Panasonic AWHE50HN manual WwSetting the menu items, WwTop Menu

wwSetting the menu items

When the unit’s settings are to be selected, the menus are displayed on the monitor.

The monitor is connected to the video signal output connector.

The basic menu operations involve displaying sub‑menus from the Top Menu items, and selecting settings on the sub‑menus.

Some sub‑menus have menu items for performing more detailed settings.

For details on the basic operations to display the menus and change the items using the wireless remote control or controller (AW‑RP655, AW‑RP555 or AW‑RP50), refer to pages 30 to 37.

The “ ” and “ ” marks in the menu titles indicate the hierarchical level of the menu currently displayed.

level is now displayed.

Menu items accompanied by a “ ” mark indicate data which is stored on a scene by scene basis; menu items accompanied by a “ ” mark indicate data which is stored together for one camera regardless of the scenes.

wwTop Menu

Maintenance

Camera

Select this to open the camera menu relating to the camera images.

System

Select this to display the System menu used to adjust the genlock (external synchronization) phase or establish the camera output image settings.

Maintenance

Select this to display the Maintenance menu used to check the camera’s firmware version or initialize its settings.

Note

ppThe Top Menu does not have a “Return” setting. To close the menu screen, use the controller to perform the operation to close the menu screen. For details, refer to pages 30 to 37.