooting QqUsing the zoom functionQqSwitching the direction or zoom speed QqChanging the camera’s directionMultiple color bands color bars are displayed Lens focus is not adjusted automaticallyUnit does not move Menu screen is displayedMore advanced operations WwManually adjusting the focus Manual shootingWwManually adjusting the iris WwManually adjusting the shutter speed Press the Shutter button and turn its lamp onPress the OFF, LOW or HI button WwManually adjusting the gainPress the Gain button to turn off its lamp Preset memories Position may occurHold down the Reset button Set to the memory recording modeSet the memory recording mode Hold down the Memory buttonWhen the AW‑RP555 is connected WwWhite balance adjustment White balance adjustmentQqAutomatic adjustment AWB AWB A or AWB B Press the SET button for 2 seconds Press the AWC buttonQqAuto tracking white adjustment ATW Press the M/IRIS button Black level master pedestal adjustmentWwBlack level master pedestal adjustment Press the IRIS - buttonPress the Iris button several times to turn off its lamp WwGenlock adjustment Genlock adjustment AW‑HE50S onlyQqHorizontal phase adjustment QqColor phase adjustment Press the Mode buttonGenlock adjustment AW‑HE50S only Basic operations Table of operationsChanging Press the  or  button to change the setting Jog dial main Jog dial RQqProcedure for camera menu operation AW‑RP655 Press the Menu button for 2 seconds to exit the camera menuMode button lights up at the BAR setting Perform one of the following steps to select the menu item QqProcedure for camera menu operation AW‑RP555Press the Menu button of the AW‑RP555 for 2 seconds Press the Item buttonQqProcedure for camera menu operation AW‑RP50 Camera OSDWwSetting the menu items Setting the menu itemsWwTop Menu WwCamera screen When FullAuto is selected WwCamera screen When Manual1 to 3 is selectedWwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen WwSystem screenWwGenlock screen AW‑HE50S only WwOutput screenRGB-NOR Format Set screen QqChanging the formatFormat change check screen Format unchanged screenWwOther 1/2 screen WwOther 2/2 screen Tally Enable Disable, EnableWireless Control Disable, Enable OSD Off With Tally Off, OnWwMaintenance screen WwFirmware Version screenQqConcerning initialization Menu settings initialized screenMenu settings unchanged screen Initialize screenMenu Factory setting Selection items FullAuto Menu item tableWeb setting screen Control Setup WwMenu operations Control button / Setup button  Power on button / Standby buttonWwControl screen  Zoom  Focus Control pad and its buttons  Preset Brightness QqBasic screen WwSetup screen Basic button Preset position Image  Image Image adjustQqImage screen Image adjust screen  Contrast Contrast Mode Auto, Manual  Scene FullAuto, Manual1, Manual2, Manual3 Picture Chroma Level -3 to +3 AWBPreset position setting screen  Preset  Zoom  Limitation Setting  Genlock AW‑HE50S only ENH setting instead  Output Other QqUser mng  IP address Host auth. screen  Host auth Host check QqServer Network screen  IP network QqNetworkIP address Subnet mask Default gatewayPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68 Ddns screen  Password 0 to 32 half-size characters Access interval  Host name 1 to 64 half-size characters Location 0 to 32 half-size characters Snmp screen Community 0 to 32 half-size characters  Contact 0 to 255 half-size charactersSystem log screen QqMaintenance Error description  Time & dateUpgrade screen Click the Execute buttonEnter the software version in the xxxxx part  Load the default Html files setup menu Default reset screen Reset to the default Except the network settings  Reset to the default and load the default Html files Download Back up screen Upload Other screen Login-related displays DDNS-related error displaysNTP-related error displays Category Display Description of errorLimiters WwBasic limiter operations Setting/releasing the limitersWwSetting the limiters Press one of the CAM1 to CAM4 buttons to select the unitPp Releasing the upper limit position of the movement range WwResetting the limitersWwReleasing the limiters Pp Releasing the lower limit position of the movement rangeWwConcerning the safe mode Safe modeTrouble-triggered safe mode WwSystem requirements for a PC CPUSymptom WwPrecautions when using Windows VistaSolution Symptom Restriction When activating audio on the web browser QqRestrictionsWwPrecautions when using Windows Restriction 1 On the setup pages for some products Restriction 2 When using Windows 7 with some productsPanasonic Solutions Company
Related manuals
Manual 90 pages 20.69 Kb

AWHE50HN specifications

The Panasonic AW-HE50HN is a state-of-the-art PTZ (Pan-Tilt-Zoom) camera designed for professional video production and broadcasting. This versatile camera is favored for its compact design and advanced features, making it an excellent choice for a variety of applications such as live events, education, houses of worship, and corporate environments.

One of the primary highlights of the AW-HE50HN is its impressive imaging capabilities. Equipped with a 1/2.3-inch sensor, it delivers high-definition video quality up to 1080p with a remarkable dynamic range. The camera features a powerful 20x optical zoom lens that allows users to capture distant subjects with clarity while maintaining the quality of the image. This feature is particularly valuable in large venues where the camera might be located far from the action.

The AW-HE50HN also stands out for its superb low-light performance. With a minimum illumination requirement of just 1.6 lux in color mode and 0.3 lux in black and white mode, this camera excels in dimly lit environments, ensuring that every important moment is recorded in high detail.

Networking capabilities are another key aspect of the AW-HE50HN. It supports various streaming protocols, including RTSP and RTMP, allowing for seamless integration into existing networks. This feature makes it ideal for live streaming events directly to the web or for remote monitoring via IP networks. Additionally, the camera can be controlled remotely, offering great flexibility for operators managing multiple cameras during broadcasts.

In terms of usability, the AW-HE50HN is designed with real-time control in mind. It includes multiple control interfaces such as RS-232, RS-422, and LAN, giving operators the freedom to choose the best method for their setup. The camera’s robust built-in protocols ensure compatibility with a variety of third-party controllers, making it a versatile addition to any video production setup.

The AW-HE50HN also boasts a number of special features, including face detection technology and various image stabilization options, which help enhance production quality. Its compact and lightweight design allows for easy installation in any environment, whether it's mounted on a wall, placed on a tripod, or integrated into a more complex studio setup.

In conclusion, the Panasonic AW-HE50HN is a sophisticated and adaptable camera that combines advanced imaging technology with versatile connectivity and remote control options. Its ability to deliver high-quality video in diverse lighting conditions, along with its ease of integration into video production workflows, makes it a preferred choice for professionals in the field. Whether for broadcasting, live events, or corporate use, the AW-HE50HN stands out as a reliable and powerful solution.
Top Page Image Contents