Panasonic AWHE50HN manual More advanced operations

Page 14

More advanced operations

Manual shooting (see pages 15 to 18)

ppManual adjustment of focus pp Manual adjustment of iris

pp Manual adjustment of shutter speed pp Manual adjustment of gain

Black level (master pedestal) adjustment (see pages 25 to 26)

ppThis adjustment is performed to align the black level (pedestal level) of a multiple number of cameras.

ppAsk your dealer to perform this adjustment.

Preset memories (see pages 19 to 21)

ppUp to 100 settings for the camera direction (panning and tilting), zoom, focus, iris, gain up and white balance can

be registered in the preset memories, and called.

ppThe number of settings that can be registered and called depends on the type of wireless remote control (12 settings) or controller that is used for operation.

White balance adjustment (see pages 22 to 24)

ppThis adjustment is performed to express the white accurately. Its setting also has an effect on the color tones

of the entire screen.

ppIt must be performed when using the unit for the first

time or when the unit has not been used for a prolonged period.

ppIt must be performed when the lighting conditions or brightness has changed.

ppOnce the white balance has been attained, no further adjustment is required provided that the unit is going to be used under the same conditions.

Genlock adjustment (AWHE50S only) (see pages 27 to 29)

ppThis adjustment is performed to achieve phase alignment by applying external synchronization (genlock) when a multiple number of cameras will be used or when the unit will be used in combination with other devices.

ppAsk your dealer to perform this adjustment.

14

Image 14 Contents
AW‑HE50SN Contents WwConcerning the Operating Instructions Before useWwOverview WwAbout copyright and licence WwRequired personal computer environmentWwTrademarks and registered trademarks WwDisclaimer of warranty WwNetwork securitySelect the shooting mode Basic shooting operationsSet the Operate switch on the controller to on How to turn the power on and offWwTurning the power on When the AW‑RP50 is connectedWwTurning the power off Set the Operate switch on the controller to OFFWwTypes of shooting modes Selecting the unitsSelecting the shooting modes scene files WwHow to select the shooting mode Press the OK button Press the Menu buttonTurn the jog dial main Press the OK button againShooting QqUsing the zoom functionQqSwitching the direction or zoom speed QqChanging the camera’s directionMultiple color bands color bars are displayed Lens focus is not adjusted automaticallyUnit does not move Menu screen is displayedMore advanced operations WwManually adjusting the focus Manual shootingWwManually adjusting the iris WwManually adjusting the shutter speed Press the Shutter button and turn its lamp onPress the Gain button to turn off its lamp WwManually adjusting the gainPress the OFF, LOW or HI button Preset memories Position may occurHold down the Reset button Set to the memory recording modeSet the memory recording mode Hold down the Memory buttonWhen the AW‑RP555 is connected QqAutomatic adjustment AWB AWB A or AWB B White balance adjustmentWwWhite balance adjustment Press the SET button for 2 seconds Press the AWC buttonQqAuto tracking white adjustment ATW Press the M/IRIS button Black level master pedestal adjustmentWwBlack level master pedestal adjustment Press the IRIS - buttonPress the Iris button several times to turn off its lamp QqHorizontal phase adjustment Genlock adjustment AW‑HE50S onlyWwGenlock adjustment QqColor phase adjustment Press the Mode buttonGenlock adjustment AW‑HE50S only Basic operations Table of operationsChanging Press the  or  button to change the setting Jog dial main Jog dial RQqProcedure for camera menu operation AW‑RP655 Press the Menu button for 2 seconds to exit the camera menuMode button lights up at the BAR setting Perform one of the following steps to select the menu item QqProcedure for camera menu operation AW‑RP555Press the Menu button of the AW‑RP555 for 2 seconds Press the Item buttonQqProcedure for camera menu operation AW‑RP50 Camera OSDWwTop Menu Setting the menu itemsWwSetting the menu items WwCamera screen When FullAuto is selected WwCamera screen When Manual1 to 3 is selectedWwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen WwSystem screenWwGenlock screen AW‑HE50S only WwOutput screenRGB-NOR Format Set screen QqChanging the formatFormat change check screen Format unchanged screenWwOther 1/2 screen WwOther 2/2 screen Tally Enable Disable, EnableWireless Control Disable, Enable OSD Off With Tally Off, OnWwMaintenance screen WwFirmware Version screenQqConcerning initialization Menu settings initialized screenMenu settings unchanged screen Initialize screenMenu Factory setting Selection items FullAuto Menu item tableWeb setting screen Control Setup WwMenu operations Control button / Setup button  Power on button / Standby buttonWwControl screen  Zoom  Focus Brightness  Preset Control pad and its buttons  Basic button WwSetup screenQqBasic screen QqImage screen Image  Image Image adjustPreset position Image adjust screen  Contrast Contrast Mode Auto, Manual  Scene FullAuto, Manual1, Manual2, Manual3 Picture Chroma Level -3 to +3 AWBPreset position setting screen  Preset  Zoom  Limitation Setting  Genlock AW‑HE50S only ENH setting instead  Output Other QqUser mng  Host check Host auth. screen  Host auth IP address QqServer IP address QqNetworkNetwork screen  IP network Port numbers already used 20, 21, 23, 25, 42, 53, 67, 68 Default gatewaySubnet mask Ddns screen  Password 0 to 32 half-size characters Access interval  Host name 1 to 64 half-size characters Location 0 to 32 half-size characters Snmp screen Community 0 to 32 half-size characters  Contact 0 to 255 half-size charactersSystem log screen QqMaintenance Error description  Time & dateUpgrade screen Click the Execute buttonEnter the software version in the xxxxx part  Load the default Html files setup menu Default reset screen Reset to the default Except the network settings  Reset to the default and load the default Html files Upload Back up screen Download Other screen Login-related displays DDNS-related error displaysNTP-related error displays Category Display Description of errorLimiters WwBasic limiter operations Setting/releasing the limitersWwSetting the limiters Press one of the CAM1 to CAM4 buttons to select the unitPp Releasing the upper limit position of the movement range WwResetting the limitersWwReleasing the limiters Pp Releasing the lower limit position of the movement rangeTrouble-triggered safe mode Safe modeWwConcerning the safe mode WwSystem requirements for a PC CPUSolution WwPrecautions when using Windows VistaSymptom Symptom Restriction When activating audio on the web browser QqRestrictionsWwPrecautions when using Windows Restriction 1 On the setup pages for some products Restriction 2 When using Windows 7 with some productsPanasonic Solutions Company
Related manuals
Manual 90 pages 20.69 Kb