Panasonic AWHE50HN manual Jog dial main, Jog dial R

Page 33

Basic operations

wwControl exercised from the Multi-Function Controller AW‑RP655

Each time the [MODE] button is pressed, the setting is switched between CAM and BAR. The [MODE] button lights up at the BAR setting.

This is used to switch between AUTO and MANU for the gain. The [GAIN] button lights when the AUTO setting is selected.

For switching WHITE BAL A,

B or ATW.

For executing AWB.

*1, *2

Jog dial (main)

When the LCD is in the gain adjustment mode ([GAIN] button: MANU)

Select the desired gain setting from GAIN 0 dB to 18 dB. *4

When the LCD is in the gain adjustment mode ([GAIN] button: AUTO)

Select the desired gain setting from AGC MAX GAIN 6 dB, 12 dB or 18 dB.

When the LCD is in the pedestal adjustment mode

Adjust the PEDESTAL TOTAL setting (–150 to +150). *5

When the camera menu mode is established

Perform the camera menu operations.

Each time the [EXT(AF)] button is pressed,

the focus setting is switched between auto focus and manual focus. When auto focus is selected, the [EXT(AF)] button lights.

When the focus setting is switched between auto focusing and manual focusing by the camera, the resulting status (lamp on or off) will not be reflected in the button.

The unit does not have an ABC function.

This is used to acquire the statuses of the camera and synchronize the data. *3

These are used for menu operation.

Jog dial (R)		For selecting the cameras
When the LCD is in the camera menu mode		to be operated.
Press the jog dial (R) to cancel the setting
Press the jog dial (R) to cancel the setting
change.

*1:	The AWC switch indicator blinks while the white	*4:	With this unit, the gain setting is reflected in
	balance is being adjusted. It goes off whether the		increments of 3 dB in the control.
	AWB adjustment is completed successfully or	*5:	With this unit, the setting is reflected in increments
	unsuccessfully.		of 15 dB in the control.
*2:	The switch lights without AWB being executed		On the camera menu, the setting is adjusted in
	when the white balance mode of the main unit is		range from –10 to +10.
	ATW, or when the Color Bar is being displayed.

*3: SCENE FILE, CAM/BAR, and GAINUP of each SCENE, as well as the W/B MODE and PED statuses are synchronized.

33

Image 33

Contents

AW‑HE50SN Contents Before use WwOverviewWwConcerning the Operating Instructions WwRequired personal computer environment WwTrademarks and registered trademarksWwAbout copyright and licence WwNetwork security WwDisclaimer of warrantyBasic shooting operations Select the shooting modeWwTurning the power on How to turn the power on and offSet the Operate switch on the controller to on When the AW‑RP50 is connectedSet the Operate switch on the controller to OFF WwTurning the power offSelecting the units Selecting the shooting modes scene filesWwTypes of shooting modes WwHow to select the shooting mode Turn the jog dial main Press the Menu buttonPress the OK button Press the OK button againQqSwitching the direction or zoom speed QqUsing the zoom functionShooting QqChanging the camera’s directionUnit does not move Lens focus is not adjusted automaticallyMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations Manual shooting WwManually adjusting the focusWwManually adjusting the iris Press the Shutter button and turn its lamp on WwManually adjusting the shutter speedWwManually adjusting the gain Press the OFF, LOW or HI buttonPress the Gain button to turn off its lamp Position may occur Preset memoriesSet the memory recording mode Set to the memory recording modeHold down the Reset button Hold down the Memory buttonWhen the AW‑RP555 is connected White balance adjustment WwWhite balance adjustmentQqAutomatic adjustment AWB AWB A or AWB B Press the AWC button Press the SET button for 2 secondsQqAuto tracking white adjustment ATW WwBlack level master pedestal adjustment Black level master pedestal adjustmentPress the M/IRIS button Press the IRIS - buttonPress the Iris button several times to turn off its lamp Genlock adjustment AW‑HE50S only WwGenlock adjustmentQqHorizontal phase adjustment Press the Mode button QqColor phase adjustment Genlock adjustment AW‑HE50S only Table of operations Basic operationsChanging Press the  or  button to change the setting Jog dial R Jog dial mainPress the Menu button for 2 seconds to exit the camera menu QqProcedure for camera menu operation AW‑RP655Mode button lights up at the BAR setting Press the Menu button of the AW‑RP555 for 2 seconds QqProcedure for camera menu operation AW‑RP555Perform one of the following steps to select the menu item Press the Item buttonCamera OSD QqProcedure for camera menu operation AW‑RP50Setting the menu items WwSetting the menu itemsWwTop Menu WwCamera screen When Manual1 to 3 is selected WwCamera screen When FullAuto is selectedWwContrast screen WwPicture 1/2 screen WwSystem screen WwPicture 2/2 screenWwOutput screen WwGenlock screen AW‑HE50S onlyRGB-NOR Format change check screen QqChanging the formatFormat Set screen Format unchanged screenWwOther 1/2 screen Wireless Control Disable, Enable Tally Enable Disable, EnableWwOther 2/2 screen OSD Off With Tally Off, OnWwFirmware Version screen WwMaintenance screenMenu settings unchanged screen Menu settings initialized screenQqConcerning initialization Initialize screenMenu item table Menu Factory setting Selection items FullAutoWeb setting screen WwMenu operations Control Setup Power on button / Standby button  Control button / Setup button Zoom  Focus WwControl screen Preset  Control pad and its buttons Brightness WwSetup screen QqBasic screen Basic button Image  Image Image adjust Preset positionQqImage screen Image adjust screen  Scene FullAuto, Manual1, Manual2, Manual3  Contrast Contrast Mode Auto, ManualAWB  Picture Chroma Level -3 to +3Preset position setting screen  Preset  Zoom  Limitation Setting  Genlock AW‑HE50S only  Output ENH setting instead Other QqUser mng Host auth. screen  Host auth  IP address Host check QqServer QqNetwork Network screen  IP networkIP address Default gateway Subnet maskPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68  Access interval  Password 0 to 32 half-size charactersDdns screen  Host name 1 to 64 half-size characters Community 0 to 32 half-size characters Snmp screen Location 0 to 32 half-size characters  Contact 0 to 255 half-size characters Error description QqMaintenanceSystem log screen  Time & dateClick the Execute button Upgrade screenEnter the software version in the xxxxx part  Reset to the default Except the network settings Default reset screen Load the default Html files setup menu  Reset to the default and load the default Html filesBack up screen  Download Upload Other screen NTP-related error displays DDNS-related error displaysLogin-related displays Category Display Description of errorLimiters WwSetting the limiters Setting/releasing the limitersWwBasic limiter operations Press one of the CAM1 to CAM4 buttons to select the unitWwReleasing the limiters WwResetting the limitersPp Releasing the upper limit position of the movement range Pp Releasing the lower limit position of the movement rangeSafe mode WwConcerning the safe modeTrouble-triggered safe mode CPU WwSystem requirements for a PCWwPrecautions when using Windows Vista SymptomSolution Symptom QqRestrictions Restriction When activating audio on the web browserWwPrecautions when using Windows Restriction 2 When using Windows 7 with some products Restriction 1 On the setup pages for some productsPanasonic Solutions Company

Related manuals

Manual 90 pages 20.69 Kb