Fujitsu ST4000 warranty Connectors and Peripheral Interfaces, Purpose

S t y l i s t i c S T 4 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n O n e

CONNECTORS AND PERIPHERAL INTERFACES

Connectors and peripheral interfaces on the Stylistic ST4000 Series Tablet PC allow the connection of a variety of devices. Specific locations are illustrated in Figures 1-2 through 1-5.

Table 1-6 provides a description of each peripheral connector on the Stylistic ST4000 Series Tablet PC. Each of the illustrated icons is either molded into or printed on the Tablet PC chassis.

Connector/	Tablet PC		Purpose
Peripheral		Icon
DC input			Connect an external power source such as the AC adapter or auto/
connector			airline adapter.
USB Port			Connect Universal Serial Bus 1.1 compliant devices to the Tablet PC.
PCMCIA			Install a Type I or Type II PC Card.
Card slot
Microphone			Connect an external microphone. The internal microphone is disabled
jack			when you plug in an external microphone.
Headphone			Connect stereo headphones or powered external speakers. The internal
jack			speaker is disabled when you plug in external headphones or powered
			speakers.
IrDA/FIR port			An infrared transceiver built into the Tablet PC allows you to
			communicate with other devices that are compliant with the IrDA
			Standard Rev. 1.1. Effective range for infrared communication is about

3feet, and within 15 degrees off center. A clear line-of-sight path must exist between the IrDA port on the Tablet PC and the IrDA transceiver on the other device.

Modem	Connect a telephone line to the optional internal modem using a
	standard RJ-11 telephone plug.
Tablet Dock	Connect the Stylistic ST4000 Series Tablet Dock or other approved
port	docking device. Refer to documentation accompanying the docking
	device for more information.
Infrared	An infrared receiver built into the Tablet PC allows you to communicate
keyboard/	with a wireless infrared keyboard or mouse. The keyboard infrared port
mouse port	works optimally when it is placed between 10 to 30 cm (approximately
	4 in. to 12 in.) from the keyboard infrared port (which is located on the
	bottom edge of the Tablet PC). Ensure there is a clear line-of-sight path
	between the infrared receiver on the Tablet PC and the infrared
	transmitter on the keyboard or mouse.
KensingtonTM	The Kensington MicrosaverTM security slot allows you to secure the
Lock slot	Tablet PC using Kensington-compatible locking devices.

14