Fujitsu ST4000 warranty Checking the full computer name and workgroup, Sharing

Item	Description
For	Select [Obtain an IP address
Infrastructure	automatically]:
Network	For the DNS server, select [Obtain
	DNS server address automatically].
	For the IP address, DNS server, and
	default gateway, follow the network
	administrator's instructions, if any.

Table 3: Setting an IP Address

6.Click [OK]. The [Local Area Connection Properties] window appears again.

7.Click [OK]. When a message appears prompting you to restart the computer, click [Yes].

Checking the full computer name and workgroup

1.Click [Start] -> [Settings] -> [Control Panel].

2.Double-click the [System] icon. [System Properties] appears.

3.Click the [Network Identification] tab.

4.Check [Full computer name] and [Workgroup]. Ask your network administrator and check the setting.

Item		Description
Full	A name to identify the computer on
Computer	the network. You can specify any
Name	name to each computer.
	For easier identification, use the model
	name or user name.
Workgroup	A name for the network group:
	■	AdHoc Network:
		Specify the same name to all com-
		puters within the same network.
	■	Infrastructure Network: Specify a
		workgroup name to connect to.
	To change the setting, click
	[Properties], and follow the instruc-
	tions on the screen. [System Proper-
	ties] appears again.

Table 4: Checking computer name and workgroup

5.Click [OK]. When a message appears prompting you to restart the computer, click [Yes].

W i r e l e s s L A N U s e r ’ s G u i d e

Sharing

In this section, you set sharing of the drive, folder, and printer.

You only need to set this when you are sharing files or a printer with other computers on the network.

When you share a drive, folder, or printer, you can use them from any computer on the network.

Setting [File and Printer Sharing for Microsoft Networks]

1.Click [Start] -> [Settings] -> [Control Panel].

2.Double-click the [Network and Dial-up Connections] icon. The [Network and Dial-up Connections] windows appears.

3.Right click the [Local Area Connection], then click [Properties] from the menu that appears. [Local Area Connection Properties] appears.

P O I N T

More than one network adapter is installed in your system if more than one [Local Area Connection] entry is displayed. In this case, select the [Local Area Connec- tion] entry with [Intersil PRISM Wireless LAN PCI Card] displayed under [Device Name].

4.If [File and Printer Sharing for Microsoft Networks] is displayed in the list, make sure that it is checked. If it is not checked, check it and click [OK]. You do not have to perform the following steps. Go to the next section, entitled “Sharing Files.”

If [File and Printer Sharing for Microsoft Networks] is not found in the list, click [Install], and perform Step 5 and subsequent steps. When you click [Install], the [Select Network Component Type] window appears.

5.Perform the following steps.

■Click [Service].

■Click [Add]. The [Select Network Service] window appears.

6.Perform the following steps.

■Click [File and Printer Sharing for Microsoft Networks].

■Click [OK]. You will go back to [Local Area Connec- tion Properties], and [File and Printer Sharing for Microsoft Networks] is added to the list.

7.Click [OK].

P O I N T

If you have changed the setting, [Close] is shown instead. Click [Close].

49