Fujitsu FMW4503TS128A01 manual Result Codes Summary, Result Code Numeric Description

Result Codes Summary

Result Code	Numeric	Description
OK	0	Command executed.
CONNECT	1	Modem connected to line.
RING	2	A ring signal has been detected.
NO CARRIER	3	Modem lost carrier signal, or does not detect carrier
		signal, or does not detect answer tone.
ERROR	4	Invalid command.
NO DIALTONE	6	No dial tone detected.
BUSY	7	Busy signal detected.
NO ANSWER	8	No quiet answer.
CONNECT 2400 EC*	10	Connection at 2400 bits/s.
CONNECT 4800 EC*	11	Connection at 4800 bits/s.
CONNECT 9600 EC*	12	Connection at 9600 bits/s.
CONNECT 14400 EC*	13	Connection at 14400 bits/s.
CONNECT 19200 EC*	14	Connection at 19200 bits/s.
CONNECT 7200 EC*	24	Connection at 7200 bits/s.
CONNECT 12000 EC*	25	Connection at 12000 bits/s.
CONNECT 16800 EC*	86	Connection at 16800 bits/s.
CONNECT 300 EC*	40	Connection at 300 bits/s.
CONNECT 21600 EC*	55	Connection at 21600 bits/s.
CONNECT 24000 EC*	56	Connection at 24000 bits/s.
CONNECT 26400 EC*	57	Connection at 26400 bits/s.
CONNECT 28800 EC*	58	Connection at 28800 bits/s.
CONNECT 31200 EC*	59	Connection at 31200 bits/s.
CONNECT 33600 EC*	60	Connection at 33600 bits/s.
CONNECT 38400 EC*	28	Connection at 38400 bits/s. (DTE rate)
CONNECT 57600 EC*	18	Connection at 57600 bits/s. (DTE rate)
CONNECT 115200 EC*	87	Connection at 115200 bits/s. (DTE rate)
DELAYED	88	Delay is in effect for the dialed number.
BLACKLISTED	89	Dialed number is blacklisted.
BLACKLIST FULL	90	Blacklist is full.
CONNECT 32000 EC*	70	Connection at 32000 bits/s. (K56flex or V.90 mode)
CONNECT 34000 EC*	71	Connection at 34000 bits/s. (K56flex mode)
CONNECT 03600 EC*	72	Connection at 36000 bits/s. (K56flex or V.90 mode)

Result Codes Summary 90