Fujitsu FMW4503TS128A01 Serial/Parallel Port Configuration Submenu Options, 3F8 3FF, 2E8 2EF

Page 21

Serial/Parallel Port Configuration Submenu Options

Configuration options for the Serial/Parallel Port Configuration submenu are given in Table 3-4.Note that some peripheral interfaces are only available when using a device attached to the system interface port such as the mini-dock.

Table 3-4. Serial/Parallel Port Configurations Submenu Options

Option

Settings

Description

 

 

 

Serial Port

Disabled

Determines whether the serial port is active and the

 

Enabled

method used to configure the serial port.

 

Auto

 

 

 

Select [Auto] to allow the BIOS or operating system

 

 

to configure the port automatically.

 

 

Select [Enabled] to configure the Base I/O Address

 

 

and Interrupt options manually in BIOS setup.

 

 

Select [Disabled] to turn serial port A off.

 

 

 

I/O Address

3F8 - 3FF

Determines the base I/O address used for the serial

 

2F8 - 2FF

port. The Serial Port option must be set to [Enabled]

 

3E8 - 3EF

before this setting can be changed.

 

2E8 - 2EF

 

 

 

 

Interrupt

IRQ 3

Determines the interrupt request level used for the

 

IRQ 4

serial port. The Serial Port option must be set to

 

 

[Enabled] before this setting can be changed.

 

 

 

Infrared Port

Disabled

Determines whether the infrared port is active and

 

Enabled

the method used to configure the infrared port.

 

Auto

 

 

 

Select [Auto] to allow the BIOS or operating system

 

 

to configure the port automatically.

 

 

Select [Enabled] to configure the I/O Address and

 

 

Interrupt options manually in BIOS setup.

 

 

Select [Disabled] to turn off the infrared port.

 

 

 

Mode

IrDA

Determines which physical interface the infrared port

 

FIR

is assigned to. Select IrDA to use the IrDA port in

 

 

Standard IR (SIR) mode (115 Kbps). Select FIR to

 

 

use the IrDA port in Fast IR mode (4 Mbps).

 

 

 

I/O Address

3F8 - 3FF

Determines the base I/O address used for the

 

2F8 - 2FF

infrared port. The Infrared Port option must be set to

 

3E8 - 3EF

[Enabled] before this setting can be changed.

 

2E8 - 2EF

 

 

 

 

Interrupt

IRQ 3

Determines the interrupt request level used for the

 

IRQ 4

infrared port. The Infrared Port option must be set to

 

 

[Enabled] before this setting can be changed.

 

 

 

I/O Address

100 - 107

Determines the base I/O address for the infrared

 

108 - 10F

port. This option is only selectable when the Infrared

 

110 - 117

Port Mode setting is FIR.

 

118 - 11F

 

 

 

 

