Fujitsu ST4000 Sharing Files, Printer Sharing, Checking the Connection, Checking the Connectivity

S t y l i s t i c S T 4 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x

Sharing Files

The following example shows how to set sharing the “Work” folder on the c: drive.

1.On the desktop, double-click [My Computer]-> C: drive.

2.Right-click the “Work” folder, then click [Sharing] from the menu. The [Work Properties] window appears.

3.Click [Share this folder] and set necessary items, as indicated in the following table.

Item	Description
Share name	You can specify a share name for the
	drive or folder that you want to share.
Comment	You can enter the description for the
	drive or folder that you want to share.
User limit	Specifies the limit for the number of
	sharing users.
Permissions	Specifies the folder access privileges.
Caching	Specifies the caching for the folder.

Table 5: Sharing files

4.Click [OK]. The folder is set shared, and the “Work” folder icon changes.

Printer Sharing

1.Click [Start] -> [Settings] -> [Printers]. The Printers window appears, showing the printers that are connected.

2.Right click the printer that you want to share, then click [Sharing] from the menu that appears.

3.Click [Sharing], and select necessary items.

Item		Description
Not Shared		Disables printer sharing.
Shared As		Enables printer sharing.
Share Name		Specifies a share name of the
		printer to be shared.
Comment		Enter the description of the printer
		to be shared.
Passwords		If you specify a password, you
		need to enter it when using the
		printer.
	Table 6: Printer Sharing

Checking the Connection

After the network setting is completed, access the shared drive on another computer to check the connectivity of the wireless LAN network.

Accessing Another Computer

1.Double-click the [My Network Places] icon on the desktop. [My Network Places] appears.

2.Double-click [Computers near me]. The computers that are connected to the network are displayed.

3.Double-click the computer that you want to access. The drive that you set with “Sharing” are displayed.

4.Double-click the drive that you want to access. The drive is displayed showing its contents and made available to you. If you have any questions or prob- lems, refer to “Troubleshooting Table” on page 55.

Checking the Connectivity

1.Click [Start] -> [Settings] -> [Control Panel].

2.Double-click the [PRISM Settings] icon. [PRISM Wireless Settings] appears.

3.Check the connectivity on the [Link] tab. The current condition of connection is displayed.

Item	Description
State	Shows the current condition of
	connection.
	The MAC address of the other
	computer to which you are
	connected is displayed when the
	connection is successful. If you are
	connected to more than one
	computer, the computer that has
	the best connectivity is displayed.
Current Channel	Shows the current channel used
	for the connection.
Current Tx Rate	Shows the current transfer rate in
	Mbits/sec.
[Radio Off]/	Click [Radio Off] to disconnect.
[Radio On]	Click [Radio On] to connect to the
	network.
[Rescan] button	Click this button to search for
	others to connect to.
Throughput	Shows the actual transfer rate of
(Bytes/sec)	the data transfer for send (Tx) and
	receive (Rx).

4.Click [OK]. The printer sharing is set, and the icon changes.

50