BIOS Setup

11

Image 21
Contents Technical Reference Guide Declaration of Conformity Table of Contents Chapter Installing Hardware Options Chapter System Power Figure A-1 IDE Hard Disk Drive Cover Plate List of FiguresVii List of TablesAbout This Guide OrganizationViii Stylistic 3500 User’s Guide Related DocumentationTechnical Support PC Card Support Pen Tablet FeaturesInternal LAN/Modem Acpi SupportSystem Software Overview of System Configuration Tools and UtilitiesSupported Operating Systems Pen SupportPhdisk Windows 98 and Windows NT only Pen Configuration Configuring the Stylistic 3500 Pen Tablet SystemPermanent and Current Bios Settings Pen SubsystemsStarting Bios Setup Bios SetupBios Setup Screen Using Bios SetupExiting Bios Setup Bios Setup Main Menu Options Bios Setup Main Menu OptionsOption Settings Description 44/1.2 MBPrimary Master Submenu Options Bios Setup Primary Master Configuration OptionsBios Setup Advanced Menu Options Advanced Menu OptionsYes Serial/Parallel Port Configurations Submenu Options Serial/Parallel Port Configuration Submenu Options3F8 3FF 2E8 2EFBidirectional DMAECP 378 37FKeyboard/Mouse Features Submenu Options Keyboard/Mouse Features Submenu OptionsOff Disabled Video Features Submenu OptionsVideo Submenu Options Internal Flat PanelInternal Device Configurations Submenu Options Internal Device Configurations SubmenuPCI Configuration Submenu PCI Configuration Submenu OptionsAvailable CPU Features Submenu Options CPU Features SubmenuEvent Logging Submenu 10. Event Logging Submenu OptionsSecurity Menu Options 11. Bios Setup Security Menu OptionsNormal AllOwner Information Submenu Hard Disk Security Submenu12. Hard Disk Security Submenu Options 13. Owner Information Submenu OptionsPower Menu Options 14. Bios Setup Power Savings OptionsCustomized Suspend MinutesAdvanced Features Options Submenu 15. Bios Advanced Features Options SubmenuMaximum Power Savings Boot Device Priority Submenu Boot Menu Options16. Bios Setup Boot Menu Options 17. Bios Setup Boot Sequence Submenu19. Bios Setup Exit Menu Options 18. Bios Setup Info MenuInfo Menu Exit Menu OptionsUsing Cmosrdwr Saving a Bios Configuration Using CmosrdwrRestoring a Bios Configuration 20. Phdisk Command Line Options Command Line OptionsPhdisk Hard Disk Preparation Utility Option Parameters DescriptionCreate Option Info PartitionReformat Partition Automatic Memory Size Calculation Reformat Option Command Description21. Phdisk /CREATE Option 22. Phdisk /REFORMAT OptionInfo Option Delete Option23. Phdisk /DELETE Option 24. Phdisk /INFO OptionPhdisk Sign-on Message MessagesSave to Disk Partition Exists Not Enough System Memory Installing a PC Card Installing Hardware OptionsRemoving a PC Card Installing a Dimm CardRemoving a Dimm Card Removing a Dimm CardGeneral Specifications Hardware SpecificationsLogic System Specifications Feature Specification CommentsDisplay Specifications Display SpecificationsResolution Colors External Video CapabilitiesDigitizer Specifications Digitizer SpecificationsTechnology Notice Peripheral Interface Specifications Peripheral Interface SpecificationsUSB Power System Specifications Power System SpecificationsEnvironmental Specifications Physical SpecificationsAgency Approval Specifications Internal LAN/Modem Specifications 10. Internal LAN/Modem SpecificationsCSMA/CD Internal LAN/Modem Specifications Port Replicator/Mini-Dock Specifications 11. Stylistic 3500 Port Replicator/Mini-Dock SpecificationsPcmcia Peripheral Interfaces Connector Position Locations SignalHigh Usage Contacts Metal ContactsSerial Port Connector Pin Assignments DC Power InputDC Power Input Connector Pin Assignments Serial PortFloppy Disk Drive Connector Pin Assignments Connector Pin Locations Signal Signal Description NameFloppy Disk Drive Port Universal Serial Bus Port Contact Pin Locations Signal Name Signal Description NumberUniversal Serial Bus Port Contact Pin Assignments DataSystem Interface Port System Interface Port Connector On Pen TabletPin Signal Level Description Port or Connector Name System Interface Port Connector Pin AssignmentsPcmvcc BresetBWP BBVD1FINDEX# FWG#FRDDT# Vgagnd DdcdataGND Lanrx LAN BiowrLANRX+ Usbgnd GNDDdcclk VgagndVgag SinaUSBP+ USB DATA+ UsbvccUsbp USB Data FDCHG#PPE PslctPRD4 BBVD2IrDA Port IrDA Port SpecificationsAudio Jacks Active Audio InputsActive Audio Outputs PC Card Port 10. PC Card Port Pin AssignmentsBit PC Card Interface CardBus Pin Memory-Only CAD18 CCBE2#CAD20 CAD21CFRAME# CTRDY#CAD17 CAD19Hard Disk Drive Port HDD side PCB side Signal Name Pin NumberHstrobe DIOR# / HDMARDY#Iordy / #DDMARDY DstrobeSystem Power System Power HardwareBattery Pack DC Input Connectors DC Power InputsBios Configuration Application Programming Interfaces Version InformationSummary of Functions UpdateBIOSCheckSum InitializeBIOSReadBIOSSettings BiosSetupSetBios Configuration API Error Codes Error CodesParallel Port Address Option and Setting Parameters and Return ValuesCompens Dispenb Hotpad Notification Programmable Hotpad Libraries for Windows ApplicationsKillHotpadNotification SetHotpadNotificationRemoving the Hard Disk Drive Replacing the IDE Hard Disk DriveFigure A-2 Unplugging the Hard Disk Drive Connector Figure A-3 Removing the Hard Disk Drive, Part Figure A-5 Installing the IDE Hard Disk Drive Installing the Hard Disk DriveStart bit Data bit Parity Stop bit AT Command SetAT Commands Table AT Data CommandsCommand Specification Default Not displays Command Specification Default Command Specification Default Command Specification Default Modulation by parameter AT Fax Class1 CommandsCommand Specification Description 25ter AT CommandsRegister Table Reg Function Units Default RangeATX1 ATX0ATX2 ATX3Register Table Result Code Numeric Description Result Codes SummaryConnect 40000 EC Connect 38000 ECConnect 42000 EC Connect 44000 ECFCC Notices Agency NoticesDOC Industry Canada Compliance Notices Avis Aux Utilisateurs Du Réseau Téléphonique Canadien Avertissement Index-1 IndexIndex-2 Index-3 Index-4 FPC58-0473-01